You are welcome, Ed. Let us know how it works out.
At 12:49 PM 3/25/2010, you wrote: > > >Hi Kevin, > >This unit should work very nicely. I haven't been able to find size >measurements for the mixer but, from the descriptions, it's quite small. I >found several new units on eBay for less than $30. Thanks a lot. > >Take care > >Ed Przybylek > >_____ > >From: ><mailto:blindhandyman%40yahoogroups.com>blindhandyman@yahoogroups.com >[mailto:blindhandy...@yahoogroups.com] >On Behalf Of Kevin Doucet >Sent: Wednesday, March 24, 2010 3:05 PM >To: <mailto:blindhandyman%40yahoogroups.com>blindhandyman@yahoogroups.com >Subject: Re: [BlindHandyMan] Audio Mixer > >Hi Edward, > >If I understand that you are using a set of >computer speakers which have volume control, this might just be what you >want. > >It is the Behringer MX-400 and sells for just under $50 U.S. > >You can check it out at the link below; > ><http://www.behringe>http://www.behringe ><http://www.behringer.com/EN/Products/MX400.aspx> >r.com/EN/Products/MX400.aspx > >At 01:23 PM 3/24/2010, you wrote: > > > > > >Hi all, > > > >I currently have two sound cards installed in my computer. I'd like to > >combine the outputs of the two cards so that both cards can be played > >through a single set of speakers. I'm told the best way to do this is to > >use an audio mixer. My problem is that I'm beginning to run out of desk > >space and that's why I'm hoping some really small mixers exist. This is a > >fairly simple application that requires minimal complexity so I really >don't > >need anything like a professional unit or one that has the capability to > >perform any and all audio mixing functions. All I need to do is combine two > >stereo outputs into a single set of speakers while maintaining reasonable > >sound quality. If anyone knows of a very small and simple mixer that will > >serve this purpose, I would greatly appreciate hearing about it. Thanks a > >lot. > > > >Take care, > > > >Ed Przybylek > > > >[Non-text portions of this message have been removed] > > > > > >[Non-text portions of this message have been removed] > >[Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed]