This is strange, i made absolutely no change, but OBSD now recognizes the WLAN
card as 6235 (this should be the correct):
linkstar$ dmesg
OpenBSD 7.4 (GENERIC.MP) #1: Mon Jan 15 04:02:12 CET 2024
szil...@linkstar.extrowerk.com:/sys/arch/arm64/compile/GENERIC.MP
real mem = 3959590912 (3776MB)
avail mem = 3759493120 (3585MB)
random: good seed from bootblocks
mainbus0 at root: HINLINK OPC-H68K Board
psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND
efi0 at mainbus0: UEFI 2.7
efi0: EDK2 rev 0x10000
smbios0 at efi0: SMBIOS 3.3.0
smbios0: vendor EDK2 version "miq" date 12/16/2023
smbios0: Firefly Firefly ROC-RK3568-PC
cpu0 at mainbus0 mpidr 0: ARM Cortex-A55 r2p0
cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
cpu0:
DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS
cpu1 at mainbus0 mpidr 100: ARM Cortex-A55 r2p0
cpu1: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu1: 512KB 64b/line 16-way L2 cache
cpu1:
DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS
cpu2 at mainbus0 mpidr 200: ARM Cortex-A55 r2p0
cpu2: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu2: 512KB 64b/line 16-way L2 cache
cpu2:
DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS
cpu3 at mainbus0 mpidr 300: ARM Cortex-A55 r2p0
cpu3: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu3: 512KB 64b/line 16-way L2 cache
cpu3:
DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS
scmi0 at mainbus0: SCMI 2.0
apm0 at mainbus0
agintc0 at mainbus0 mbi shift 4:4 nirq 352 nredist 4 ipi: 0, 1, 2:
"interrupt-controller"
syscon0 at mainbus0: "syscon"
rkiovd0 at syscon0
syscon1 at mainbus0: "syscon"
syscon2 at mainbus0: "syscon"
syscon3 at mainbus0: "syscon"
syscon4 at mainbus0: "syscon"
syscon5 at mainbus0: "syscon"
syscon6 at mainbus0: "syscon"
rkclock0 at mainbus0: PMUCRU
rkclock1 at mainbus0: CRU
syscon7 at mainbus0: "power-management"
"power-controller" at syscon7 not configured
syscon8 at mainbus0: "qos"
syscon9 at mainbus0: "qos"
syscon10 at mainbus0: "qos"
syscon11 at mainbus0: "qos"
syscon12 at mainbus0: "qos"
syscon13 at mainbus0: "qos"
syscon14 at mainbus0: "qos"
syscon15 at mainbus0: "qos"
syscon16 at mainbus0: "qos"
syscon17 at mainbus0: "qos"
syscon18 at mainbus0: "qos"
syscon19 at mainbus0: "qos"
syscon20 at mainbus0: "qos"
syscon21 at mainbus0: "qos"
syscon22 at mainbus0: "qos"
syscon23 at mainbus0: "qos"
syscon24 at mainbus0: "qos"
syscon25 at mainbus0: "qos"
syscon26 at mainbus0: "qos"
syscon27 at mainbus0: "qos"
syscon28 at mainbus0: "qos"
syscon29 at mainbus0: "qos"
syscon30 at mainbus0: "qos"
syscon31 at mainbus0: "qos"
rkcomphy0 at mainbus0
rkcomphy1 at mainbus0
rkusbphy0 at mainbus0: phy 0
rkusbphy1 at mainbus0: phy 1
rkpinctrl0 at mainbus0: "pinctrl"
rkgpio0 at rkpinctrl0
rkgpio1 at rkpinctrl0
rkgpio2 at rkpinctrl0
rkgpio3 at rkpinctrl0
rkgpio4 at rkpinctrl0
syscon32 at mainbus0: "syscon"
syscon33 at mainbus0: "qos"
syscon34 at mainbus0: "qos"
syscon35 at mainbus0: "qos"
syscon36 at mainbus0: "syscon"
rkpciephy0 at mainbus0
rkcomphy2 at mainbus0
"fit-images" at mainbus0 not configured
"opp-table-0" at mainbus0 not configured
"display-subsystem" at mainbus0 not configured
"firmware" at mainbus0 not configured
"opp-table-1" at mainbus0 not configured
simpleaudio0 at mainbus0
"pmu" at mainbus0 not configured
agtimer0 at mainbus0: 24000 kHz
"xin24m" at mainbus0 not configured
"xin32k" at mainbus0 not configured
"sram" at mainbus0 not configured
xhci0 at mainbus0, xHCI 1.10
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00
addr 1
ehci0 at mainbus0
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00
addr 1
ohci0 at mainbus0: version 1.0
ehci1 at mainbus0
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00
addr 1
ohci1 at mainbus0: version 1.0
rkiic0 at mainbus0
iic0 at rkiic0
fanpwr0 at iic0 addr 0x1c: TCS4525, 1.15 VDC
rkpmic0 at iic0 addr 0x20: RK809
rkpwm0 at mainbus0rkclock_get_frequency(rkclock0, 13)
: no clock
"gpu" at mainbus0 not configured
"video-codec" at mainbus0 not configured
"iommu" at mainbus0 not configured
"rga" at mainbus0 not configured
"video-codec" at mainbus0 not configured
"iommu" at mainbus0 not configured
dwqe0 at mainbus0 gmac 1: rev 0x00, address 3e:68:a7:8e:7e:25
rgephy0 at dwqe0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6
"vop" at mainbus0 not configured
"iommu" at mainbus0 not configured
"hdmi" at mainbus0 not configured
dwpcie0 at mainbus0
dwmmc0 at mainbus0: 50 MHz base clock
sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma
dwmshc0 at mainbus0
dwmshc0: SDHC 4.20, 200 MHz base clock
sdmmc1 at dwmshc0: 8-bit, sd high-speed, mmc high-speed, dma
"i2s" at mainbus0 not configured
"i2s" at mainbus0 not configured
"dma-controller" at mainbus0 not configured
"dma-controller" at mainbus0 not configured
rkiic1 at mainbus0
iic1 at rkiic1
"watchdog" at mainbus0 not configured
com0 at mainbus0: dw16550, 64 byte fifo
rktemp0 at mainbus0
"saradc" at mainbus0 not configured
ahci0 at mainbus0: AHCI 1.3
scsibus0 at ahci0: 32 targets
dwpcie1 at mainbus0
dwpcie2 at mainbus0
dwqe1 at mainbus0 gmac 0: rev 0x00, address 3e:68:a7:8e:7e:24
rgephy1 at dwqe1 phy 0: RTL8169S/8110S/8211 PHY, rev. 6
rkrng0 at mainbus0: ver 2
"hdmi-con" at mainbus0 not configured
gpiokeys0 at mainbus0: "reset"
gpioleds0 at mainbus0: no LEDs
"vcc12v-dcin" at mainbus0 not configured
"vcc3v3-sys" at mainbus0 not configured
"vcc5v0-sys" at mainbus0 not configured
"vcc5v0-usb" at mainbus0 not configured
"vcc5v0-usb-host" at mainbus0 not configured
"vcc3v3-pcie" at mainbus0 not configured
simpleaudio1 at mainbus0
pwmfan0 at mainbus0
simplefb0 at mainbus0: 3840x2160, 32bpp
wsdisplay0 at simplefb0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00
addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00
addr 1
pci0 at dwpcie0
ppb0 at pci0 dev 0 function 0 "Rockchip RK3566" rev 0x00
pci1 at ppb0 bus 1
iwn0 at pci1 dev 0 function 0 "Intel Centrino Advanced-N 6235" rev 0x24: msi,
MIMO 2T2R, AGN, address 08:d4:0c:13:a0:65
pci2 at dwpcie1
ppb1 at pci2 dev 0 function 0 "Rockchip RK3566" rev 0x00
pci3 at ppb1 bus 1
rge0 at pci3 dev 0 function 0 "Realtek RTL8125" rev 0x05: msi, address
00:00:00:00:00:00
pci4 at dwpcie2
ppb2 at pci4 dev 0 function 0 "Rockchip RK3566" rev 0x00
pci5 at ppb2 bus 1
rge1 at pci5 dev 0 function 0 "Realtek RTL8125" rev 0x05: msi, address
00:00:00:00:00:00
scsibus1 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <SD/MMC, NCard, 0010> removable
sd0: 14910MB, 512 bytes/sector, 30535680 sectors
sdmmc1: can't enable card
umass0 at uhub0 port 2 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev
3.20/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable
serial.0781558381075e2a041c
sd1: 29340MB, 512 bytes/sector, 60088320 sectors
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB Keyboard" rev
1.10/64.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1 "Logitech USB Keyboard" rev
1.10/64.02 addr 2
uhidev1: iclass 3/0, 5 report ids
ucc0 at uhidev1 reportid 1: 2 usages, 3 keys, enum
wskbd1 at ucc0 mux 1
wskbd1: connecting to wsdisplay0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
ucc1 at uhidev1 reportid 3: 21 usages, 14 keys, enum
wskbd2 at ucc1 mux 1
wskbd2: connecting to wsdisplay0
uhid1 at uhidev1 reportid 5: input=0, output=0, feature=5
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd1a (d9b3f31cd079d97e.a) swap on sd1b dump on sd1b
WARNING: bad clock chip time
WARNING: CHECK AND RESET THE DATE!
linkstar$ doas pcidump -v
Domain /dev/pci0:
0:0:0: Rockchip RK3566
0x0000: Vendor ID: 1d87, Product ID: 3566
0x0004: Command: 0007, Status: 0010
0x0008: Class: 06 Bridge, Subclass: 04 PCI,
Interface: 00, Revision: 00
0x000c: BIST: 00, Header Type: 01, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: Primary Bus: 0, Secondary Bus: 1, Subordinate Bus: 15,
Secondary Latency Timer: 00
0x001c: I/O Base: 01, I/O Limit: f1, Secondary Status: 0000
0x0020: Memory Base: f420, Memory Limit: f5f0
0x0024: Prefetch Memory Base: 4001, Prefetch Memory Limit: 7ff1
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: f410, I/O Limit Upper 16 Bits: f41f
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0000
0x0040: Capability 0x01: Power Management
State: D0
0x0050: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
0x0070: Capability 0x10: PCI Express
Max Payload Size: 128 / 128 bytes
Max Read Request Size: 512 bytes
Link Speed: 2.5 / 8.0 GT/s
Link Width: x1 / x1
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0148: Enhanced Capability 0x19: Secondary PCIe Capability
0x0160: Enhanced Capability 0x1e: L1 PM
0x0170: Enhanced Capability 0x0b: Vendor-Specific
0x00b0: Capability 0x11: Extended Message Signalled Interrupts (MSI-X)
Enabled: no; table size 1 (BAR 0:0)
1:0:0: Intel Centrino Advanced-N 6235
0x0000: Vendor ID: 8086, Product ID: 088f
0x0004: Command: 0006, Status: 0010
0x0008: Class: 02 Network, Subclass: 80 Miscellaneous,
Interface: 00, Revision: 24
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x00000000f4200000/0x00002000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 5260
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 00 Min Gnt: 00 Max Lat: 00
0x00c8: Capability 0x01: Power Management
State: D0
0x00d0: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: yes
0x00e0: Capability 0x10: PCI Express
Max Payload Size: 128 / 128 bytes
Max Read Request Size: 128 bytes
Link Speed: 2.5 / 2.5 GT/s
Link Width: x1 / x1
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0140: Enhanced Capability 0x03: Device Serial Number
Serial Number: 08d40cffff13a065
Domain /dev/pci1:
0:0:0: Rockchip RK3566
0x0000: Vendor ID: 1d87, Product ID: 3566
0x0004: Command: 0007, Status: 0010
0x0008: Class: 06 Bridge, Subclass: 04 PCI,
Interface: 00, Revision: 00
0x000c: BIST: 00, Header Type: 01, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: Primary Bus: 0, Secondary Bus: 1, Subordinate Bus: 15,
Secondary Latency Timer: 00
0x001c: I/O Base: 01, I/O Limit: f1, Secondary Status: 0000
0x0020: Memory Base: f220, Memory Limit: f3f0
0x0024: Prefetch Memory Base: 4001, Prefetch Memory Limit: 7ff1
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: f210, I/O Limit Upper 16 Bits: f21f
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0000
0x0040: Capability 0x01: Power Management
State: D0
0x0050: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
0x0070: Capability 0x10: PCI Express
Max Payload Size: 128 / 256 bytes
Max Read Request Size: 512 bytes
Link Speed: 2.5 / 8.0 GT/s
Link Width: x1 / x1
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0148: Enhanced Capability 0x19: Secondary PCIe Capability
0x0160: Enhanced Capability 0x1e: L1 PM
0x0170: Enhanced Capability 0x0b: Vendor-Specific
0x00b0: Capability 0x11: Extended Message Signalled Interrupts (MSI-X)
Enabled: no; table size 128 (BAR 4:131072)
1:0:0: Realtek RTL8125
0x0000: Vendor ID: 10ec, Product ID: 8125
0x0004: Command: 0006, Status: 0010
0x0008: Class: 02 Network, Subclass: 00 Ethernet,
Interface: 00, Revision: 05
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR io addr: 0x00000000/0x0100
0x0014: BAR empty (00000000)
0x0018: BAR mem 64bit addr: 0x00000000f2200000/0x00010000
0x0020: BAR mem 64bit addr: 0x0000000000000000/0x00004000
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 10ec Product ID: 8125
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0040: Capability 0x01: Power Management
State: D0
0x0050: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: yes
0x0070: Capability 0x10: PCI Express
Max Payload Size: 128 / 256 bytes
Max Read Request Size: 4096 bytes
Link Speed: 2.5 / 5.0 GT/s
Link Width: x1 / x1
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0148: Enhanced Capability 0x02: Virtual Channel Capability
0x0168: Enhanced Capability 0x03: Device Serial Number
Serial Number: 0000000000000000
0x0178: Enhanced Capability 0x17: TPH Requester
0x0204: Enhanced Capability 0x18: Latency Tolerance Reporting
0x020c: Enhanced Capability 0x1e: L1 PM
0x021c: Enhanced Capability 0x0b: Vendor-Specific
0x00b0: Capability 0x11: Extended Message Signalled Interrupts (MSI-X)
Enabled: no; table size 32 (BAR 4:0)
0x00d0: Capability 0x03: Vital Product Data (VPD)
7f: [|vpd]
Domain /dev/pci2:
0:0:0: Rockchip RK3566
0x0000: Vendor ID: 1d87, Product ID: 3566
0x0004: Command: 0007, Status: 0010
0x0008: Class: 06 Bridge, Subclass: 04 PCI,
Interface: 00, Revision: 00
0x000c: BIST: 00, Header Type: 01, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x0000000000000000/0x40000000
0x0018: Primary Bus: 0, Secondary Bus: 1, Subordinate Bus: 15,
Secondary Latency Timer: 00
0x001c: I/O Base: 01, I/O Limit: f1, Secondary Status: 0000
0x0020: Memory Base: f020, Memory Limit: f1f0
0x0024: Prefetch Memory Base: 4001, Prefetch Memory Limit: 7ff1
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: f010, I/O Limit Upper 16 Bits: f01f
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0000
0x0040: Capability 0x01: Power Management
State: D0
0x0050: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
0x0070: Capability 0x10: PCI Express
Max Payload Size: 128 / 256 bytes
Max Read Request Size: 512 bytes
Link Speed: 5.0 / 8.0 GT/s
Link Width: x1 / x2
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0148: Enhanced Capability 0x19: Secondary PCIe Capability
0x0160: Enhanced Capability 0x1e: L1 PM
0x01a0: Enhanced Capability 0x0b: Vendor-Specific
0x02a0: Enhanced Capability 0x0b: Vendor-Specific
0x00b0: Capability 0x11: Extended Message Signalled Interrupts (MSI-X)
Enabled: no; table size 128 (BAR 4:131072)
1:0:0: Realtek RTL8125
0x0000: Vendor ID: 10ec, Product ID: 8125
0x0004: Command: 0006, Status: 0010
0x0008: Class: 02 Network, Subclass: 00 Ethernet,
Interface: 00, Revision: 05
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR io addr: 0x00000000/0x0100
0x0014: BAR empty (00000000)
0x0018: BAR mem 64bit addr: 0x00000000f0200000/0x00010000
0x0020: BAR mem 64bit addr: 0x0000000000000000/0x00004000
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 10ec Product ID: 8125
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0040: Capability 0x01: Power Management
State: D0
0x0050: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: yes
0x0070: Capability 0x10: PCI Express
Max Payload Size: 128 / 256 bytes
Max Read Request Size: 4096 bytes
Link Speed: 5.0 / 5.0 GT/s
Link Width: x1 / x1
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0148: Enhanced Capability 0x02: Virtual Channel Capability
0x0168: Enhanced Capability 0x03: Device Serial Number
Serial Number: 0000000000000000
0x0178: Enhanced Capability 0x17: TPH Requester
0x0204: Enhanced Capability 0x18: Latency Tolerance Reporting
0x020c: Enhanced Capability 0x1e: L1 PM
0x021c: Enhanced Capability 0x0b: Vendor-Specific
0x00b0: Capability 0x11: Extended Message Signalled Interrupts (MSI-X)
Enabled: no; table size 32 (BAR 4:0)
0x00d0: Capability 0x03: Vital Product Data (VPD)
7f: [|vpd]
linkstar$ uname -a
OpenBSD linkstar.extrowerk.com 7.4 GENERIC.MP#1 arm64
linkstar$
Mike Larkin írta 2024. jan.. 15, H-n 09:17 órakor:
> On Mon, Jan 15, 2024 at 08:58:52AM +0100, Mizsei Zoltán wrote:
>> Thanks, that did the trick, see new dmesg below. Would it possible to enable
>> iwn* in the upstream sources?
>>
>> Best Regards,
>> --Zoltan
>>
>
> I think that should be doable. Mark, Patrick, any objections (and if no, do we
> want iwm in there too?)
>
> -ml
>
>> linkstar$ uname -a
>> OpenBSD linkstar.extrowerk.com 7.4 GENERIC.MP#1 arm64
>> linkstar$ dmesg
>> OpenBSD 7.4 (GENERIC.MP) #1: Mon Jan 15 04:02:12 CET 2024
>> szil...@linkstar.extrowerk.com:/sys/arch/arm64/compile/GENERIC.MP
>> real mem = 3959590912 (3776MB)
>> avail mem = 3759493120 (3585MB)
>> random: good seed from bootblocks
>> mainbus0 at root: HINLINK OPC-H68K Board
>> psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND
>> efi0 at mainbus0: UEFI 2.7
>> efi0: EDK2 rev 0x10000
>> smbios0 at efi0: SMBIOS 3.3.0
>> smbios0: vendor EDK2 version "miq" date 12/16/2023
>> smbios0: Firefly Firefly ROC-RK3568-PC
>> cpu0 at mainbus0 mpidr 0: ARM Cortex-A55 r2p0
>> cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
>> cpu0: 512KB 64b/line 16-way L2 cache
>> cpu0:
>> DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS
>> cpu1 at mainbus0 mpidr 100: ARM Cortex-A55 r2p0
>> cpu1: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
>> cpu1: 512KB 64b/line 16-way L2 cache
>> cpu1:
>> DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS
>> cpu2 at mainbus0 mpidr 200: ARM Cortex-A55 r2p0
>> cpu2: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
>> cpu2: 512KB 64b/line 16-way L2 cache
>> cpu2:
>> DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS
>> cpu3 at mainbus0 mpidr 300: ARM Cortex-A55 r2p0
>> cpu3: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
>> cpu3: 512KB 64b/line 16-way L2 cache
>> cpu3:
>> DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS
>> scmi0 at mainbus0: SCMI 2.0
>> apm0 at mainbus0
>> agintc0 at mainbus0 mbi shift 4:4 nirq 352 nredist 4 ipi: 0, 1, 2:
>> "interrupt-controller"
>> syscon0 at mainbus0: "syscon"
>> rkiovd0 at syscon0
>> syscon1 at mainbus0: "syscon"
>> syscon2 at mainbus0: "syscon"
>> syscon3 at mainbus0: "syscon"
>> syscon4 at mainbus0: "syscon"
>> syscon5 at mainbus0: "syscon"
>> syscon6 at mainbus0: "syscon"
>> rkclock0 at mainbus0: PMUCRU
>> rkclock1 at mainbus0: CRU
>> syscon7 at mainbus0: "power-management"
>> "power-controller" at syscon7 not configured
>> syscon8 at mainbus0: "qos"
>> syscon9 at mainbus0: "qos"
>> syscon10 at mainbus0: "qos"
>> syscon11 at mainbus0: "qos"
>> syscon12 at mainbus0: "qos"
>> syscon13 at mainbus0: "qos"
>> syscon14 at mainbus0: "qos"
>> syscon15 at mainbus0: "qos"
>> syscon16 at mainbus0: "qos"
>> syscon17 at mainbus0: "qos"
>> syscon18 at mainbus0: "qos"
>> syscon19 at mainbus0: "qos"
>> syscon20 at mainbus0: "qos"
>> syscon21 at mainbus0: "qos"
>> syscon22 at mainbus0: "qos"
>> syscon23 at mainbus0: "qos"
>> syscon24 at mainbus0: "qos"
>> syscon25 at mainbus0: "qos"
>> syscon26 at mainbus0: "qos"
>> syscon27 at mainbus0: "qos"
>> syscon28 at mainbus0: "qos"
>> syscon29 at mainbus0: "qos"
>> syscon30 at mainbus0: "qos"
>> syscon31 at mainbus0: "qos"
>> rkcomphy0 at mainbus0
>> rkcomphy1 at mainbus0
>> rkusbphy0 at mainbus0: phy 0
>> rkusbphy1 at mainbus0: phy 1
>> rkpinctrl0 at mainbus0: "pinctrl"
>> rkgpio0 at rkpinctrl0
>> rkgpio1 at rkpinctrl0
>> rkgpio2 at rkpinctrl0
>> rkgpio3 at rkpinctrl0
>> rkgpio4 at rkpinctrl0
>> syscon32 at mainbus0: "syscon"
>> syscon33 at mainbus0: "qos"
>> syscon34 at mainbus0: "qos"
>> syscon35 at mainbus0: "qos"
>> syscon36 at mainbus0: "syscon"
>> rkpciephy0 at mainbus0
>> rkcomphy2 at mainbus0
>> "fit-images" at mainbus0 not configured
>> "opp-table-0" at mainbus0 not configured
>> "display-subsystem" at mainbus0 not configured
>> "firmware" at mainbus0 not configured
>> "opp-table-1" at mainbus0 not configured
>> simpleaudio0 at mainbus0
>> "pmu" at mainbus0 not configured
>> agtimer0 at mainbus0: 24000 kHz
>> "xin24m" at mainbus0 not configured
>> "xin32k" at mainbus0 not configured
>> "sram" at mainbus0 not configured
>> xhci0 at mainbus0, xHCI 1.10
>> usb0 at xhci0: USB revision 3.0
>> uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev
>> 3.00/1.00 addr 1
>> ehci0 at mainbus0
>> usb1 at ehci0: USB revision 2.0
>> uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev
>> 2.00/1.00 addr 1
>> ohci0 at mainbus0: version 1.0
>> ehci1 at mainbus0
>> usb2 at ehci1: USB revision 2.0
>> uhub2 at usb2 configuration 1 interface 0 "Generic EHCI root hub" rev
>> 2.00/1.00 addr 1
>> ohci1 at mainbus0: version 1.0
>> rkiic0 at mainbus0
>> iic0 at rkiic0
>> fanpwr0 at iic0 addr 0x1c: TCS4525, 1.15 VDC
>> rkpmic0 at iic0 addr 0x20: RK809
>> rkpwm0 at mainbus0rkclock_get_frequency(rkclock0, 13)
>> : no clock
>> "gpu" at mainbus0 not configured
>> "video-codec" at mainbus0 not configured
>> "iommu" at mainbus0 not configured
>> "rga" at mainbus0 not configured
>> "video-codec" at mainbus0 not configured
>> "iommu" at mainbus0 not configured
>> dwqe0 at mainbus0 gmac 1: rev 0x00, address 3e:68:a7:8e:7e:25
>> rgephy0 at dwqe0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6
>> "vop" at mainbus0 not configured
>> "iommu" at mainbus0 not configured
>> "hdmi" at mainbus0 not configured
>> dwpcie0 at mainbus0
>> dwmmc0 at mainbus0: 50 MHz base clock
>> sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma
>> dwmshc0 at mainbus0
>> dwmshc0: SDHC 4.20, 200 MHz base clock
>> sdmmc1 at dwmshc0: 8-bit, sd high-speed, mmc high-speed, dma
>> "i2s" at mainbus0 not configured
>> "i2s" at mainbus0 not configured
>> "dma-controller" at mainbus0 not configured
>> "dma-controller" at mainbus0 not configured
>> rkiic1 at mainbus0
>> iic1 at rkiic1
>> "watchdog" at mainbus0 not configured
>> com0 at mainbus0: dw16550, 64 byte fifo
>> rktemp0 at mainbus0
>> "saradc" at mainbus0 not configured
>> ahci0 at mainbus0: AHCI 1.3
>> scsibus0 at ahci0: 32 targets
>> dwpcie1 at mainbus0
>> dwpcie2 at mainbus0
>> dwqe1 at mainbus0 gmac 0: rev 0x00, address 3e:68:a7:8e:7e:24
>> rgephy1 at dwqe1 phy 0: RTL8169S/8110S/8211 PHY, rev. 6
>> rkrng0 at mainbus0: ver 2
>> "hdmi-con" at mainbus0 not configured
>> gpiokeys0 at mainbus0: "reset"
>> gpioleds0 at mainbus0: no LEDs
>> "vcc12v-dcin" at mainbus0 not configured
>> "vcc3v3-sys" at mainbus0 not configured
>> "vcc5v0-sys" at mainbus0 not configured
>> "vcc5v0-usb" at mainbus0 not configured
>> "vcc5v0-usb-host" at mainbus0 not configured
>> "vcc3v3-pcie" at mainbus0 not configured
>> simpleaudio1 at mainbus0
>> pwmfan0 at mainbus0
>> simplefb0 at mainbus0: 3840x2160, 32bpp
>> wsdisplay0 at simplefb0 mux 1: console (std, vt100 emulation)
>> wsdisplay0: screen 1-5 added (std, vt100 emulation)
>> usb3 at ohci0: USB revision 1.0
>> uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev
>> 1.00/1.00 addr 1
>> usb4 at ohci1: USB revision 1.0
>> uhub4 at usb4 configuration 1 interface 0 "Generic OHCI root hub" rev
>> 1.00/1.00 addr 1
>> pci0 at dwpcie0
>> ppb0 at pci0 dev 0 function 0 "Rockchip RK3566" rev 0x00
>> pci1 at ppb0 bus 1
>> iwn0 at pci1 dev 0 function 0 "Intel WiFi Link 1030" rev 0x1a: msi, MIMO
>> 2T2R, AGN, address 08:d4:0c:13:a0:65
>> pci2 at dwpcie1
>> ppb1 at pci2 dev 0 function 0 "Rockchip RK3566" rev 0x00
>> pci3 at ppb1 bus 1
>> rge0 at pci3 dev 0 function 0 "Realtek RTL8125" rev 0x05: msi, address
>> 00:00:00:00:00:00
>> pci4 at dwpcie2
>> ppb2 at pci4 dev 0 function 0 "Rockchip RK3566" rev 0x00
>> pci5 at ppb2 bus 1
>> rge1 at pci5 dev 0 function 0 "Realtek RTL8125" rev 0x05: msi, address
>> 00:00:00:00:00:00
>> scsibus1 at sdmmc0: 2 targets, initiator 0
>> sd0 at scsibus1 targ 1 lun 0: <SD/MMC, NCard, 0010> removable
>> sd0: 14910MB, 512 bytes/sector, 30535680 sectors
>> sdmmc1: can't enable card
>> sdhc_sdclk_frequency_select: command in progress
>> umass0 at uhub0 port 2 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev
>> 3.20/1.00 addr 2
>> umass0: using SCSI over Bulk-Only
>> scsibus2 at umass0: 2 targets, initiator 0
>> sd1 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable
>> serial.0781558381075e2a041c
>> sd1: 29340MB, 512 bytes/sector, 60088320 sectors
>> uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB Keyboard"
>> rev 1.10/64.02 addr 2
>> uhidev0: iclass 3/1
>> ukbd0 at uhidev0: 8 variable keys, 6 key codes
>> wskbd0 at ukbd0: console keyboard, using wsdisplay0
>> uhidev1 at uhub4 port 1 configuration 1 interface 1 "Logitech USB Keyboard"
>> rev 1.10/64.02 addr 2
>> uhidev1: iclass 3/0, 5 report ids
>> ucc0 at uhidev1 reportid 1: 2 usages, 3 keys, enum
>> wskbd1 at ucc0 mux 1
>> wskbd1: connecting to wsdisplay0
>> uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
>> ucc1 at uhidev1 reportid 3: 21 usages, 14 keys, enum
>> wskbd2 at ucc1 mux 1
>> wskbd2: connecting to wsdisplay0
>> uhid1 at uhidev1 reportid 5: input=0, output=0, feature=5
>> vscsi0 at root
>> scsibus3 at vscsi0: 256 targets
>> softraid0 at root
>> scsibus4 at softraid0: 256 targets
>> root on sd1a (d9b3f31cd079d97e.a) swap on sd1b dump on sd1b
>> WARNING: bad clock chip time
>> WARNING: CHECK AND RESET THE DATE!
>> linkstar$ ifconfig
>> lo0: flags=2008049<UP,LOOPBACK,RUNNING,MULTICAST,LRO> mtu 32768
>> index 7 priority 0 llprio 3
>> groups: lo
>> inet6 ::1 prefixlen 128
>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7
>> inet 127.0.0.1 netmask 0xff000000
>> dwqe0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu
>> 1500
>> lladdr 3e:68:a7:8e:7e:25
>> index 1 priority 0 llprio 3
>> media: Ethernet autoselect (none)
>> status: no carrier
>> dwqe1: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu
>> 1500
>> lladdr 3e:68:a7:8e:7e:24
>> index 2 priority 0 llprio 3
>> media: Ethernet autoselect (none)
>> status: no carrier
>> iwn0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu 1500
>> lladdr 08:d4:0c:13:a0:65
>> index 3 priority 4 llprio 3
>> groups: wlan egress
>> media: IEEE802.11 autoselect (HT-MCS0 mode 11n)
>> status: active
>> ieee80211: join Linksys chan 1 bssid 50:eb:f6:83:09:cc -88dBm wpakey
>> wpaprotos wpa2 wpaakms psk wpaciphers ccmp wpagroupcipher ccmp
>> inet 192.168.1.226 netmask 0xffffff00 broadcast 192.168.1.255
>> rge0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu 1500
>> lladdr 3e:68:a7:8e:7e:23
>> index 4 priority 0 llprio 3
>> media: Ethernet autoselect
>> status: no carrier
>> rge1: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu 1500
>> lladdr 3e:68:a7:8e:7e:22
>> index 5 priority 0 llprio 3
>> groups: egress
>> media: Ethernet autoselect (1000baseT full-duplex)
>> status: active
>> inet 192.168.1.181 netmask 0xffffff00 broadcast 192.168.1.255
>> enc0: flags=0<>
>> index 6 priority 0 llprio 3
>> groups: enc
>> status: active
>> pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33136
>> index 8 priority 0 llprio 3
>> groups: pflog
>> linkstar$
>>
>> Mike Larkin írta 2024. jan.. 14, V-n 21:28 órakor:
>> > On Sun, Jan 14, 2024 at 09:13:54PM +0100, Mizsei Zoltán wrote:
>> >> Hi,
>> >>
>> >> I have messing with OpenBSD current on my LinkStar H68K ARM box, based on
>> >> the Rockchip RK3568 SOC. Originally it had an unsupported Mediatek wlan
>> >> card, which i have replaced it with an intel one i had lying around.
>> >> While OBSD recognizes the installed card, it categorically states it is
>> >> not-configured, while it supposed to be supported by the iwn driver.
>> >>
>> >> Sadly i did not made any photo about the card i have installed, and the
>> >> device is tricky to disassemble, but AFAIR the installed card is 0x8086,
>> >> 0x088f, "Intel Centrino Advanced-N 6235. What could cause a device
>> >> mis-recognition?
>> >>
>> >> Any idea what's going on here?
>> >>
>> >> Best Regards,
>> >> --Zoltan
>> >>
>> >
>> > iwn* at pci? is not in arm64 GENERIC.
>> >
>> > You might try adding that line to /sys/arch/arm64/conf/GENERIC (look for
>> > iwx
>> > just toss it after that). It might work.
>> >
>> > -ml
>> >
>> >> OpenBSD 7.4-current (GENERIC.MP) #40: Wed Jan 10 02:01:40 MST 2024
>> >> dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP
>> >> real mem = 3959590912 (3776MB)
>> >> avail mem = 3755196416 (3581MB)
>> >> random: good seed from bootblocks
>> >> mainbus0 at root: HINLINK OPC-H68K Board
>> >> psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND
>> >> efi0 at mainbus0: UEFI 2.7
>> >> efi0: EDK2 rev 0x10000
>> >> smbios0 at efi0: SMBIOS 3.3.0
>> >> smbios0: vendor EDK2 version "miq" date 12/16/2023
>> >> smbios0: Firefly Firefly ROC-RK3568-PC
>> >> cpu0 at mainbus0 mpidr 0: ARM Cortex-A55 r2p0
>> >> cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
>> >> cpu0: 512KB 64b/line 16-way L2 cache
>> >> cpu0:
>> >> DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS
>> >> cpu1 at mainbus0 mpidr 100: ARM Cortex-A55 r2p0
>> >> cpu1: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
>> >> cpu1: 512KB 64b/line 16-way L2 cache
>> >> cpu1:
>> >> DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS
>> >> cpu2 at mainbus0 mpidr 200: ARM Cortex-A55 r2p0
>> >> cpu2: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
>> >> cpu2: 512KB 64b/line 16-way L2 cache
>> >> cpu2:
>> >> DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS
>> >> cpu3 at mainbus0 mpidr 300: ARM Cortex-A55 r2p0
>> >> cpu3: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
>> >> cpu3: 512KB 64b/line 16-way L2 cache
>> >> cpu3:
>> >> DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS
>> >> scmi0 at mainbus0: SCMI 2.0
>> >> apm0 at mainbus0
>> >> agintc0 at mainbus0 mbi shift 4:4 nirq 352 nredist 4 ipi: 0, 1, 2:
>> >> "interrupt-controller"
>> >> syscon0 at mainbus0: "syscon"
>> >> rkiovd0 at syscon0
>> >> syscon1 at mainbus0: "syscon"
>> >> syscon2 at mainbus0: "syscon"
>> >> syscon3 at mainbus0: "syscon"
>> >> syscon4 at mainbus0: "syscon"
>> >> syscon5 at mainbus0: "syscon"
>> >> syscon6 at mainbus0: "syscon"
>> >> rkclock0 at mainbus0: PMUCRU
>> >> rkclock1 at mainbus0: CRU
>> >> syscon7 at mainbus0: "power-management"
>> >> "power-controller" at syscon7 not configured
>> >> syscon8 at mainbus0: "qos"
>> >> syscon9 at mainbus0: "qos"
>> >> syscon10 at mainbus0: "qos"
>> >> syscon11 at mainbus0: "qos"
>> >> syscon12 at mainbus0: "qos"
>> >> syscon13 at mainbus0: "qos"
>> >> syscon14 at mainbus0: "qos"
>> >> syscon15 at mainbus0: "qos"
>> >> syscon16 at mainbus0: "qos"
>> >> syscon17 at mainbus0: "qos"
>> >> syscon18 at mainbus0: "qos"
>> >> syscon19 at mainbus0: "qos"
>> >> syscon20 at mainbus0: "qos"
>> >> syscon21 at mainbus0: "qos"
>> >> syscon22 at mainbus0: "qos"
>> >> syscon23 at mainbus0: "qos"
>> >> syscon24 at mainbus0: "qos"
>> >> syscon25 at mainbus0: "qos"
>> >> syscon26 at mainbus0: "qos"
>> >> syscon27 at mainbus0: "qos"
>> >> syscon28 at mainbus0: "qos"
>> >> syscon29 at mainbus0: "qos"
>> >> syscon30 at mainbus0: "qos"
>> >> syscon31 at mainbus0: "qos"
>> >> rkcomphy0 at mainbus0
>> >> rkcomphy1 at mainbus0
>> >> rkusbphy0 at mainbus0: phy 0
>> >> rkusbphy1 at mainbus0: phy 1
>> >> rkpinctrl0 at mainbus0: "pinctrl"
>> >> rkgpio0 at rkpinctrl0
>> >> rkgpio1 at rkpinctrl0
>> >> rkgpio2 at rkpinctrl0
>> >> rkgpio3 at rkpinctrl0
>> >> rkgpio4 at rkpinctrl0
>> >> syscon32 at mainbus0: "syscon"
>> >> syscon33 at mainbus0: "qos"
>> >> syscon34 at mainbus0: "qos"
>> >> syscon35 at mainbus0: "qos"
>> >> syscon36 at mainbus0: "syscon"
>> >> rkpciephy0 at mainbus0
>> >> rkcomphy2 at mainbus0
>> >> "fit-images" at mainbus0 not configured
>> >> "opp-table-0" at mainbus0 not configured
>> >> "display-subsystem" at mainbus0 not configured
>> >> "firmware" at mainbus0 not configured
>> >> "opp-table-1" at mainbus0 not configured
>> >> simpleaudio0 at mainbus0
>> >> "pmu" at mainbus0 not configured
>> >> agtimer0 at mainbus0: 24000 kHz
>> >> "xin24m" at mainbus0 not configured
>> >> "xin32k" at mainbus0 not configured
>> >> "sram" at mainbus0 not configured
>> >> xhci0 at mainbus0, xHCI 1.10
>> >> usb0 at xhci0: USB revision 3.0
>> >> uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev
>> >> 3.00/1.00 addr 1
>> >> ehci0 at mainbus0
>> >> usb1 at ehci0: USB revision 2.0
>> >> uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev
>> >> 2.00/1.00 addr 1
>> >> ohci0 at mainbus0: version 1.0
>> >> ehci1 at mainbus0
>> >> usb2 at ehci1: USB revision 2.0
>> >> uhub2 at usb2 configuration 1 interface 0 "Generic EHCI root hub" rev
>> >> 2.00/1.00 addr 1
>> >> ohci1 at mainbus0: version 1.0
>> >> rkiic0 at mainbus0
>> >> iic0 at rkiic0
>> >> fanpwr0 at iic0 addr 0x1c: TCS4525, 1.15 VDC
>> >> rkpmic0 at iic0 addr 0x20: RK809
>> >> rkpwm0 at mainbus0rkclock_get_frequency(rkclock0, 13)
>> >> : no clock
>> >> "gpu" at mainbus0 not configured
>> >> "video-codec" at mainbus0 not configured
>> >> "iommu" at mainbus0 not configured
>> >> "rga" at mainbus0 not configured
>> >> "video-codec" at mainbus0 not configured
>> >> "iommu" at mainbus0 not configured
>> >> dwqe0 at mainbus0 gmac 1: rev 0x51, address 3e:68:a7:8e:7e:25
>> >> rgephy0 at dwqe0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6
>> >> "vop" at mainbus0 not configured
>> >> "iommu" at mainbus0 not configured
>> >> "hdmi" at mainbus0 not configured
>> >> dwpcie0 at mainbus0
>> >> dwmmc0 at mainbus0: 50 MHz base clock
>> >> sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma
>> >> dwmshc0 at mainbus0
>> >> dwmshc0: SDHC 4.20, 200 MHz base clock
>> >> sdmmc1 at dwmshc0: 8-bit, sd high-speed, mmc high-speed, dma
>> >> "i2s" at mainbus0 not configured
>> >> "i2s" at mainbus0 not configured
>> >> "dma-controller" at mainbus0 not configured
>> >> "dma-controller" at mainbus0 not configured
>> >> rkiic1 at mainbus0
>> >> iic1 at rkiic1
>> >> "watchdog" at mainbus0 not configured
>> >> com0 at mainbus0: dw16550, 64 byte fifo
>> >> rktemp0 at mainbus0
>> >> "saradc" at mainbus0 not configured
>> >> ahci0 at mainbus0: AHCI 1.3
>> >> scsibus0 at ahci0: 32 targets
>> >> dwpcie1 at mainbus0
>> >> dwpcie2 at mainbus0
>> >> dwqe1 at mainbus0 gmac 0: rev 0x51, address 3e:68:a7:8e:7e:24
>> >> rgephy1 at dwqe1 phy 0: RTL8169S/8110S/8211 PHY, rev. 6
>> >> rkrng0 at mainbus0: ver 2
>> >> "hdmi-con" at mainbus0 not configured
>> >> gpiokeys0 at mainbus0: "reset"
>> >> gpioleds0 at mainbus0: no LEDs
>> >> "vcc12v-dcin" at mainbus0 not configured
>> >> "vcc3v3-sys" at mainbus0 not configured
>> >> "vcc5v0-sys" at mainbus0 not configured
>> >> "vcc5v0-usb" at mainbus0 not configured
>> >> "vcc5v0-usb-host" at mainbus0 not configured
>> >> "vcc3v3-pcie" at mainbus0 not configured
>> >> simpleaudio1 at mainbus0
>> >> pwmfan0 at mainbus0
>> >> simplefb0 at mainbus0: 3840x2160, 32bpp
>> >> wsdisplay0 at simplefb0 mux 1: console (std, vt100 emulation)
>> >> wsdisplay0: screen 1-5 added (std, vt100 emulation)
>> >> usb3 at ohci0: USB revision 1.0
>> >> uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev
>> >> 1.00/1.00 addr 1
>> >> usb4 at ohci1: USB revision 1.0
>> >> uhub4 at usb4 configuration 1 interface 0 "Generic OHCI root hub" rev
>> >> 1.00/1.00 addr 1
>> >> pci0 at dwpcie0
>> >> ppb0 at pci0 dev 0 function 0 "Rockchip RK3566" rev 0x00
>> >> pci1 at ppb0 bus 1
>> >> "Intel WiFi Link 1030" rev 0x1a at pci1 dev 0 function 0 not configured
>> >> pci2 at dwpcie1
>> >> ppb1 at pci2 dev 0 function 0 "Rockchip RK3566" rev 0x00
>> >> pci3 at ppb1 bus 1
>> >> rge0 at pci3 dev 0 function 0 "Realtek RTL8125" rev 0x05: msi, address
>> >> 00:00:00:00:00:00
>> >> pci4 at dwpcie2
>> >> ppb2 at pci4 dev 0 function 0 "Rockchip RK3566" rev 0x00
>> >> pci5 at ppb2 bus 1
>> >> rge1 at pci5 dev 0 function 0 "Realtek RTL8125" rev 0x05: msi, address
>> >> 00:00:00:00:00:00
>> >> scsibus1 at sdmmc0: 2 targets, initiator 0
>> >> sd0 at scsibus1 targ 1 lun 0: <SD/MMC, NCard, 0010> removable
>> >> sd0: 14910MB, 512 bytes/sector, 30535680 sectors
>> >> sdmmc1: can't enable card
>> >> sdhc_sdclk_frequency_select: command in progress
>> >> umass0 at uhub0 port 2 configuration 1 interface 0 "USB SanDisk 3.2Gen1"
>> >> rev 3.20/1.00 addr 2
>> >> umass0: using SCSI over Bulk-Only
>> >> scsibus2 at umass0: 2 targets, initiator 0
>> >> sd1 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable
>> >> serial.0781558381075e2a041c
>> >> sd1: 29340MB, 512 bytes/sector, 60088320 sectors
>> >> uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB
>> >> Keyboard" rev 1.10/64.02 addr 2
>> >> uhidev0: iclass 3/1
>> >> ukbd0 at uhidev0: 8 variable keys, 6 key codes
>> >> wskbd0 at ukbd0: console keyboard, using wsdisplay0
>> >> uhidev1 at uhub4 port 1 configuration 1 interface 1 "Logitech USB
>> >> Keyboard" rev 1.10/64.02 addr 2
>> >> uhidev1: iclass 3/0, 5 report ids
>> >> ucc0 at uhidev1 reportid 1: 2 usages, 3 keys, enum
>> >> wskbd1 at ucc0 mux 1
>> >> wskbd1: connecting to wsdisplay0
>> >> uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
>> >> ucc1 at uhidev1 reportid 3: 21 usages, 14 keys, enum
>> >> wskbd2 at ucc1 mux 1
>> >> wskbd2: connecting to wsdisplay0
>> >> uhid1 at uhidev1 reportid 5: input=0, output=0, feature=5
>> >> vscsi0 at root
>> >> scsibus3 at vscsi0: 256 targets
>> >> softraid0 at root
>> >> scsibus4 at softraid0: 256 targets
>> >> root on sd1a (d9b3f31cd079d97e.a) swap on sd1b dump on sd1b
>> >> WARNING: bad clock chip time
>> >> WARNING: CHECK AND RESET THE DATE!
>> >> linkstar$
>> >> linkstar$
>> >> linkstar$
>> >> linkstar$ uname -a
>> >> OpenBSD linkstar.extrowerk.com 7.4 GENERIC.MP#40 arm64
>> >> linkstar$ doas pcidump -v
>> >> doas (szil...@linkstar.extrowerk.com) password:
>> >> Domain /dev/pci0:
>> >> 0:0:0: Rockchip RK3566
>> >> 0x0000: Vendor ID: 1d87, Product ID: 3566
>> >> 0x0004: Command: 0007, Status: 0010
>> >> 0x0008: Class: 06 Bridge, Subclass: 04 PCI,
>> >> Interface: 00, Revision: 00
>> >> 0x000c: BIST: 00, Header Type: 01, Latency Timer: 00,
>> >> Cache Line Size: 00
>> >> 0x0010: BAR empty (00000000)
>> >> 0x0014: BAR empty (00000000)
>> >> 0x0018: Primary Bus: 0, Secondary Bus: 1, Subordinate Bus: 15,
>> >> Secondary Latency Timer: 00
>> >> 0x001c: I/O Base: 01, I/O Limit: f1, Secondary Status: 0000
>> >> 0x0020: Memory Base: f420, Memory Limit: f5f0
>> >> 0x0024: Prefetch Memory Base: 4001, Prefetch Memory Limit: 7ff1
>> >> 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
>> >> 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
>> >> 0x0030: I/O Base Upper 16 Bits: f410, I/O Limit Upper 16 Bits:
>> >> f41f
>> >> 0x0038: Expansion ROM Base Address: 00000000
>> >> 0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0000
>> >> 0x0040: Capability 0x01: Power Management
>> >> State: D0
>> >> 0x0050: Capability 0x05: Message Signalled Interrupts (MSI)
>> >> Enabled: no
>> >> 0x0070: Capability 0x10: PCI Express
>> >> Max Payload Size: 128 / 128 bytes
>> >> Max Read Request Size: 512 bytes
>> >> Link Speed: 2.5 / 8.0 GT/s
>> >> Link Width: x1 / x1
>> >> 0x0100: Enhanced Capability 0x01: Advanced Error Reporting
>> >> 0x0148: Enhanced Capability 0x19: Secondary PCIe Capability
>> >> 0x0160: Enhanced Capability 0x1e: L1 PM
>> >> 0x0170: Enhanced Capability 0x0b: Vendor-Specific
>> >> 0x00b0: Capability 0x11: Extended Message Signalled Interrupts
>> >> (MSI-X)
>> >> Enabled: no; table size 1 (BAR 0:0)
>> >> 1:0:0: Intel WiFi Link 1030
>> >> 0x0000: Vendor ID: 8086, Product ID: 008a
>> >> 0x0004: Command: 0000, Status: 0010
>> >> 0x0008: Class: 02 Network, Subclass: 80 Miscellaneous,
>> >> Interface: 00, Revision: 1a
>> >> 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
>> >> Cache Line Size: 00
>> >> 0x0010: BAR mem 64bit addr: 0x0000000000000000/0x00002000
>> >> 0x0018: BAR empty (00000000)
>> >> 0x001c: BAR empty (00000000)
>> >> 0x0020: BAR empty (00000000)
>> >> 0x0024: BAR empty (00000000)
>> >> 0x0028: Cardbus CIS: 00000000
>> >> 0x002c: Subsystem Vendor ID: 8086 Product ID: 0000
>> >> 0x0030: Expansion ROM Base Address: 00000000
>> >> 0x0038: 00000000
>> >> 0x003c: Interrupt Pin: 01 Line: 00 Min Gnt: 00 Max Lat: 00
>> >> 0x00c8: Capability 0x01: Power Management
>> >> State: D0
>> >> 0x00d0: Capability 0x05: Message Signalled Interrupts (MSI)
>> >> Enabled: no
>> >> 0x00e0: Capability 0x10: PCI Express
>> >> Max Payload Size: 128 / 128 bytes
>> >> Max Read Request Size: 128 bytes
>> >> Link Speed: 2.5 / 2.5 GT/s
>> >> Link Width: x1 / x1
>> >> 0x0100: Enhanced Capability 0x01: Advanced Error Reporting
>> >> 0x0140: Enhanced Capability 0x03: Device Serial Number
>> >> Serial Number: 000000ffff000000
>> >> Domain /dev/pci1:
>> >> 0:0:0: Rockchip RK3566
>> >> 0x0000: Vendor ID: 1d87, Product ID: 3566
>> >> 0x0004: Command: 0007, Status: 0010
>> >> 0x0008: Class: 06 Bridge, Subclass: 04 PCI,
>> >> Interface: 00, Revision: 00
>> >> 0x000c: BIST: 00, Header Type: 01, Latency Timer: 00,
>> >> Cache Line Size: 00
>> >> 0x0010: BAR empty (00000000)
>> >> 0x0014: BAR empty (00000000)
>> >> 0x0018: Primary Bus: 0, Secondary Bus: 1, Subordinate Bus: 15,
>> >> Secondary Latency Timer: 00
>> >> 0x001c: I/O Base: 01, I/O Limit: f1, Secondary Status: 0000
>> >> 0x0020: Memory Base: f220, Memory Limit: f3f0
>> >> 0x0024: Prefetch Memory Base: 4001, Prefetch Memory Limit: 7ff1
>> >> 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
>> >> 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
>> >> 0x0030: I/O Base Upper 16 Bits: f210, I/O Limit Upper 16 Bits:
>> >> f21f
>> >> 0x0038: Expansion ROM Base Address: 00000000
>> >> 0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0000
>> >> 0x0040: Capability 0x01: Power Management
>> >> State: D0
>> >> 0x0050: Capability 0x05: Message Signalled Interrupts (MSI)
>> >> Enabled: no
>> >> 0x0070: Capability 0x10: PCI Express
>> >> Max Payload Size: 128 / 256 bytes
>> >> Max Read Request Size: 512 bytes
>> >> Link Speed: 2.5 / 8.0 GT/s
>> >> Link Width: x1 / x1
>> >> 0x0100: Enhanced Capability 0x01: Advanced Error Reporting
>> >> 0x0148: Enhanced Capability 0x19: Secondary PCIe Capability
>> >> 0x0160: Enhanced Capability 0x1e: L1 PM
>> >> 0x0170: Enhanced Capability 0x0b: Vendor-Specific
>> >> 0x00b0: Capability 0x11: Extended Message Signalled Interrupts
>> >> (MSI-X)
>> >> Enabled: no; table size 128 (BAR 4:131072)
>> >> 1:0:0: Realtek RTL8125
>> >> 0x0000: Vendor ID: 10ec, Product ID: 8125
>> >> 0x0004: Command: 0006, Status: 0010
>> >> 0x0008: Class: 02 Network, Subclass: 00 Ethernet,
>> >> Interface: 00, Revision: 05
>> >> 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
>> >> Cache Line Size: 00
>> >> 0x0010: BAR io addr: 0x00000000/0x0100
>> >> 0x0014: BAR empty (00000000)
>> >> 0x0018: BAR mem 64bit addr: 0x00000000f2200000/0x00010000
>> >> 0x0020: BAR mem 64bit addr: 0x0000000000000000/0x00004000
>> >> 0x0028: Cardbus CIS: 00000000
>> >> 0x002c: Subsystem Vendor ID: 10ec Product ID: 8125
>> >> 0x0030: Expansion ROM Base Address: 00000000
>> >> 0x0038: 00000000
>> >> 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
>> >> 0x0040: Capability 0x01: Power Management
>> >> State: D0
>> >> 0x0050: Capability 0x05: Message Signalled Interrupts (MSI)
>> >> Enabled: yes
>> >> 0x0070: Capability 0x10: PCI Express
>> >> Max Payload Size: 128 / 256 bytes
>> >> Max Read Request Size: 512 bytes
>> >> Link Speed: 2.5 / 5.0 GT/s
>> >> Link Width: x1 / x1
>> >> 0x0100: Enhanced Capability 0x01: Advanced Error Reporting
>> >> 0x0148: Enhanced Capability 0x02: Virtual Channel Capability
>> >> 0x0168: Enhanced Capability 0x03: Device Serial Number
>> >> Serial Number: 0000000000000000
>> >> 0x0178: Enhanced Capability 0x17: TPH Requester
>> >> 0x0204: Enhanced Capability 0x18: Latency Tolerance Reporting
>> >> 0x020c: Enhanced Capability 0x1e: L1 PM
>> >> 0x021c: Enhanced Capability 0x0b: Vendor-Specific
>> >> 0x00b0: Capability 0x11: Extended Message Signalled Interrupts
>> >> (MSI-X)
>> >> Enabled: no; table size 32 (BAR 4:0)
>> >> 0x00d0: Capability 0x03: Vital Product Data (VPD)
>> >> 7f: [|vpd]
>> >> Domain /dev/pci2:
>> >> 0:0:0: Rockchip RK3566
>> >> 0x0000: Vendor ID: 1d87, Product ID: 3566
>> >> 0x0004: Command: 0007, Status: 0010
>> >> 0x0008: Class: 06 Bridge, Subclass: 04 PCI,
>> >> Interface: 00, Revision: 00
>> >> 0x000c: BIST: 00, Header Type: 01, Latency Timer: 00,
>> >> Cache Line Size: 00
>> >> 0x0010: BAR mem 64bit addr: 0x0000000000000000/0x40000000
>> >> 0x0018: Primary Bus: 0, Secondary Bus: 1, Subordinate Bus: 15,
>> >> Secondary Latency Timer: 00
>> >> 0x001c: I/O Base: 01, I/O Limit: f1, Secondary Status: 0000
>> >> 0x0020: Memory Base: f020, Memory Limit: f1f0
>> >> 0x0024: Prefetch Memory Base: 4001, Prefetch Memory Limit: 7ff1
>> >> 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
>> >> 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
>> >> 0x0030: I/O Base Upper 16 Bits: f010, I/O Limit Upper 16 Bits:
>> >> f01f
>> >> 0x0038: Expansion ROM Base Address: 00000000
>> >> 0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0000
>> >> 0x0040: Capability 0x01: Power Management
>> >> State: D0
>> >> 0x0050: Capability 0x05: Message Signalled Interrupts (MSI)
>> >> Enabled: no
>> >> 0x0070: Capability 0x10: PCI Express
>> >> Max Payload Size: 128 / 256 bytes
>> >> Max Read Request Size: 512 bytes
>> >> Link Speed: 5.0 / 8.0 GT/s
>> >> Link Width: x1 / x2
>> >> 0x0100: Enhanced Capability 0x01: Advanced Error Reporting
>> >> 0x0148: Enhanced Capability 0x19: Secondary PCIe Capability
>> >> 0x0160: Enhanced Capability 0x1e: L1 PM
>> >> 0x01a0: Enhanced Capability 0x0b: Vendor-Specific
>> >> 0x02a0: Enhanced Capability 0x0b: Vendor-Specific
>> >> 0x00b0: Capability 0x11: Extended Message Signalled Interrupts
>> >> (MSI-X)
>> >> Enabled: no; table size 128 (BAR 4:131072)
>> >> 1:0:0: Realtek RTL8125
>> >> 0x0000: Vendor ID: 10ec, Product ID: 8125
>> >> 0x0004: Command: 0006, Status: 0010
>> >> 0x0008: Class: 02 Network, Subclass: 00 Ethernet,
>> >> Interface: 00, Revision: 05
>> >> 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
>> >> Cache Line Size: 00
>> >> 0x0010: BAR io addr: 0x00000000/0x0100
>> >> 0x0014: BAR empty (00000000)
>> >> 0x0018: BAR mem 64bit addr: 0x00000000f0200000/0x00010000
>> >> 0x0020: BAR mem 64bit addr: 0x0000000000000000/0x00004000
>> >> 0x0028: Cardbus CIS: 00000000
>> >> 0x002c: Subsystem Vendor ID: 10ec Product ID: 8125
>> >> 0x0030: Expansion ROM Base Address: 00000000
>> >> 0x0038: 00000000
>> >> 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
>> >> 0x0040: Capability 0x01: Power Management
>> >> State: D0
>> >> 0x0050: Capability 0x05: Message Signalled Interrupts (MSI)
>> >> Enabled: yes
>> >> 0x0070: Capability 0x10: PCI Express
>> >> Max Payload Size: 128 / 256 bytes
>> >> Max Read Request Size: 512 bytes
>> >> Link Speed: 5.0 / 5.0 GT/s
>> >> Link Width: x1 / x1
>> >> 0x0100: Enhanced Capability 0x01: Advanced Error Reporting
>> >> 0x0148: Enhanced Capability 0x02: Virtual Channel Capability
>> >> 0x0168: Enhanced Capability 0x03: Device Serial Number
>> >> Serial Number: 0000000000000000
>> >> 0x0178: Enhanced Capability 0x17: TPH Requester
>> >> 0x0204: Enhanced Capability 0x18: Latency Tolerance Reporting
>> >> 0x020c: Enhanced Capability 0x1e: L1 PM
>> >> 0x021c: Enhanced Capability 0x0b: Vendor-Specific
>> >> 0x00b0: Capability 0x11: Extended Message Signalled Interrupts
>> >> (MSI-X)
>> >> Enabled: no; table size 32 (BAR 4:0)
>> >> 0x00d0: Capability 0x03: Vital Product Data (VPD)
>> >> 7f: [|vpd]
>> >> linkstar$ ifconfig
>> >> lo0: flags=2008049<UP,LOOPBACK,RUNNING,MULTICAST,LRO> mtu 32768
>> >> index 6 priority 0 llprio 3
>> >> groups: lo
>> >> inet6 ::1 prefixlen 128
>> >> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
>> >> inet 127.0.0.1 netmask 0xff000000
>> >> dwqe0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu
>> >> 1500
>> >> lladdr 3e:68:a7:8e:7e:25
>> >> index 1 priority 0 llprio 3
>> >> media: Ethernet autoselect (none)
>> >> status: no carrier
>> >> dwqe1: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu
>> >> 1500
>> >> lladdr 3e:68:a7:8e:7e:24
>> >> index 2 priority 0 llprio 3
>> >> media: Ethernet autoselect (none)
>> >> status: no carrier
>> >> rge0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu
>> >> 1500
>> >> lladdr 3e:68:a7:8e:7e:23
>> >> index 3 priority 0 llprio 3
>> >> media: Ethernet autoselect
>> >> status: no carrier
>> >> rge1: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu
>> >> 1500
>> >> lladdr 3e:68:a7:8e:7e:22
>> >> index 4 priority 0 llprio 3
>> >> groups: egress
>> >> media: Ethernet autoselect (1000baseT full-duplex)
>> >> status: active
>> >> inet 192.168.1.181 netmask 0xffffff00 broadcast 192.168.1.255
>> >> enc0: flags=0<>
>> >> index 5 priority 0 llprio 3
>> >> groups: enc
>> >> status: active
>> >> pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33136
>> >> index 7 priority 0 llprio 3
>> >> groups: pflog
>> >>
>> >> --Z--
>> >>
>>
>> --
>> --Z--
>>
--
--Z--
