> Date: Mon, 15 Jan 2024 00:17:53 -0800 > From: Mike Larkin <mlar...@nested.page> > > On Mon, Jan 15, 2024 at 08:58:52AM +0100, Mizsei Zoltán wrote: > > Thanks, that did the trick, see new dmesg below. Would it possible to > > enable iwn* in the upstream sources? > > > > Best Regards, > > --Zoltan > > > > I think that should be doable. Mark, Patrick, any objections (and if no, do we > want iwm in there too?)
If we add iwn(4), we probably should add iwm(4) too. I think I had some worries that these Intel wireless cards were somehow closely tied to Intel chipsets and therefore adding them made only sense for amd64. But iwx(4) works and if iwn(4) works, I think we cane safely assume that iwm(4) should work as well. So no objection from me. > > linkstar$ uname -a > > OpenBSD linkstar.extrowerk.com 7.4 GENERIC.MP#1 arm64 > > linkstar$ dmesg > > OpenBSD 7.4 (GENERIC.MP) #1: Mon Jan 15 04:02:12 CET 2024 > > szil...@linkstar.extrowerk.com:/sys/arch/arm64/compile/GENERIC.MP > > real mem = 3959590912 (3776MB) > > avail mem = 3759493120 (3585MB) > > random: good seed from bootblocks > > mainbus0 at root: HINLINK OPC-H68K Board > > psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND > > efi0 at mainbus0: UEFI 2.7 > > efi0: EDK2 rev 0x10000 > > smbios0 at efi0: SMBIOS 3.3.0 > > smbios0: vendor EDK2 version "miq" date 12/16/2023 > > smbios0: Firefly Firefly ROC-RK3568-PC > > cpu0 at mainbus0 mpidr 0: ARM Cortex-A55 r2p0 > > cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > > cpu0: 512KB 64b/line 16-way L2 cache > > cpu0: > > DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS > > cpu1 at mainbus0 mpidr 100: ARM Cortex-A55 r2p0 > > cpu1: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > > cpu1: 512KB 64b/line 16-way L2 cache > > cpu1: > > DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS > > cpu2 at mainbus0 mpidr 200: ARM Cortex-A55 r2p0 > > cpu2: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > > cpu2: 512KB 64b/line 16-way L2 cache > > cpu2: > > DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS > > cpu3 at mainbus0 mpidr 300: ARM Cortex-A55 r2p0 > > cpu3: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > > cpu3: 512KB 64b/line 16-way L2 cache > > cpu3: > > DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS > > scmi0 at mainbus0: SCMI 2.0 > > apm0 at mainbus0 > > agintc0 at mainbus0 mbi shift 4:4 nirq 352 nredist 4 ipi: 0, 1, 2: > > "interrupt-controller" > > syscon0 at mainbus0: "syscon" > > rkiovd0 at syscon0 > > syscon1 at mainbus0: "syscon" > > syscon2 at mainbus0: "syscon" > > syscon3 at mainbus0: "syscon" > > syscon4 at mainbus0: "syscon" > > syscon5 at mainbus0: "syscon" > > syscon6 at mainbus0: "syscon" > > rkclock0 at mainbus0: PMUCRU > > rkclock1 at mainbus0: CRU > > syscon7 at mainbus0: "power-management" > > "power-controller" at syscon7 not configured > > syscon8 at mainbus0: "qos" > > syscon9 at mainbus0: "qos" > > syscon10 at mainbus0: "qos" > > syscon11 at mainbus0: "qos" > > syscon12 at mainbus0: "qos" > > syscon13 at mainbus0: "qos" > > syscon14 at mainbus0: "qos" > > syscon15 at mainbus0: "qos" > > syscon16 at mainbus0: "qos" > > syscon17 at mainbus0: "qos" > > syscon18 at mainbus0: "qos" > > syscon19 at mainbus0: "qos" > > syscon20 at mainbus0: "qos" > > syscon21 at mainbus0: "qos" > > syscon22 at mainbus0: "qos" > > syscon23 at mainbus0: "qos" > > syscon24 at mainbus0: "qos" > > syscon25 at mainbus0: "qos" > > syscon26 at mainbus0: "qos" > > syscon27 at mainbus0: "qos" > > syscon28 at mainbus0: "qos" > > syscon29 at mainbus0: "qos" > > syscon30 at mainbus0: "qos" > > syscon31 at mainbus0: "qos" > > rkcomphy0 at mainbus0 > > rkcomphy1 at mainbus0 > > rkusbphy0 at mainbus0: phy 0 > > rkusbphy1 at mainbus0: phy 1 > > rkpinctrl0 at mainbus0: "pinctrl" > > rkgpio0 at rkpinctrl0 > > rkgpio1 at rkpinctrl0 > > rkgpio2 at rkpinctrl0 > > rkgpio3 at rkpinctrl0 > > rkgpio4 at rkpinctrl0 > > syscon32 at mainbus0: "syscon" > > syscon33 at mainbus0: "qos" > > syscon34 at mainbus0: "qos" > > syscon35 at mainbus0: "qos" > > syscon36 at mainbus0: "syscon" > > rkpciephy0 at mainbus0 > > rkcomphy2 at mainbus0 > > "fit-images" at mainbus0 not configured > > "opp-table-0" at mainbus0 not configured > > "display-subsystem" at mainbus0 not configured > > "firmware" at mainbus0 not configured > > "opp-table-1" at mainbus0 not configured > > simpleaudio0 at mainbus0 > > "pmu" at mainbus0 not configured > > agtimer0 at mainbus0: 24000 kHz > > "xin24m" at mainbus0 not configured > > "xin32k" at mainbus0 not configured > > "sram" at mainbus0 not configured > > xhci0 at mainbus0, xHCI 1.10 > > usb0 at xhci0: USB revision 3.0 > > uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev > > 3.00/1.00 addr 1 > > ehci0 at mainbus0 > > usb1 at ehci0: USB revision 2.0 > > uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev > > 2.00/1.00 addr 1 > > ohci0 at mainbus0: version 1.0 > > ehci1 at mainbus0 > > usb2 at ehci1: USB revision 2.0 > > uhub2 at usb2 configuration 1 interface 0 "Generic EHCI root hub" rev > > 2.00/1.00 addr 1 > > ohci1 at mainbus0: version 1.0 > > rkiic0 at mainbus0 > > iic0 at rkiic0 > > fanpwr0 at iic0 addr 0x1c: TCS4525, 1.15 VDC > > rkpmic0 at iic0 addr 0x20: RK809 > > rkpwm0 at mainbus0rkclock_get_frequency(rkclock0, 13) > > : no clock > > "gpu" at mainbus0 not configured > > "video-codec" at mainbus0 not configured > > "iommu" at mainbus0 not configured > > "rga" at mainbus0 not configured > > "video-codec" at mainbus0 not configured > > "iommu" at mainbus0 not configured > > dwqe0 at mainbus0 gmac 1: rev 0x00, address 3e:68:a7:8e:7e:25 > > rgephy0 at dwqe0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6 > > "vop" at mainbus0 not configured > > "iommu" at mainbus0 not configured > > "hdmi" at mainbus0 not configured > > dwpcie0 at mainbus0 > > dwmmc0 at mainbus0: 50 MHz base clock > > sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma > > dwmshc0 at mainbus0 > > dwmshc0: SDHC 4.20, 200 MHz base clock > > sdmmc1 at dwmshc0: 8-bit, sd high-speed, mmc high-speed, dma > > "i2s" at mainbus0 not configured > > "i2s" at mainbus0 not configured > > "dma-controller" at mainbus0 not configured > > "dma-controller" at mainbus0 not configured > > rkiic1 at mainbus0 > > iic1 at rkiic1 > > "watchdog" at mainbus0 not configured > > com0 at mainbus0: dw16550, 64 byte fifo > > rktemp0 at mainbus0 > > "saradc" at mainbus0 not configured > > ahci0 at mainbus0: AHCI 1.3 > > scsibus0 at ahci0: 32 targets > > dwpcie1 at mainbus0 > > dwpcie2 at mainbus0 > > dwqe1 at mainbus0 gmac 0: rev 0x00, address 3e:68:a7:8e:7e:24 > > rgephy1 at dwqe1 phy 0: RTL8169S/8110S/8211 PHY, rev. 6 > > rkrng0 at mainbus0: ver 2 > > "hdmi-con" at mainbus0 not configured > > gpiokeys0 at mainbus0: "reset" > > gpioleds0 at mainbus0: no LEDs > > "vcc12v-dcin" at mainbus0 not configured > > "vcc3v3-sys" at mainbus0 not configured > > "vcc5v0-sys" at mainbus0 not configured > > "vcc5v0-usb" at mainbus0 not configured > > "vcc5v0-usb-host" at mainbus0 not configured > > "vcc3v3-pcie" at mainbus0 not configured > > simpleaudio1 at mainbus0 > > pwmfan0 at mainbus0 > > simplefb0 at mainbus0: 3840x2160, 32bpp > > wsdisplay0 at simplefb0 mux 1: console (std, vt100 emulation) > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > usb3 at ohci0: USB revision 1.0 > > uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev > > 1.00/1.00 addr 1 > > usb4 at ohci1: USB revision 1.0 > > uhub4 at usb4 configuration 1 interface 0 "Generic OHCI root hub" rev > > 1.00/1.00 addr 1 > > pci0 at dwpcie0 > > ppb0 at pci0 dev 0 function 0 "Rockchip RK3566" rev 0x00 > > pci1 at ppb0 bus 1 > > iwn0 at pci1 dev 0 function 0 "Intel WiFi Link 1030" rev 0x1a: msi, MIMO > > 2T2R, AGN, address 08:d4:0c:13:a0:65 > > pci2 at dwpcie1 > > ppb1 at pci2 dev 0 function 0 "Rockchip RK3566" rev 0x00 > > pci3 at ppb1 bus 1 > > rge0 at pci3 dev 0 function 0 "Realtek RTL8125" rev 0x05: msi, address > > 00:00:00:00:00:00 > > pci4 at dwpcie2 > > ppb2 at pci4 dev 0 function 0 "Rockchip RK3566" rev 0x00 > > pci5 at ppb2 bus 1 > > rge1 at pci5 dev 0 function 0 "Realtek RTL8125" rev 0x05: msi, address > > 00:00:00:00:00:00 > > scsibus1 at sdmmc0: 2 targets, initiator 0 > > sd0 at scsibus1 targ 1 lun 0: <SD/MMC, NCard, 0010> removable > > sd0: 14910MB, 512 bytes/sector, 30535680 sectors > > sdmmc1: can't enable card > > sdhc_sdclk_frequency_select: command in progress > > umass0 at uhub0 port 2 configuration 1 interface 0 "USB SanDisk 3.2Gen1" > > rev 3.20/1.00 addr 2 > > umass0: using SCSI over Bulk-Only > > scsibus2 at umass0: 2 targets, initiator 0 > > sd1 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable > > serial.0781558381075e2a041c > > sd1: 29340MB, 512 bytes/sector, 60088320 sectors > > uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB Keyboard" > > rev 1.10/64.02 addr 2 > > uhidev0: iclass 3/1 > > ukbd0 at uhidev0: 8 variable keys, 6 key codes > > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > > uhidev1 at uhub4 port 1 configuration 1 interface 1 "Logitech USB Keyboard" > > rev 1.10/64.02 addr 2 > > uhidev1: iclass 3/0, 5 report ids > > ucc0 at uhidev1 reportid 1: 2 usages, 3 keys, enum > > wskbd1 at ucc0 mux 1 > > wskbd1: connecting to wsdisplay0 > > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > > ucc1 at uhidev1 reportid 3: 21 usages, 14 keys, enum > > wskbd2 at ucc1 mux 1 > > wskbd2: connecting to wsdisplay0 > > uhid1 at uhidev1 reportid 5: input=0, output=0, feature=5 > > vscsi0 at root > > scsibus3 at vscsi0: 256 targets > > softraid0 at root > > scsibus4 at softraid0: 256 targets > > root on sd1a (d9b3f31cd079d97e.a) swap on sd1b dump on sd1b > > WARNING: bad clock chip time > > WARNING: CHECK AND RESET THE DATE! > > linkstar$ ifconfig > > lo0: flags=2008049<UP,LOOPBACK,RUNNING,MULTICAST,LRO> mtu 32768 > > index 7 priority 0 llprio 3 > > groups: lo > > inet6 ::1 prefixlen 128 > > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7 > > inet 127.0.0.1 netmask 0xff000000 > > dwqe0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu > > 1500 > > lladdr 3e:68:a7:8e:7e:25 > > index 1 priority 0 llprio 3 > > media: Ethernet autoselect (none) > > status: no carrier > > dwqe1: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu > > 1500 > > lladdr 3e:68:a7:8e:7e:24 > > index 2 priority 0 llprio 3 > > media: Ethernet autoselect (none) > > status: no carrier > > iwn0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu > > 1500 > > lladdr 08:d4:0c:13:a0:65 > > index 3 priority 4 llprio 3 > > groups: wlan egress > > media: IEEE802.11 autoselect (HT-MCS0 mode 11n) > > status: active > > ieee80211: join Linksys chan 1 bssid 50:eb:f6:83:09:cc -88dBm > > wpakey wpaprotos wpa2 wpaakms psk wpaciphers ccmp wpagroupcipher ccmp > > inet 192.168.1.226 netmask 0xffffff00 broadcast 192.168.1.255 > > rge0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu > > 1500 > > lladdr 3e:68:a7:8e:7e:23 > > index 4 priority 0 llprio 3 > > media: Ethernet autoselect > > status: no carrier > > rge1: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu > > 1500 > > lladdr 3e:68:a7:8e:7e:22 > > index 5 priority 0 llprio 3 > > groups: egress > > media: Ethernet autoselect (1000baseT full-duplex) > > status: active > > inet 192.168.1.181 netmask 0xffffff00 broadcast 192.168.1.255 > > enc0: flags=0<> > > index 6 priority 0 llprio 3 > > groups: enc > > status: active > > pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33136 > > index 8 priority 0 llprio 3 > > groups: pflog > > linkstar$ > > > > Mike Larkin írta 2024. jan.. 14, V-n 21:28 órakor: > > > On Sun, Jan 14, 2024 at 09:13:54PM +0100, Mizsei Zoltán wrote: > > >> Hi, > > >> > > >> I have messing with OpenBSD current on my LinkStar H68K ARM box, based > > >> on the Rockchip RK3568 SOC. Originally it had an unsupported Mediatek > > >> wlan card, which i have replaced it with an intel one i had lying around. > > >> While OBSD recognizes the installed card, it categorically states it is > > >> not-configured, while it supposed to be supported by the iwn driver. > > >> > > >> Sadly i did not made any photo about the card i have installed, and the > > >> device is tricky to disassemble, but AFAIR the installed card is 0x8086, > > >> 0x088f, "Intel Centrino Advanced-N 6235. What could cause a device > > >> mis-recognition? > > >> > > >> Any idea what's going on here? > > >> > > >> Best Regards, > > >> --Zoltan > > >> > > > > > > iwn* at pci? is not in arm64 GENERIC. > > > > > > You might try adding that line to /sys/arch/arm64/conf/GENERIC (look for > > > iwx > > > just toss it after that). It might work. > > > > > > -ml > > > > > >> OpenBSD 7.4-current (GENERIC.MP) #40: Wed Jan 10 02:01:40 MST 2024 > > >> dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP > > >> real mem = 3959590912 (3776MB) > > >> avail mem = 3755196416 (3581MB) > > >> random: good seed from bootblocks > > >> mainbus0 at root: HINLINK OPC-H68K Board > > >> psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND > > >> efi0 at mainbus0: UEFI 2.7 > > >> efi0: EDK2 rev 0x10000 > > >> smbios0 at efi0: SMBIOS 3.3.0 > > >> smbios0: vendor EDK2 version "miq" date 12/16/2023 > > >> smbios0: Firefly Firefly ROC-RK3568-PC > > >> cpu0 at mainbus0 mpidr 0: ARM Cortex-A55 r2p0 > > >> cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > > >> cpu0: 512KB 64b/line 16-way L2 cache > > >> cpu0: > > >> DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS > > >> cpu1 at mainbus0 mpidr 100: ARM Cortex-A55 r2p0 > > >> cpu1: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > > >> cpu1: 512KB 64b/line 16-way L2 cache > > >> cpu1: > > >> DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS > > >> cpu2 at mainbus0 mpidr 200: ARM Cortex-A55 r2p0 > > >> cpu2: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > > >> cpu2: 512KB 64b/line 16-way L2 cache > > >> cpu2: > > >> DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS > > >> cpu3 at mainbus0 mpidr 300: ARM Cortex-A55 r2p0 > > >> cpu3: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > > >> cpu3: 512KB 64b/line 16-way L2 cache > > >> cpu3: > > >> DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS > > >> scmi0 at mainbus0: SCMI 2.0 > > >> apm0 at mainbus0 > > >> agintc0 at mainbus0 mbi shift 4:4 nirq 352 nredist 4 ipi: 0, 1, 2: > > >> "interrupt-controller" > > >> syscon0 at mainbus0: "syscon" > > >> rkiovd0 at syscon0 > > >> syscon1 at mainbus0: "syscon" > > >> syscon2 at mainbus0: "syscon" > > >> syscon3 at mainbus0: "syscon" > > >> syscon4 at mainbus0: "syscon" > > >> syscon5 at mainbus0: "syscon" > > >> syscon6 at mainbus0: "syscon" > > >> rkclock0 at mainbus0: PMUCRU > > >> rkclock1 at mainbus0: CRU > > >> syscon7 at mainbus0: "power-management" > > >> "power-controller" at syscon7 not configured > > >> syscon8 at mainbus0: "qos" > > >> syscon9 at mainbus0: "qos" > > >> syscon10 at mainbus0: "qos" > > >> syscon11 at mainbus0: "qos" > > >> syscon12 at mainbus0: "qos" > > >> syscon13 at mainbus0: "qos" > > >> syscon14 at mainbus0: "qos" > > >> syscon15 at mainbus0: "qos" > > >> syscon16 at mainbus0: "qos" > > >> syscon17 at mainbus0: "qos" > > >> syscon18 at mainbus0: "qos" > > >> syscon19 at mainbus0: "qos" > > >> syscon20 at mainbus0: "qos" > > >> syscon21 at mainbus0: "qos" > > >> syscon22 at mainbus0: "qos" > > >> syscon23 at mainbus0: "qos" > > >> syscon24 at mainbus0: "qos" > > >> syscon25 at mainbus0: "qos" > > >> syscon26 at mainbus0: "qos" > > >> syscon27 at mainbus0: "qos" > > >> syscon28 at mainbus0: "qos" > > >> syscon29 at mainbus0: "qos" > > >> syscon30 at mainbus0: "qos" > > >> syscon31 at mainbus0: "qos" > > >> rkcomphy0 at mainbus0 > > >> rkcomphy1 at mainbus0 > > >> rkusbphy0 at mainbus0: phy 0 > > >> rkusbphy1 at mainbus0: phy 1 > > >> rkpinctrl0 at mainbus0: "pinctrl" > > >> rkgpio0 at rkpinctrl0 > > >> rkgpio1 at rkpinctrl0 > > >> rkgpio2 at rkpinctrl0 > > >> rkgpio3 at rkpinctrl0 > > >> rkgpio4 at rkpinctrl0 > > >> syscon32 at mainbus0: "syscon" > > >> syscon33 at mainbus0: "qos" > > >> syscon34 at mainbus0: "qos" > > >> syscon35 at mainbus0: "qos" > > >> syscon36 at mainbus0: "syscon" > > >> rkpciephy0 at mainbus0 > > >> rkcomphy2 at mainbus0 > > >> "fit-images" at mainbus0 not configured > > >> "opp-table-0" at mainbus0 not configured > > >> "display-subsystem" at mainbus0 not configured > > >> "firmware" at mainbus0 not configured > > >> "opp-table-1" at mainbus0 not configured > > >> simpleaudio0 at mainbus0 > > >> "pmu" at mainbus0 not configured > > >> agtimer0 at mainbus0: 24000 kHz > > >> "xin24m" at mainbus0 not configured > > >> "xin32k" at mainbus0 not configured > > >> "sram" at mainbus0 not configured > > >> xhci0 at mainbus0, xHCI 1.10 > > >> usb0 at xhci0: USB revision 3.0 > > >> uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev > > >> 3.00/1.00 addr 1 > > >> ehci0 at mainbus0 > > >> usb1 at ehci0: USB revision 2.0 > > >> uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev > > >> 2.00/1.00 addr 1 > > >> ohci0 at mainbus0: version 1.0 > > >> ehci1 at mainbus0 > > >> usb2 at ehci1: USB revision 2.0 > > >> uhub2 at usb2 configuration 1 interface 0 "Generic EHCI root hub" rev > > >> 2.00/1.00 addr 1 > > >> ohci1 at mainbus0: version 1.0 > > >> rkiic0 at mainbus0 > > >> iic0 at rkiic0 > > >> fanpwr0 at iic0 addr 0x1c: TCS4525, 1.15 VDC > > >> rkpmic0 at iic0 addr 0x20: RK809 > > >> rkpwm0 at mainbus0rkclock_get_frequency(rkclock0, 13) > > >> : no clock > > >> "gpu" at mainbus0 not configured > > >> "video-codec" at mainbus0 not configured > > >> "iommu" at mainbus0 not configured > > >> "rga" at mainbus0 not configured > > >> "video-codec" at mainbus0 not configured > > >> "iommu" at mainbus0 not configured > > >> dwqe0 at mainbus0 gmac 1: rev 0x51, address 3e:68:a7:8e:7e:25 > > >> rgephy0 at dwqe0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6 > > >> "vop" at mainbus0 not configured > > >> "iommu" at mainbus0 not configured > > >> "hdmi" at mainbus0 not configured > > >> dwpcie0 at mainbus0 > > >> dwmmc0 at mainbus0: 50 MHz base clock > > >> sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma > > >> dwmshc0 at mainbus0 > > >> dwmshc0: SDHC 4.20, 200 MHz base clock > > >> sdmmc1 at dwmshc0: 8-bit, sd high-speed, mmc high-speed, dma > > >> "i2s" at mainbus0 not configured > > >> "i2s" at mainbus0 not configured > > >> "dma-controller" at mainbus0 not configured > > >> "dma-controller" at mainbus0 not configured > > >> rkiic1 at mainbus0 > > >> iic1 at rkiic1 > > >> "watchdog" at mainbus0 not configured > > >> com0 at mainbus0: dw16550, 64 byte fifo > > >> rktemp0 at mainbus0 > > >> "saradc" at mainbus0 not configured > > >> ahci0 at mainbus0: AHCI 1.3 > > >> scsibus0 at ahci0: 32 targets > > >> dwpcie1 at mainbus0 > > >> dwpcie2 at mainbus0 > > >> dwqe1 at mainbus0 gmac 0: rev 0x51, address 3e:68:a7:8e:7e:24 > > >> rgephy1 at dwqe1 phy 0: RTL8169S/8110S/8211 PHY, rev. 6 > > >> rkrng0 at mainbus0: ver 2 > > >> "hdmi-con" at mainbus0 not configured > > >> gpiokeys0 at mainbus0: "reset" > > >> gpioleds0 at mainbus0: no LEDs > > >> "vcc12v-dcin" at mainbus0 not configured > > >> "vcc3v3-sys" at mainbus0 not configured > > >> "vcc5v0-sys" at mainbus0 not configured > > >> "vcc5v0-usb" at mainbus0 not configured > > >> "vcc5v0-usb-host" at mainbus0 not configured > > >> "vcc3v3-pcie" at mainbus0 not configured > > >> simpleaudio1 at mainbus0 > > >> pwmfan0 at mainbus0 > > >> simplefb0 at mainbus0: 3840x2160, 32bpp > > >> wsdisplay0 at simplefb0 mux 1: console (std, vt100 emulation) > > >> wsdisplay0: screen 1-5 added (std, vt100 emulation) > > >> usb3 at ohci0: USB revision 1.0 > > >> uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev > > >> 1.00/1.00 addr 1 > > >> usb4 at ohci1: USB revision 1.0 > > >> uhub4 at usb4 configuration 1 interface 0 "Generic OHCI root hub" rev > > >> 1.00/1.00 addr 1 > > >> pci0 at dwpcie0 > > >> ppb0 at pci0 dev 0 function 0 "Rockchip RK3566" rev 0x00 > > >> pci1 at ppb0 bus 1 > > >> "Intel WiFi Link 1030" rev 0x1a at pci1 dev 0 function 0 not configured > > >> pci2 at dwpcie1 > > >> ppb1 at pci2 dev 0 function 0 "Rockchip RK3566" rev 0x00 > > >> pci3 at ppb1 bus 1 > > >> rge0 at pci3 dev 0 function 0 "Realtek RTL8125" rev 0x05: msi, address > > >> 00:00:00:00:00:00 > > >> pci4 at dwpcie2 > > >> ppb2 at pci4 dev 0 function 0 "Rockchip RK3566" rev 0x00 > > >> pci5 at ppb2 bus 1 > > >> rge1 at pci5 dev 0 function 0 "Realtek RTL8125" rev 0x05: msi, address > > >> 00:00:00:00:00:00 > > >> scsibus1 at sdmmc0: 2 targets, initiator 0 > > >> sd0 at scsibus1 targ 1 lun 0: <SD/MMC, NCard, 0010> removable > > >> sd0: 14910MB, 512 bytes/sector, 30535680 sectors > > >> sdmmc1: can't enable card > > >> sdhc_sdclk_frequency_select: command in progress > > >> umass0 at uhub0 port 2 configuration 1 interface 0 "USB SanDisk 3.2Gen1" > > >> rev 3.20/1.00 addr 2 > > >> umass0: using SCSI over Bulk-Only > > >> scsibus2 at umass0: 2 targets, initiator 0 > > >> sd1 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable > > >> serial.0781558381075e2a041c > > >> sd1: 29340MB, 512 bytes/sector, 60088320 sectors > > >> uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB > > >> Keyboard" rev 1.10/64.02 addr 2 > > >> uhidev0: iclass 3/1 > > >> ukbd0 at uhidev0: 8 variable keys, 6 key codes > > >> wskbd0 at ukbd0: console keyboard, using wsdisplay0 > > >> uhidev1 at uhub4 port 1 configuration 1 interface 1 "Logitech USB > > >> Keyboard" rev 1.10/64.02 addr 2 > > >> uhidev1: iclass 3/0, 5 report ids > > >> ucc0 at uhidev1 reportid 1: 2 usages, 3 keys, enum > > >> wskbd1 at ucc0 mux 1 > > >> wskbd1: connecting to wsdisplay0 > > >> uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > > >> ucc1 at uhidev1 reportid 3: 21 usages, 14 keys, enum > > >> wskbd2 at ucc1 mux 1 > > >> wskbd2: connecting to wsdisplay0 > > >> uhid1 at uhidev1 reportid 5: input=0, output=0, feature=5 > > >> vscsi0 at root > > >> scsibus3 at vscsi0: 256 targets > > >> softraid0 at root > > >> scsibus4 at softraid0: 256 targets > > >> root on sd1a (d9b3f31cd079d97e.a) swap on sd1b dump on sd1b > > >> WARNING: bad clock chip time > > >> WARNING: CHECK AND RESET THE DATE! > > >> linkstar$ > > >> linkstar$ > > >> linkstar$ > > >> linkstar$ uname -a > > >> OpenBSD linkstar.extrowerk.com 7.4 GENERIC.MP#40 arm64 > > >> linkstar$ doas pcidump -v > > >> doas (szil...@linkstar.extrowerk.com) password: > > >> Domain /dev/pci0: > > >> 0:0:0: Rockchip RK3566 > > >> 0x0000: Vendor ID: 1d87, Product ID: 3566 > > >> 0x0004: Command: 0007, Status: 0010 > > >> 0x0008: Class: 06 Bridge, Subclass: 04 PCI, > > >> Interface: 00, Revision: 00 > > >> 0x000c: BIST: 00, Header Type: 01, Latency Timer: 00, > > >> Cache Line Size: 00 > > >> 0x0010: BAR empty (00000000) > > >> 0x0014: BAR empty (00000000) > > >> 0x0018: Primary Bus: 0, Secondary Bus: 1, Subordinate Bus: 15, > > >> Secondary Latency Timer: 00 > > >> 0x001c: I/O Base: 01, I/O Limit: f1, Secondary Status: 0000 > > >> 0x0020: Memory Base: f420, Memory Limit: f5f0 > > >> 0x0024: Prefetch Memory Base: 4001, Prefetch Memory Limit: 7ff1 > > >> 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 > > >> 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 > > >> 0x0030: I/O Base Upper 16 Bits: f410, I/O Limit Upper 16 Bits: > > >> f41f > > >> 0x0038: Expansion ROM Base Address: 00000000 > > >> 0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0000 > > >> 0x0040: Capability 0x01: Power Management > > >> State: D0 > > >> 0x0050: Capability 0x05: Message Signalled Interrupts (MSI) > > >> Enabled: no > > >> 0x0070: Capability 0x10: PCI Express > > >> Max Payload Size: 128 / 128 bytes > > >> Max Read Request Size: 512 bytes > > >> Link Speed: 2.5 / 8.0 GT/s > > >> Link Width: x1 / x1 > > >> 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > > >> 0x0148: Enhanced Capability 0x19: Secondary PCIe Capability > > >> 0x0160: Enhanced Capability 0x1e: L1 PM > > >> 0x0170: Enhanced Capability 0x0b: Vendor-Specific > > >> 0x00b0: Capability 0x11: Extended Message Signalled Interrupts > > >> (MSI-X) > > >> Enabled: no; table size 1 (BAR 0:0) > > >> 1:0:0: Intel WiFi Link 1030 > > >> 0x0000: Vendor ID: 8086, Product ID: 008a > > >> 0x0004: Command: 0000, Status: 0010 > > >> 0x0008: Class: 02 Network, Subclass: 80 Miscellaneous, > > >> Interface: 00, Revision: 1a > > >> 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > > >> Cache Line Size: 00 > > >> 0x0010: BAR mem 64bit addr: 0x0000000000000000/0x00002000 > > >> 0x0018: BAR empty (00000000) > > >> 0x001c: BAR empty (00000000) > > >> 0x0020: BAR empty (00000000) > > >> 0x0024: BAR empty (00000000) > > >> 0x0028: Cardbus CIS: 00000000 > > >> 0x002c: Subsystem Vendor ID: 8086 Product ID: 0000 > > >> 0x0030: Expansion ROM Base Address: 00000000 > > >> 0x0038: 00000000 > > >> 0x003c: Interrupt Pin: 01 Line: 00 Min Gnt: 00 Max Lat: 00 > > >> 0x00c8: Capability 0x01: Power Management > > >> State: D0 > > >> 0x00d0: Capability 0x05: Message Signalled Interrupts (MSI) > > >> Enabled: no > > >> 0x00e0: Capability 0x10: PCI Express > > >> Max Payload Size: 128 / 128 bytes > > >> Max Read Request Size: 128 bytes > > >> Link Speed: 2.5 / 2.5 GT/s > > >> Link Width: x1 / x1 > > >> 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > > >> 0x0140: Enhanced Capability 0x03: Device Serial Number > > >> Serial Number: 000000ffff000000 > > >> Domain /dev/pci1: > > >> 0:0:0: Rockchip RK3566 > > >> 0x0000: Vendor ID: 1d87, Product ID: 3566 > > >> 0x0004: Command: 0007, Status: 0010 > > >> 0x0008: Class: 06 Bridge, Subclass: 04 PCI, > > >> Interface: 00, Revision: 00 > > >> 0x000c: BIST: 00, Header Type: 01, Latency Timer: 00, > > >> Cache Line Size: 00 > > >> 0x0010: BAR empty (00000000) > > >> 0x0014: BAR empty (00000000) > > >> 0x0018: Primary Bus: 0, Secondary Bus: 1, Subordinate Bus: 15, > > >> Secondary Latency Timer: 00 > > >> 0x001c: I/O Base: 01, I/O Limit: f1, Secondary Status: 0000 > > >> 0x0020: Memory Base: f220, Memory Limit: f3f0 > > >> 0x0024: Prefetch Memory Base: 4001, Prefetch Memory Limit: 7ff1 > > >> 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 > > >> 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 > > >> 0x0030: I/O Base Upper 16 Bits: f210, I/O Limit Upper 16 Bits: > > >> f21f > > >> 0x0038: Expansion ROM Base Address: 00000000 > > >> 0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0000 > > >> 0x0040: Capability 0x01: Power Management > > >> State: D0 > > >> 0x0050: Capability 0x05: Message Signalled Interrupts (MSI) > > >> Enabled: no > > >> 0x0070: Capability 0x10: PCI Express > > >> Max Payload Size: 128 / 256 bytes > > >> Max Read Request Size: 512 bytes > > >> Link Speed: 2.5 / 8.0 GT/s > > >> Link Width: x1 / x1 > > >> 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > > >> 0x0148: Enhanced Capability 0x19: Secondary PCIe Capability > > >> 0x0160: Enhanced Capability 0x1e: L1 PM > > >> 0x0170: Enhanced Capability 0x0b: Vendor-Specific > > >> 0x00b0: Capability 0x11: Extended Message Signalled Interrupts > > >> (MSI-X) > > >> Enabled: no; table size 128 (BAR 4:131072) > > >> 1:0:0: Realtek RTL8125 > > >> 0x0000: Vendor ID: 10ec, Product ID: 8125 > > >> 0x0004: Command: 0006, Status: 0010 > > >> 0x0008: Class: 02 Network, Subclass: 00 Ethernet, > > >> Interface: 00, Revision: 05 > > >> 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > > >> Cache Line Size: 00 > > >> 0x0010: BAR io addr: 0x00000000/0x0100 > > >> 0x0014: BAR empty (00000000) > > >> 0x0018: BAR mem 64bit addr: 0x00000000f2200000/0x00010000 > > >> 0x0020: BAR mem 64bit addr: 0x0000000000000000/0x00004000 > > >> 0x0028: Cardbus CIS: 00000000 > > >> 0x002c: Subsystem Vendor ID: 10ec Product ID: 8125 > > >> 0x0030: Expansion ROM Base Address: 00000000 > > >> 0x0038: 00000000 > > >> 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > > >> 0x0040: Capability 0x01: Power Management > > >> State: D0 > > >> 0x0050: Capability 0x05: Message Signalled Interrupts (MSI) > > >> Enabled: yes > > >> 0x0070: Capability 0x10: PCI Express > > >> Max Payload Size: 128 / 256 bytes > > >> Max Read Request Size: 512 bytes > > >> Link Speed: 2.5 / 5.0 GT/s > > >> Link Width: x1 / x1 > > >> 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > > >> 0x0148: Enhanced Capability 0x02: Virtual Channel Capability > > >> 0x0168: Enhanced Capability 0x03: Device Serial Number > > >> Serial Number: 0000000000000000 > > >> 0x0178: Enhanced Capability 0x17: TPH Requester > > >> 0x0204: Enhanced Capability 0x18: Latency Tolerance Reporting > > >> 0x020c: Enhanced Capability 0x1e: L1 PM > > >> 0x021c: Enhanced Capability 0x0b: Vendor-Specific > > >> 0x00b0: Capability 0x11: Extended Message Signalled Interrupts > > >> (MSI-X) > > >> Enabled: no; table size 32 (BAR 4:0) > > >> 0x00d0: Capability 0x03: Vital Product Data (VPD) > > >> 7f: [|vpd] > > >> Domain /dev/pci2: > > >> 0:0:0: Rockchip RK3566 > > >> 0x0000: Vendor ID: 1d87, Product ID: 3566 > > >> 0x0004: Command: 0007, Status: 0010 > > >> 0x0008: Class: 06 Bridge, Subclass: 04 PCI, > > >> Interface: 00, Revision: 00 > > >> 0x000c: BIST: 00, Header Type: 01, Latency Timer: 00, > > >> Cache Line Size: 00 > > >> 0x0010: BAR mem 64bit addr: 0x0000000000000000/0x40000000 > > >> 0x0018: Primary Bus: 0, Secondary Bus: 1, Subordinate Bus: 15, > > >> Secondary Latency Timer: 00 > > >> 0x001c: I/O Base: 01, I/O Limit: f1, Secondary Status: 0000 > > >> 0x0020: Memory Base: f020, Memory Limit: f1f0 > > >> 0x0024: Prefetch Memory Base: 4001, Prefetch Memory Limit: 7ff1 > > >> 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 > > >> 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 > > >> 0x0030: I/O Base Upper 16 Bits: f010, I/O Limit Upper 16 Bits: > > >> f01f > > >> 0x0038: Expansion ROM Base Address: 00000000 > > >> 0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0000 > > >> 0x0040: Capability 0x01: Power Management > > >> State: D0 > > >> 0x0050: Capability 0x05: Message Signalled Interrupts (MSI) > > >> Enabled: no > > >> 0x0070: Capability 0x10: PCI Express > > >> Max Payload Size: 128 / 256 bytes > > >> Max Read Request Size: 512 bytes > > >> Link Speed: 5.0 / 8.0 GT/s > > >> Link Width: x1 / x2 > > >> 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > > >> 0x0148: Enhanced Capability 0x19: Secondary PCIe Capability > > >> 0x0160: Enhanced Capability 0x1e: L1 PM > > >> 0x01a0: Enhanced Capability 0x0b: Vendor-Specific > > >> 0x02a0: Enhanced Capability 0x0b: Vendor-Specific > > >> 0x00b0: Capability 0x11: Extended Message Signalled Interrupts > > >> (MSI-X) > > >> Enabled: no; table size 128 (BAR 4:131072) > > >> 1:0:0: Realtek RTL8125 > > >> 0x0000: Vendor ID: 10ec, Product ID: 8125 > > >> 0x0004: Command: 0006, Status: 0010 > > >> 0x0008: Class: 02 Network, Subclass: 00 Ethernet, > > >> Interface: 00, Revision: 05 > > >> 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > > >> Cache Line Size: 00 > > >> 0x0010: BAR io addr: 0x00000000/0x0100 > > >> 0x0014: BAR empty (00000000) > > >> 0x0018: BAR mem 64bit addr: 0x00000000f0200000/0x00010000 > > >> 0x0020: BAR mem 64bit addr: 0x0000000000000000/0x00004000 > > >> 0x0028: Cardbus CIS: 00000000 > > >> 0x002c: Subsystem Vendor ID: 10ec Product ID: 8125 > > >> 0x0030: Expansion ROM Base Address: 00000000 > > >> 0x0038: 00000000 > > >> 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > > >> 0x0040: Capability 0x01: Power Management > > >> State: D0 > > >> 0x0050: Capability 0x05: Message Signalled Interrupts (MSI) > > >> Enabled: yes > > >> 0x0070: Capability 0x10: PCI Express > > >> Max Payload Size: 128 / 256 bytes > > >> Max Read Request Size: 512 bytes > > >> Link Speed: 5.0 / 5.0 GT/s > > >> Link Width: x1 / x1 > > >> 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > > >> 0x0148: Enhanced Capability 0x02: Virtual Channel Capability > > >> 0x0168: Enhanced Capability 0x03: Device Serial Number > > >> Serial Number: 0000000000000000 > > >> 0x0178: Enhanced Capability 0x17: TPH Requester > > >> 0x0204: Enhanced Capability 0x18: Latency Tolerance Reporting > > >> 0x020c: Enhanced Capability 0x1e: L1 PM > > >> 0x021c: Enhanced Capability 0x0b: Vendor-Specific > > >> 0x00b0: Capability 0x11: Extended Message Signalled Interrupts > > >> (MSI-X) > > >> Enabled: no; table size 32 (BAR 4:0) > > >> 0x00d0: Capability 0x03: Vital Product Data (VPD) > > >> 7f: [|vpd] > > >> linkstar$ ifconfig > > >> lo0: flags=2008049<UP,LOOPBACK,RUNNING,MULTICAST,LRO> mtu 32768 > > >> index 6 priority 0 llprio 3 > > >> groups: lo > > >> inet6 ::1 prefixlen 128 > > >> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 > > >> inet 127.0.0.1 netmask 0xff000000 > > >> dwqe0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> > > >> mtu 1500 > > >> lladdr 3e:68:a7:8e:7e:25 > > >> index 1 priority 0 llprio 3 > > >> media: Ethernet autoselect (none) > > >> status: no carrier > > >> dwqe1: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> > > >> mtu 1500 > > >> lladdr 3e:68:a7:8e:7e:24 > > >> index 2 priority 0 llprio 3 > > >> media: Ethernet autoselect (none) > > >> status: no carrier > > >> rge0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu > > >> 1500 > > >> lladdr 3e:68:a7:8e:7e:23 > > >> index 3 priority 0 llprio 3 > > >> media: Ethernet autoselect > > >> status: no carrier > > >> rge1: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu > > >> 1500 > > >> lladdr 3e:68:a7:8e:7e:22 > > >> index 4 priority 0 llprio 3 > > >> groups: egress > > >> media: Ethernet autoselect (1000baseT full-duplex) > > >> status: active > > >> inet 192.168.1.181 netmask 0xffffff00 broadcast 192.168.1.255 > > >> enc0: flags=0<> > > >> index 5 priority 0 llprio 3 > > >> groups: enc > > >> status: active > > >> pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33136 > > >> index 7 priority 0 llprio 3 > > >> groups: pflog > > >> > > >> --Z-- > > >> > > > > -- > > --Z-- > > > >