On Mon, Jan 15, 2024 at 08:58:52AM +0100, Mizsei Zoltán wrote: > Thanks, that did the trick, see new dmesg below. Would it possible to enable > iwn* in the upstream sources? > > Best Regards, > --Zoltan >
I think that should be doable. Mark, Patrick, any objections (and if no, do we want iwm in there too?) -ml > linkstar$ uname -a > OpenBSD linkstar.extrowerk.com 7.4 GENERIC.MP#1 arm64 > linkstar$ dmesg > OpenBSD 7.4 (GENERIC.MP) #1: Mon Jan 15 04:02:12 CET 2024 > szil...@linkstar.extrowerk.com:/sys/arch/arm64/compile/GENERIC.MP > real mem = 3959590912 (3776MB) > avail mem = 3759493120 (3585MB) > random: good seed from bootblocks > mainbus0 at root: HINLINK OPC-H68K Board > psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND > efi0 at mainbus0: UEFI 2.7 > efi0: EDK2 rev 0x10000 > smbios0 at efi0: SMBIOS 3.3.0 > smbios0: vendor EDK2 version "miq" date 12/16/2023 > smbios0: Firefly Firefly ROC-RK3568-PC > cpu0 at mainbus0 mpidr 0: ARM Cortex-A55 r2p0 > cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu0: 512KB 64b/line 16-way L2 cache > cpu0: > DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS > cpu1 at mainbus0 mpidr 100: ARM Cortex-A55 r2p0 > cpu1: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu1: 512KB 64b/line 16-way L2 cache > cpu1: > DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS > cpu2 at mainbus0 mpidr 200: ARM Cortex-A55 r2p0 > cpu2: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu2: 512KB 64b/line 16-way L2 cache > cpu2: > DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS > cpu3 at mainbus0 mpidr 300: ARM Cortex-A55 r2p0 > cpu3: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu3: 512KB 64b/line 16-way L2 cache > cpu3: > DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS > scmi0 at mainbus0: SCMI 2.0 > apm0 at mainbus0 > agintc0 at mainbus0 mbi shift 4:4 nirq 352 nredist 4 ipi: 0, 1, 2: > "interrupt-controller" > syscon0 at mainbus0: "syscon" > rkiovd0 at syscon0 > syscon1 at mainbus0: "syscon" > syscon2 at mainbus0: "syscon" > syscon3 at mainbus0: "syscon" > syscon4 at mainbus0: "syscon" > syscon5 at mainbus0: "syscon" > syscon6 at mainbus0: "syscon" > rkclock0 at mainbus0: PMUCRU > rkclock1 at mainbus0: CRU > syscon7 at mainbus0: "power-management" > "power-controller" at syscon7 not configured > syscon8 at mainbus0: "qos" > syscon9 at mainbus0: "qos" > syscon10 at mainbus0: "qos" > syscon11 at mainbus0: "qos" > syscon12 at mainbus0: "qos" > syscon13 at mainbus0: "qos" > syscon14 at mainbus0: "qos" > syscon15 at mainbus0: "qos" > syscon16 at mainbus0: "qos" > syscon17 at mainbus0: "qos" > syscon18 at mainbus0: "qos" > syscon19 at mainbus0: "qos" > syscon20 at mainbus0: "qos" > syscon21 at mainbus0: "qos" > syscon22 at mainbus0: "qos" > syscon23 at mainbus0: "qos" > syscon24 at mainbus0: "qos" > syscon25 at mainbus0: "qos" > syscon26 at mainbus0: "qos" > syscon27 at mainbus0: "qos" > syscon28 at mainbus0: "qos" > syscon29 at mainbus0: "qos" > syscon30 at mainbus0: "qos" > syscon31 at mainbus0: "qos" > rkcomphy0 at mainbus0 > rkcomphy1 at mainbus0 > rkusbphy0 at mainbus0: phy 0 > rkusbphy1 at mainbus0: phy 1 > rkpinctrl0 at mainbus0: "pinctrl" > rkgpio0 at rkpinctrl0 > rkgpio1 at rkpinctrl0 > rkgpio2 at rkpinctrl0 > rkgpio3 at rkpinctrl0 > rkgpio4 at rkpinctrl0 > syscon32 at mainbus0: "syscon" > syscon33 at mainbus0: "qos" > syscon34 at mainbus0: "qos" > syscon35 at mainbus0: "qos" > syscon36 at mainbus0: "syscon" > rkpciephy0 at mainbus0 > rkcomphy2 at mainbus0 > "fit-images" at mainbus0 not configured > "opp-table-0" at mainbus0 not configured > "display-subsystem" at mainbus0 not configured > "firmware" at mainbus0 not configured > "opp-table-1" at mainbus0 not configured > simpleaudio0 at mainbus0 > "pmu" at mainbus0 not configured > agtimer0 at mainbus0: 24000 kHz > "xin24m" at mainbus0 not configured > "xin32k" at mainbus0 not configured > "sram" at mainbus0 not configured > xhci0 at mainbus0, xHCI 1.10 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev > 3.00/1.00 addr 1 > ehci0 at mainbus0 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev > 2.00/1.00 addr 1 > ohci0 at mainbus0: version 1.0 > ehci1 at mainbus0 > usb2 at ehci1: USB revision 2.0 > uhub2 at usb2 configuration 1 interface 0 "Generic EHCI root hub" rev > 2.00/1.00 addr 1 > ohci1 at mainbus0: version 1.0 > rkiic0 at mainbus0 > iic0 at rkiic0 > fanpwr0 at iic0 addr 0x1c: TCS4525, 1.15 VDC > rkpmic0 at iic0 addr 0x20: RK809 > rkpwm0 at mainbus0rkclock_get_frequency(rkclock0, 13) > : no clock > "gpu" at mainbus0 not configured > "video-codec" at mainbus0 not configured > "iommu" at mainbus0 not configured > "rga" at mainbus0 not configured > "video-codec" at mainbus0 not configured > "iommu" at mainbus0 not configured > dwqe0 at mainbus0 gmac 1: rev 0x00, address 3e:68:a7:8e:7e:25 > rgephy0 at dwqe0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6 > "vop" at mainbus0 not configured > "iommu" at mainbus0 not configured > "hdmi" at mainbus0 not configured > dwpcie0 at mainbus0 > dwmmc0 at mainbus0: 50 MHz base clock > sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma > dwmshc0 at mainbus0 > dwmshc0: SDHC 4.20, 200 MHz base clock > sdmmc1 at dwmshc0: 8-bit, sd high-speed, mmc high-speed, dma > "i2s" at mainbus0 not configured > "i2s" at mainbus0 not configured > "dma-controller" at mainbus0 not configured > "dma-controller" at mainbus0 not configured > rkiic1 at mainbus0 > iic1 at rkiic1 > "watchdog" at mainbus0 not configured > com0 at mainbus0: dw16550, 64 byte fifo > rktemp0 at mainbus0 > "saradc" at mainbus0 not configured > ahci0 at mainbus0: AHCI 1.3 > scsibus0 at ahci0: 32 targets > dwpcie1 at mainbus0 > dwpcie2 at mainbus0 > dwqe1 at mainbus0 gmac 0: rev 0x00, address 3e:68:a7:8e:7e:24 > rgephy1 at dwqe1 phy 0: RTL8169S/8110S/8211 PHY, rev. 6 > rkrng0 at mainbus0: ver 2 > "hdmi-con" at mainbus0 not configured > gpiokeys0 at mainbus0: "reset" > gpioleds0 at mainbus0: no LEDs > "vcc12v-dcin" at mainbus0 not configured > "vcc3v3-sys" at mainbus0 not configured > "vcc5v0-sys" at mainbus0 not configured > "vcc5v0-usb" at mainbus0 not configured > "vcc5v0-usb-host" at mainbus0 not configured > "vcc3v3-pcie" at mainbus0 not configured > simpleaudio1 at mainbus0 > pwmfan0 at mainbus0 > simplefb0 at mainbus0: 3840x2160, 32bpp > wsdisplay0 at simplefb0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > usb3 at ohci0: USB revision 1.0 > uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev > 1.00/1.00 addr 1 > usb4 at ohci1: USB revision 1.0 > uhub4 at usb4 configuration 1 interface 0 "Generic OHCI root hub" rev > 1.00/1.00 addr 1 > pci0 at dwpcie0 > ppb0 at pci0 dev 0 function 0 "Rockchip RK3566" rev 0x00 > pci1 at ppb0 bus 1 > iwn0 at pci1 dev 0 function 0 "Intel WiFi Link 1030" rev 0x1a: msi, MIMO > 2T2R, AGN, address 08:d4:0c:13:a0:65 > pci2 at dwpcie1 > ppb1 at pci2 dev 0 function 0 "Rockchip RK3566" rev 0x00 > pci3 at ppb1 bus 1 > rge0 at pci3 dev 0 function 0 "Realtek RTL8125" rev 0x05: msi, address > 00:00:00:00:00:00 > pci4 at dwpcie2 > ppb2 at pci4 dev 0 function 0 "Rockchip RK3566" rev 0x00 > pci5 at ppb2 bus 1 > rge1 at pci5 dev 0 function 0 "Realtek RTL8125" rev 0x05: msi, address > 00:00:00:00:00:00 > scsibus1 at sdmmc0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <SD/MMC, NCard, 0010> removable > sd0: 14910MB, 512 bytes/sector, 30535680 sectors > sdmmc1: can't enable card > sdhc_sdclk_frequency_select: command in progress > umass0 at uhub0 port 2 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev > 3.20/1.00 addr 2 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd1 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable > serial.0781558381075e2a041c > sd1: 29340MB, 512 bytes/sector, 60088320 sectors > uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB Keyboard" > rev 1.10/64.02 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > uhidev1 at uhub4 port 1 configuration 1 interface 1 "Logitech USB Keyboard" > rev 1.10/64.02 addr 2 > uhidev1: iclass 3/0, 5 report ids > ucc0 at uhidev1 reportid 1: 2 usages, 3 keys, enum > wskbd1 at ucc0 mux 1 > wskbd1: connecting to wsdisplay0 > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > ucc1 at uhidev1 reportid 3: 21 usages, 14 keys, enum > wskbd2 at ucc1 mux 1 > wskbd2: connecting to wsdisplay0 > uhid1 at uhidev1 reportid 5: input=0, output=0, feature=5 > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > root on sd1a (d9b3f31cd079d97e.a) swap on sd1b dump on sd1b > WARNING: bad clock chip time > WARNING: CHECK AND RESET THE DATE! > linkstar$ ifconfig > lo0: flags=2008049<UP,LOOPBACK,RUNNING,MULTICAST,LRO> mtu 32768 > index 7 priority 0 llprio 3 > groups: lo > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7 > inet 127.0.0.1 netmask 0xff000000 > dwqe0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu 1500 > lladdr 3e:68:a7:8e:7e:25 > index 1 priority 0 llprio 3 > media: Ethernet autoselect (none) > status: no carrier > dwqe1: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu 1500 > lladdr 3e:68:a7:8e:7e:24 > index 2 priority 0 llprio 3 > media: Ethernet autoselect (none) > status: no carrier > iwn0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu 1500 > lladdr 08:d4:0c:13:a0:65 > index 3 priority 4 llprio 3 > groups: wlan egress > media: IEEE802.11 autoselect (HT-MCS0 mode 11n) > status: active > ieee80211: join Linksys chan 1 bssid 50:eb:f6:83:09:cc -88dBm wpakey > wpaprotos wpa2 wpaakms psk wpaciphers ccmp wpagroupcipher ccmp > inet 192.168.1.226 netmask 0xffffff00 broadcast 192.168.1.255 > rge0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu 1500 > lladdr 3e:68:a7:8e:7e:23 > index 4 priority 0 llprio 3 > media: Ethernet autoselect > status: no carrier > rge1: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu 1500 > lladdr 3e:68:a7:8e:7e:22 > index 5 priority 0 llprio 3 > groups: egress > media: Ethernet autoselect (1000baseT full-duplex) > status: active > inet 192.168.1.181 netmask 0xffffff00 broadcast 192.168.1.255 > enc0: flags=0<> > index 6 priority 0 llprio 3 > groups: enc > status: active > pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33136 > index 8 priority 0 llprio 3 > groups: pflog > linkstar$ > > Mike Larkin írta 2024. jan.. 14, V-n 21:28 órakor: > > On Sun, Jan 14, 2024 at 09:13:54PM +0100, Mizsei Zoltán wrote: > >> Hi, > >> > >> I have messing with OpenBSD current on my LinkStar H68K ARM box, based on > >> the Rockchip RK3568 SOC. Originally it had an unsupported Mediatek wlan > >> card, which i have replaced it with an intel one i had lying around. > >> While OBSD recognizes the installed card, it categorically states it is > >> not-configured, while it supposed to be supported by the iwn driver. > >> > >> Sadly i did not made any photo about the card i have installed, and the > >> device is tricky to disassemble, but AFAIR the installed card is 0x8086, > >> 0x088f, "Intel Centrino Advanced-N 6235. What could cause a device > >> mis-recognition? > >> > >> Any idea what's going on here? > >> > >> Best Regards, > >> --Zoltan > >> > > > > iwn* at pci? is not in arm64 GENERIC. > > > > You might try adding that line to /sys/arch/arm64/conf/GENERIC (look for iwx > > just toss it after that). It might work. > > > > -ml > > > >> OpenBSD 7.4-current (GENERIC.MP) #40: Wed Jan 10 02:01:40 MST 2024 > >> dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP > >> real mem = 3959590912 (3776MB) > >> avail mem = 3755196416 (3581MB) > >> random: good seed from bootblocks > >> mainbus0 at root: HINLINK OPC-H68K Board > >> psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND > >> efi0 at mainbus0: UEFI 2.7 > >> efi0: EDK2 rev 0x10000 > >> smbios0 at efi0: SMBIOS 3.3.0 > >> smbios0: vendor EDK2 version "miq" date 12/16/2023 > >> smbios0: Firefly Firefly ROC-RK3568-PC > >> cpu0 at mainbus0 mpidr 0: ARM Cortex-A55 r2p0 > >> cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > >> cpu0: 512KB 64b/line 16-way L2 cache > >> cpu0: > >> DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS > >> cpu1 at mainbus0 mpidr 100: ARM Cortex-A55 r2p0 > >> cpu1: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > >> cpu1: 512KB 64b/line 16-way L2 cache > >> cpu1: > >> DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS > >> cpu2 at mainbus0 mpidr 200: ARM Cortex-A55 r2p0 > >> cpu2: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > >> cpu2: 512KB 64b/line 16-way L2 cache > >> cpu2: > >> DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS > >> cpu3 at mainbus0 mpidr 300: ARM Cortex-A55 r2p0 > >> cpu3: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > >> cpu3: 512KB 64b/line 16-way L2 cache > >> cpu3: > >> DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS > >> scmi0 at mainbus0: SCMI 2.0 > >> apm0 at mainbus0 > >> agintc0 at mainbus0 mbi shift 4:4 nirq 352 nredist 4 ipi: 0, 1, 2: > >> "interrupt-controller" > >> syscon0 at mainbus0: "syscon" > >> rkiovd0 at syscon0 > >> syscon1 at mainbus0: "syscon" > >> syscon2 at mainbus0: "syscon" > >> syscon3 at mainbus0: "syscon" > >> syscon4 at mainbus0: "syscon" > >> syscon5 at mainbus0: "syscon" > >> syscon6 at mainbus0: "syscon" > >> rkclock0 at mainbus0: PMUCRU > >> rkclock1 at mainbus0: CRU > >> syscon7 at mainbus0: "power-management" > >> "power-controller" at syscon7 not configured > >> syscon8 at mainbus0: "qos" > >> syscon9 at mainbus0: "qos" > >> syscon10 at mainbus0: "qos" > >> syscon11 at mainbus0: "qos" > >> syscon12 at mainbus0: "qos" > >> syscon13 at mainbus0: "qos" > >> syscon14 at mainbus0: "qos" > >> syscon15 at mainbus0: "qos" > >> syscon16 at mainbus0: "qos" > >> syscon17 at mainbus0: "qos" > >> syscon18 at mainbus0: "qos" > >> syscon19 at mainbus0: "qos" > >> syscon20 at mainbus0: "qos" > >> syscon21 at mainbus0: "qos" > >> syscon22 at mainbus0: "qos" > >> syscon23 at mainbus0: "qos" > >> syscon24 at mainbus0: "qos" > >> syscon25 at mainbus0: "qos" > >> syscon26 at mainbus0: "qos" > >> syscon27 at mainbus0: "qos" > >> syscon28 at mainbus0: "qos" > >> syscon29 at mainbus0: "qos" > >> syscon30 at mainbus0: "qos" > >> syscon31 at mainbus0: "qos" > >> rkcomphy0 at mainbus0 > >> rkcomphy1 at mainbus0 > >> rkusbphy0 at mainbus0: phy 0 > >> rkusbphy1 at mainbus0: phy 1 > >> rkpinctrl0 at mainbus0: "pinctrl" > >> rkgpio0 at rkpinctrl0 > >> rkgpio1 at rkpinctrl0 > >> rkgpio2 at rkpinctrl0 > >> rkgpio3 at rkpinctrl0 > >> rkgpio4 at rkpinctrl0 > >> syscon32 at mainbus0: "syscon" > >> syscon33 at mainbus0: "qos" > >> syscon34 at mainbus0: "qos" > >> syscon35 at mainbus0: "qos" > >> syscon36 at mainbus0: "syscon" > >> rkpciephy0 at mainbus0 > >> rkcomphy2 at mainbus0 > >> "fit-images" at mainbus0 not configured > >> "opp-table-0" at mainbus0 not configured > >> "display-subsystem" at mainbus0 not configured > >> "firmware" at mainbus0 not configured > >> "opp-table-1" at mainbus0 not configured > >> simpleaudio0 at mainbus0 > >> "pmu" at mainbus0 not configured > >> agtimer0 at mainbus0: 24000 kHz > >> "xin24m" at mainbus0 not configured > >> "xin32k" at mainbus0 not configured > >> "sram" at mainbus0 not configured > >> xhci0 at mainbus0, xHCI 1.10 > >> usb0 at xhci0: USB revision 3.0 > >> uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev > >> 3.00/1.00 addr 1 > >> ehci0 at mainbus0 > >> usb1 at ehci0: USB revision 2.0 > >> uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev > >> 2.00/1.00 addr 1 > >> ohci0 at mainbus0: version 1.0 > >> ehci1 at mainbus0 > >> usb2 at ehci1: USB revision 2.0 > >> uhub2 at usb2 configuration 1 interface 0 "Generic EHCI root hub" rev > >> 2.00/1.00 addr 1 > >> ohci1 at mainbus0: version 1.0 > >> rkiic0 at mainbus0 > >> iic0 at rkiic0 > >> fanpwr0 at iic0 addr 0x1c: TCS4525, 1.15 VDC > >> rkpmic0 at iic0 addr 0x20: RK809 > >> rkpwm0 at mainbus0rkclock_get_frequency(rkclock0, 13) > >> : no clock > >> "gpu" at mainbus0 not configured > >> "video-codec" at mainbus0 not configured > >> "iommu" at mainbus0 not configured > >> "rga" at mainbus0 not configured > >> "video-codec" at mainbus0 not configured > >> "iommu" at mainbus0 not configured > >> dwqe0 at mainbus0 gmac 1: rev 0x51, address 3e:68:a7:8e:7e:25 > >> rgephy0 at dwqe0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6 > >> "vop" at mainbus0 not configured > >> "iommu" at mainbus0 not configured > >> "hdmi" at mainbus0 not configured > >> dwpcie0 at mainbus0 > >> dwmmc0 at mainbus0: 50 MHz base clock > >> sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma > >> dwmshc0 at mainbus0 > >> dwmshc0: SDHC 4.20, 200 MHz base clock > >> sdmmc1 at dwmshc0: 8-bit, sd high-speed, mmc high-speed, dma > >> "i2s" at mainbus0 not configured > >> "i2s" at mainbus0 not configured > >> "dma-controller" at mainbus0 not configured > >> "dma-controller" at mainbus0 not configured > >> rkiic1 at mainbus0 > >> iic1 at rkiic1 > >> "watchdog" at mainbus0 not configured > >> com0 at mainbus0: dw16550, 64 byte fifo > >> rktemp0 at mainbus0 > >> "saradc" at mainbus0 not configured > >> ahci0 at mainbus0: AHCI 1.3 > >> scsibus0 at ahci0: 32 targets > >> dwpcie1 at mainbus0 > >> dwpcie2 at mainbus0 > >> dwqe1 at mainbus0 gmac 0: rev 0x51, address 3e:68:a7:8e:7e:24 > >> rgephy1 at dwqe1 phy 0: RTL8169S/8110S/8211 PHY, rev. 6 > >> rkrng0 at mainbus0: ver 2 > >> "hdmi-con" at mainbus0 not configured > >> gpiokeys0 at mainbus0: "reset" > >> gpioleds0 at mainbus0: no LEDs > >> "vcc12v-dcin" at mainbus0 not configured > >> "vcc3v3-sys" at mainbus0 not configured > >> "vcc5v0-sys" at mainbus0 not configured > >> "vcc5v0-usb" at mainbus0 not configured > >> "vcc5v0-usb-host" at mainbus0 not configured > >> "vcc3v3-pcie" at mainbus0 not configured > >> simpleaudio1 at mainbus0 > >> pwmfan0 at mainbus0 > >> simplefb0 at mainbus0: 3840x2160, 32bpp > >> wsdisplay0 at simplefb0 mux 1: console (std, vt100 emulation) > >> wsdisplay0: screen 1-5 added (std, vt100 emulation) > >> usb3 at ohci0: USB revision 1.0 > >> uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev > >> 1.00/1.00 addr 1 > >> usb4 at ohci1: USB revision 1.0 > >> uhub4 at usb4 configuration 1 interface 0 "Generic OHCI root hub" rev > >> 1.00/1.00 addr 1 > >> pci0 at dwpcie0 > >> ppb0 at pci0 dev 0 function 0 "Rockchip RK3566" rev 0x00 > >> pci1 at ppb0 bus 1 > >> "Intel WiFi Link 1030" rev 0x1a at pci1 dev 0 function 0 not configured > >> pci2 at dwpcie1 > >> ppb1 at pci2 dev 0 function 0 "Rockchip RK3566" rev 0x00 > >> pci3 at ppb1 bus 1 > >> rge0 at pci3 dev 0 function 0 "Realtek RTL8125" rev 0x05: msi, address > >> 00:00:00:00:00:00 > >> pci4 at dwpcie2 > >> ppb2 at pci4 dev 0 function 0 "Rockchip RK3566" rev 0x00 > >> pci5 at ppb2 bus 1 > >> rge1 at pci5 dev 0 function 0 "Realtek RTL8125" rev 0x05: msi, address > >> 00:00:00:00:00:00 > >> scsibus1 at sdmmc0: 2 targets, initiator 0 > >> sd0 at scsibus1 targ 1 lun 0: <SD/MMC, NCard, 0010> removable > >> sd0: 14910MB, 512 bytes/sector, 30535680 sectors > >> sdmmc1: can't enable card > >> sdhc_sdclk_frequency_select: command in progress > >> umass0 at uhub0 port 2 configuration 1 interface 0 "USB SanDisk 3.2Gen1" > >> rev 3.20/1.00 addr 2 > >> umass0: using SCSI over Bulk-Only > >> scsibus2 at umass0: 2 targets, initiator 0 > >> sd1 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable > >> serial.0781558381075e2a041c > >> sd1: 29340MB, 512 bytes/sector, 60088320 sectors > >> uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB > >> Keyboard" rev 1.10/64.02 addr 2 > >> uhidev0: iclass 3/1 > >> ukbd0 at uhidev0: 8 variable keys, 6 key codes > >> wskbd0 at ukbd0: console keyboard, using wsdisplay0 > >> uhidev1 at uhub4 port 1 configuration 1 interface 1 "Logitech USB > >> Keyboard" rev 1.10/64.02 addr 2 > >> uhidev1: iclass 3/0, 5 report ids > >> ucc0 at uhidev1 reportid 1: 2 usages, 3 keys, enum > >> wskbd1 at ucc0 mux 1 > >> wskbd1: connecting to wsdisplay0 > >> uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > >> ucc1 at uhidev1 reportid 3: 21 usages, 14 keys, enum > >> wskbd2 at ucc1 mux 1 > >> wskbd2: connecting to wsdisplay0 > >> uhid1 at uhidev1 reportid 5: input=0, output=0, feature=5 > >> vscsi0 at root > >> scsibus3 at vscsi0: 256 targets > >> softraid0 at root > >> scsibus4 at softraid0: 256 targets > >> root on sd1a (d9b3f31cd079d97e.a) swap on sd1b dump on sd1b > >> WARNING: bad clock chip time > >> WARNING: CHECK AND RESET THE DATE! > >> linkstar$ > >> linkstar$ > >> linkstar$ > >> linkstar$ uname -a > >> OpenBSD linkstar.extrowerk.com 7.4 GENERIC.MP#40 arm64 > >> linkstar$ doas pcidump -v > >> doas (szil...@linkstar.extrowerk.com) password: > >> Domain /dev/pci0: > >> 0:0:0: Rockchip RK3566 > >> 0x0000: Vendor ID: 1d87, Product ID: 3566 > >> 0x0004: Command: 0007, Status: 0010 > >> 0x0008: Class: 06 Bridge, Subclass: 04 PCI, > >> Interface: 00, Revision: 00 > >> 0x000c: BIST: 00, Header Type: 01, Latency Timer: 00, > >> Cache Line Size: 00 > >> 0x0010: BAR empty (00000000) > >> 0x0014: BAR empty (00000000) > >> 0x0018: Primary Bus: 0, Secondary Bus: 1, Subordinate Bus: 15, > >> Secondary Latency Timer: 00 > >> 0x001c: I/O Base: 01, I/O Limit: f1, Secondary Status: 0000 > >> 0x0020: Memory Base: f420, Memory Limit: f5f0 > >> 0x0024: Prefetch Memory Base: 4001, Prefetch Memory Limit: 7ff1 > >> 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 > >> 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 > >> 0x0030: I/O Base Upper 16 Bits: f410, I/O Limit Upper 16 Bits: f41f > >> 0x0038: Expansion ROM Base Address: 00000000 > >> 0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0000 > >> 0x0040: Capability 0x01: Power Management > >> State: D0 > >> 0x0050: Capability 0x05: Message Signalled Interrupts (MSI) > >> Enabled: no > >> 0x0070: Capability 0x10: PCI Express > >> Max Payload Size: 128 / 128 bytes > >> Max Read Request Size: 512 bytes > >> Link Speed: 2.5 / 8.0 GT/s > >> Link Width: x1 / x1 > >> 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > >> 0x0148: Enhanced Capability 0x19: Secondary PCIe Capability > >> 0x0160: Enhanced Capability 0x1e: L1 PM > >> 0x0170: Enhanced Capability 0x0b: Vendor-Specific > >> 0x00b0: Capability 0x11: Extended Message Signalled Interrupts > >> (MSI-X) > >> Enabled: no; table size 1 (BAR 0:0) > >> 1:0:0: Intel WiFi Link 1030 > >> 0x0000: Vendor ID: 8086, Product ID: 008a > >> 0x0004: Command: 0000, Status: 0010 > >> 0x0008: Class: 02 Network, Subclass: 80 Miscellaneous, > >> Interface: 00, Revision: 1a > >> 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > >> Cache Line Size: 00 > >> 0x0010: BAR mem 64bit addr: 0x0000000000000000/0x00002000 > >> 0x0018: BAR empty (00000000) > >> 0x001c: BAR empty (00000000) > >> 0x0020: BAR empty (00000000) > >> 0x0024: BAR empty (00000000) > >> 0x0028: Cardbus CIS: 00000000 > >> 0x002c: Subsystem Vendor ID: 8086 Product ID: 0000 > >> 0x0030: Expansion ROM Base Address: 00000000 > >> 0x0038: 00000000 > >> 0x003c: Interrupt Pin: 01 Line: 00 Min Gnt: 00 Max Lat: 00 > >> 0x00c8: Capability 0x01: Power Management > >> State: D0 > >> 0x00d0: Capability 0x05: Message Signalled Interrupts (MSI) > >> Enabled: no > >> 0x00e0: Capability 0x10: PCI Express > >> Max Payload Size: 128 / 128 bytes > >> Max Read Request Size: 128 bytes > >> Link Speed: 2.5 / 2.5 GT/s > >> Link Width: x1 / x1 > >> 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > >> 0x0140: Enhanced Capability 0x03: Device Serial Number > >> Serial Number: 000000ffff000000 > >> Domain /dev/pci1: > >> 0:0:0: Rockchip RK3566 > >> 0x0000: Vendor ID: 1d87, Product ID: 3566 > >> 0x0004: Command: 0007, Status: 0010 > >> 0x0008: Class: 06 Bridge, Subclass: 04 PCI, > >> Interface: 00, Revision: 00 > >> 0x000c: BIST: 00, Header Type: 01, Latency Timer: 00, > >> Cache Line Size: 00 > >> 0x0010: BAR empty (00000000) > >> 0x0014: BAR empty (00000000) > >> 0x0018: Primary Bus: 0, Secondary Bus: 1, Subordinate Bus: 15, > >> Secondary Latency Timer: 00 > >> 0x001c: I/O Base: 01, I/O Limit: f1, Secondary Status: 0000 > >> 0x0020: Memory Base: f220, Memory Limit: f3f0 > >> 0x0024: Prefetch Memory Base: 4001, Prefetch Memory Limit: 7ff1 > >> 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 > >> 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 > >> 0x0030: I/O Base Upper 16 Bits: f210, I/O Limit Upper 16 Bits: f21f > >> 0x0038: Expansion ROM Base Address: 00000000 > >> 0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0000 > >> 0x0040: Capability 0x01: Power Management > >> State: D0 > >> 0x0050: Capability 0x05: Message Signalled Interrupts (MSI) > >> Enabled: no > >> 0x0070: Capability 0x10: PCI Express > >> Max Payload Size: 128 / 256 bytes > >> Max Read Request Size: 512 bytes > >> Link Speed: 2.5 / 8.0 GT/s > >> Link Width: x1 / x1 > >> 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > >> 0x0148: Enhanced Capability 0x19: Secondary PCIe Capability > >> 0x0160: Enhanced Capability 0x1e: L1 PM > >> 0x0170: Enhanced Capability 0x0b: Vendor-Specific > >> 0x00b0: Capability 0x11: Extended Message Signalled Interrupts > >> (MSI-X) > >> Enabled: no; table size 128 (BAR 4:131072) > >> 1:0:0: Realtek RTL8125 > >> 0x0000: Vendor ID: 10ec, Product ID: 8125 > >> 0x0004: Command: 0006, Status: 0010 > >> 0x0008: Class: 02 Network, Subclass: 00 Ethernet, > >> Interface: 00, Revision: 05 > >> 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > >> Cache Line Size: 00 > >> 0x0010: BAR io addr: 0x00000000/0x0100 > >> 0x0014: BAR empty (00000000) > >> 0x0018: BAR mem 64bit addr: 0x00000000f2200000/0x00010000 > >> 0x0020: BAR mem 64bit addr: 0x0000000000000000/0x00004000 > >> 0x0028: Cardbus CIS: 00000000 > >> 0x002c: Subsystem Vendor ID: 10ec Product ID: 8125 > >> 0x0030: Expansion ROM Base Address: 00000000 > >> 0x0038: 00000000 > >> 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > >> 0x0040: Capability 0x01: Power Management > >> State: D0 > >> 0x0050: Capability 0x05: Message Signalled Interrupts (MSI) > >> Enabled: yes > >> 0x0070: Capability 0x10: PCI Express > >> Max Payload Size: 128 / 256 bytes > >> Max Read Request Size: 512 bytes > >> Link Speed: 2.5 / 5.0 GT/s > >> Link Width: x1 / x1 > >> 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > >> 0x0148: Enhanced Capability 0x02: Virtual Channel Capability > >> 0x0168: Enhanced Capability 0x03: Device Serial Number > >> Serial Number: 0000000000000000 > >> 0x0178: Enhanced Capability 0x17: TPH Requester > >> 0x0204: Enhanced Capability 0x18: Latency Tolerance Reporting > >> 0x020c: Enhanced Capability 0x1e: L1 PM > >> 0x021c: Enhanced Capability 0x0b: Vendor-Specific > >> 0x00b0: Capability 0x11: Extended Message Signalled Interrupts > >> (MSI-X) > >> Enabled: no; table size 32 (BAR 4:0) > >> 0x00d0: Capability 0x03: Vital Product Data (VPD) > >> 7f: [|vpd] > >> Domain /dev/pci2: > >> 0:0:0: Rockchip RK3566 > >> 0x0000: Vendor ID: 1d87, Product ID: 3566 > >> 0x0004: Command: 0007, Status: 0010 > >> 0x0008: Class: 06 Bridge, Subclass: 04 PCI, > >> Interface: 00, Revision: 00 > >> 0x000c: BIST: 00, Header Type: 01, Latency Timer: 00, > >> Cache Line Size: 00 > >> 0x0010: BAR mem 64bit addr: 0x0000000000000000/0x40000000 > >> 0x0018: Primary Bus: 0, Secondary Bus: 1, Subordinate Bus: 15, > >> Secondary Latency Timer: 00 > >> 0x001c: I/O Base: 01, I/O Limit: f1, Secondary Status: 0000 > >> 0x0020: Memory Base: f020, Memory Limit: f1f0 > >> 0x0024: Prefetch Memory Base: 4001, Prefetch Memory Limit: 7ff1 > >> 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 > >> 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 > >> 0x0030: I/O Base Upper 16 Bits: f010, I/O Limit Upper 16 Bits: f01f > >> 0x0038: Expansion ROM Base Address: 00000000 > >> 0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0000 > >> 0x0040: Capability 0x01: Power Management > >> State: D0 > >> 0x0050: Capability 0x05: Message Signalled Interrupts (MSI) > >> Enabled: no > >> 0x0070: Capability 0x10: PCI Express > >> Max Payload Size: 128 / 256 bytes > >> Max Read Request Size: 512 bytes > >> Link Speed: 5.0 / 8.0 GT/s > >> Link Width: x1 / x2 > >> 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > >> 0x0148: Enhanced Capability 0x19: Secondary PCIe Capability > >> 0x0160: Enhanced Capability 0x1e: L1 PM > >> 0x01a0: Enhanced Capability 0x0b: Vendor-Specific > >> 0x02a0: Enhanced Capability 0x0b: Vendor-Specific > >> 0x00b0: Capability 0x11: Extended Message Signalled Interrupts > >> (MSI-X) > >> Enabled: no; table size 128 (BAR 4:131072) > >> 1:0:0: Realtek RTL8125 > >> 0x0000: Vendor ID: 10ec, Product ID: 8125 > >> 0x0004: Command: 0006, Status: 0010 > >> 0x0008: Class: 02 Network, Subclass: 00 Ethernet, > >> Interface: 00, Revision: 05 > >> 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > >> Cache Line Size: 00 > >> 0x0010: BAR io addr: 0x00000000/0x0100 > >> 0x0014: BAR empty (00000000) > >> 0x0018: BAR mem 64bit addr: 0x00000000f0200000/0x00010000 > >> 0x0020: BAR mem 64bit addr: 0x0000000000000000/0x00004000 > >> 0x0028: Cardbus CIS: 00000000 > >> 0x002c: Subsystem Vendor ID: 10ec Product ID: 8125 > >> 0x0030: Expansion ROM Base Address: 00000000 > >> 0x0038: 00000000 > >> 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > >> 0x0040: Capability 0x01: Power Management > >> State: D0 > >> 0x0050: Capability 0x05: Message Signalled Interrupts (MSI) > >> Enabled: yes > >> 0x0070: Capability 0x10: PCI Express > >> Max Payload Size: 128 / 256 bytes > >> Max Read Request Size: 512 bytes > >> Link Speed: 5.0 / 5.0 GT/s > >> Link Width: x1 / x1 > >> 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > >> 0x0148: Enhanced Capability 0x02: Virtual Channel Capability > >> 0x0168: Enhanced Capability 0x03: Device Serial Number > >> Serial Number: 0000000000000000 > >> 0x0178: Enhanced Capability 0x17: TPH Requester > >> 0x0204: Enhanced Capability 0x18: Latency Tolerance Reporting > >> 0x020c: Enhanced Capability 0x1e: L1 PM > >> 0x021c: Enhanced Capability 0x0b: Vendor-Specific > >> 0x00b0: Capability 0x11: Extended Message Signalled Interrupts > >> (MSI-X) > >> Enabled: no; table size 32 (BAR 4:0) > >> 0x00d0: Capability 0x03: Vital Product Data (VPD) > >> 7f: [|vpd] > >> linkstar$ ifconfig > >> lo0: flags=2008049<UP,LOOPBACK,RUNNING,MULTICAST,LRO> mtu 32768 > >> index 6 priority 0 llprio 3 > >> groups: lo > >> inet6 ::1 prefixlen 128 > >> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 > >> inet 127.0.0.1 netmask 0xff000000 > >> dwqe0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu > >> 1500 > >> lladdr 3e:68:a7:8e:7e:25 > >> index 1 priority 0 llprio 3 > >> media: Ethernet autoselect (none) > >> status: no carrier > >> dwqe1: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu > >> 1500 > >> lladdr 3e:68:a7:8e:7e:24 > >> index 2 priority 0 llprio 3 > >> media: Ethernet autoselect (none) > >> status: no carrier > >> rge0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu > >> 1500 > >> lladdr 3e:68:a7:8e:7e:23 > >> index 3 priority 0 llprio 3 > >> media: Ethernet autoselect > >> status: no carrier > >> rge1: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu > >> 1500 > >> lladdr 3e:68:a7:8e:7e:22 > >> index 4 priority 0 llprio 3 > >> groups: egress > >> media: Ethernet autoselect (1000baseT full-duplex) > >> status: active > >> inet 192.168.1.181 netmask 0xffffff00 broadcast 192.168.1.255 > >> enc0: flags=0<> > >> index 5 priority 0 llprio 3 > >> groups: enc > >> status: active > >> pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33136 > >> index 7 priority 0 llprio 3 > >> groups: pflog > >> > >> --Z-- > >> > > -- > --Z-- >
