This began at some point after the vcpu enhancement.
# vmd -dvvvvv output, and dmesg follow.
---
vmd: startup
vmd: vm_register: registering vm 1
vmd: /etc/vm.conf:11: vm "lab" registered (disabled)
vmd: /etc/vm.conf:15: switch "perm" registered
vmd: vm_priv_brconfig: interface veb0 rdomain 1
vmd: vm_priv_brconfig: interface veb0 description switch1-perm
vmd: vmd_configure: setting staggered start configuration to parallelism: 4 and
delay: 30
vmd: vmd_configure: starting vms in staggered fashion
vmd: start_vm_batch: starting batch of 4 vms
vmd: start_vm_batch: not starting vm lab (disabled)
vmd: start_vm_batch: done starting vms
priv: config_getconfig: priv retrieving config
control: config_getconfig: control retrieving config
vmm: config_getconfig: vmm retrieving config
agentx: config_getconfig: agentx retrieving config
vmd: vm_opentty: vm lab tty /dev/ttyp1 uid 1000 gid 4 mode 620
vmm: vm_register: registering vm 1
vmd: vm_priv_ifconfig: interface tap0 description vm1-if0-lab
vmd: vm_priv_ifconfig: switch "perm" interface veb0 add tap0
vmd: vm_priv_ifconfig: interface tap0 rdomain 1
vmd: vm_priv_ifconfig: interface tap0 address 100.64.1.2/31
vmd: started lab (vm 1) successfully, tty /dev/ttyp1
vm/lab: loadfile_bios: loaded BIOS image
vm/lab: mmio_dev_add: added mmio handler for range [0xf0000000 - 0xffbfffff]
vm/lab: mmio_dev_add: added mmio handler for range [0xfec00000 - 0xfec0ffff]
vm/lab: mmio_dev_add: added mmio handler for range [0xfee00000 - 0xfee00fff]
vm/lab: acpi_init: initializing acpi tables
vm/lab: acpi_init: DSDT loaded successfully (523 bytes)
vm/lab: acpi_create_facs: writing FACS to efff4000
vm/lab: acpi_create_fadt: creating FADT
vm/lab: acpi_create_fadt: FADT size 268
vm/lab: acpi_create_fadt: DSDT pointer 0xefff3000 / 0x0
vm/lab: acpi_create_fadt: writing FADT to efff2000
vm/lab: acpi_create_fadt: FADT creation complete
vm/lab: acpi_init: FADT created pointing to DSDT
vm/lab: acpi_create_madt: creating MADT
vm/lab: acpi_create_madt: MADT size 64
vm/lab: acpi_create_madt: computed MADT checksum 0x70
vm/lab: acpi_create_madt: writing MADT to efff1000
vm/lab: acpi_create_madt: MADT creation complete
vm/lab: acpi_create_xsdt: creating XSDT
vm/lab: acpi_create_xsdt: XSDT size 52
vm/lab: acpi_create_xsdt: writing XSDT to efff0000
vm/lab: acpi_create_xsdt: XSDT creation complete
vm/lab: acpi_create_rsdp: creating RSDP
vm/lab: acpi_create_rsdp: writing RSDP to 9d000
vm/lab: acpi_create_rsdp: RSDP creation complete
vm/lab: acpi_init: writing RSDP pointer 0x9d00 -> 0x40e
vm/lab: pic_set_elcr: setting level triggered mode for irq 3
vm/lab: pic_set_elcr: setting level triggered mode for irq 5
vm/lab: virtio_init: vm "lab" vio0 lladdr fe:e1:bb:d1:e0:2d, local
vm/lab: pic_set_elcr: setting level triggered mode for irq 6
vm/lab: pic_set_elcr: setting level triggered mode for irq 7
vm/lab: lab: launching vioblk1
priv: SIOCAIFADDR: Device busy
vm/lab: virtio_dev_launch: sending 'd' type device struct
vm/lab: virtio_dev_launch: sending vm message for 'lab'
vm/lab/vioblk: vioblk_main: got viblk dev. num disk fds = 1, sync fd = 17,
async fd = 19, capacity = 0 seg_max = 126, vm fd = 3
vm/lab/vioblk1: vioblk_main: initialized vioblk1 with raw image
(capacity=10485760)
vm/lab/vioblk1: vioblk_main: wiring in async vm event handler (fd=19)
vm/lab/vioblk1: vm_device_pipe: initializing 'd' device pipe (fd=19)
vm/lab/vioblk1: vioblk_main: wiring in sync channel handler (fd=17)
vm/lab/vioblk1: vioblk_main: telling vm lab device is ready
vm/lab/vioblk1: vioblk_main: sending heartbeat
vm/lab: virtio_dev_launch: device reports ready via sync channel
vm/lab: vm_device_pipe: initializing 'd' device pipe (fd=18)
vm/lab: lab: launching vioblk0
vm/lab: virtio_dev_launch: sending 'd' type device struct
vm/lab: virtio_dev_launch: sending vm message for 'lab'
vm/lab/vioblk: vioblk_main: got viblk dev. num disk fds = 1, sync fd = 17,
async fd = 20, capacity = 0 seg_max = 126, vm fd = 3
vm/lab/vioblk0: vioblk_main: initialized vioblk0 with raw image
(capacity=62914560)
vm/lab/vioblk0: vioblk_main: wiring in async vm event handler (fd=20)
vm/lab/vioblk0: vm_device_pipe: initializing 'd' device pipe (fd=20)
vm/lab/vioblk0: vioblk_main: wiring in sync channel handler (fd=17)
vm/lab/vioblk0: vioblk_main: telling vm lab device is ready
vm/lab/vioblk0: vioblk_main: sending heartbeat
vm/lab: virtio_dev_launch: device reports ready via sync channel
vm/lab: vm_device_pipe: initializing 'd' device pipe (fd=19)
vm/lab: lab: launching vionet0
vm/lab: virtio_dev_launch: sending 'n' type device struct
vm/lab: virtio_dev_launch: sending vm message for 'lab'
vm/lab/vionet: vionet_main: got vionet dev. tap fd = 9, syncfd = 17, asyncfd =
21, vm fd = 3
vm/lab/vionet0: vionet_main: wiring in async vm event handler (fd=21)
vm/lab/vionet0: vm_device_pipe: initializing 'n' device pipe (fd=21)
vm/lab/vionet0: vionet_main: wiring in sync channel handler (fd=17)
vm/lab/vionet0: vionet_main: telling vm lab device is ready
vm/lab/vionet0: vionet_main: sending async ready message
vm/lab: virtio_dev_launch: device reports ready via sync channel
vm/lab: vm_device_pipe: initializing 'n' device pipe (fd=20)
vm/lab: pic_set_elcr: setting level triggered mode for irq 9
vm/lab: run_vm: starting 1 vcpu thread(s) for vm lab
vm/lab: vcpu_reset: resetting vcpu 0
vm/lab: run_vm: waiting on events for VM lab
vm/lab: lab: received tap addr fe:e1:ba:d3:49:aa for nic 0
vm/lab: handle_dev_msg: device reports ready
vm/lab: handle_dev_msg: device reports ready
vm/lab: handle_dev_msg: device reports ready
vm/lab/vionet0: dev_dispatch_vm: set hostmac
vm/lab: vcpu_exit_fw_cfg: selector 0x0000
vm/lab: vcpu_exit_fw_cfg: selector 0x0001
vm/lab: fw_cfg_handle_dma: selector 0x0019
vm/lab: fw_cfg_file_dir: file directory with 4 files
vm/lab: 36B 0020 etc/acpi/rsdp
vm/lab: 128B 0021 etc/table-loader
vm/lab: 120B 0022 etc/e820
vm/lab: 4B 0023 etc/screen-and-debug
vm/lab: vcpu_exit_fw_cfg: selector 0x0022
vm/lab: fw_cfg_select_file: accessing file etc/e820
vm/lab: fw_cfg_handle_dma: selector 0x000d
vm/lab: fw_cfg_select: unhandled selector d
vm/lab: fw_cfg_handle_dma: selector 0x000f
vm/lab: fw_cfg_handle_dma: selector 0x8000
vm/lab: fw_cfg_select: unhandled selector 8000
vm/lab: fw_cfg_handle_dma: selector 0x8001
vm/lab: fw_cfg_select: unhandled selector 8001
vm/lab: fw_cfg_handle_dma: selector 0x0019
vm/lab: fw_cfg_file_dir: file directory with 4 files
vm/lab: 36B 0020 etc/acpi/rsdp
vm/lab: 128B 0021 etc/table-loader
vm/lab: 120B 0022 etc/e820
vm/lab: 4B 0023 etc/screen-and-debug
vm/lab: fw_cfg_handle_dma: selector 0x0004
vm/lab: i8259_write_datareg: master pic, reset IRQ vector to 0x8
vm/lab: i8259_write_datareg: slave pic, reset IRQ vector to 0x70
vm/lab: fw_cfg_handle_dma: selector 0x000f
vm/lab: fw_cfg_handle_dma: selector 0x0005
vm/lab: translate_gva: unpaged, va=pa=0xf600f
vm/lab: translate_gva: unpaged, va=pa=0xf6017
vm/lab: translate_gva: unpaged, va=pa=0xf601c
vm/lab: translate_gva: unpaged, va=pa=0xf6026
vm/lab: translate_gva: unpaged, va=pa=0xf603a
vm/lab: translate_gva: unpaged, va=pa=0xf6044
vm/lab: fw_cfg_handle_dma: selector 0x0005
vm/lab: fw_cfg_handle_dma: selector 0x0021
vm/lab: fw_cfg_select_file: accessing file etc/table-loader
vm/lab: fw_cfg_handle_dma: selector 0x0020
vm/lab: fw_cfg_select_file: accessing file etc/acpi/rsdp
vm/lab: fw_cfg_handle_dma: selector 0x0023
vm/lab: fw_cfg_select_file: accessing file etc/screen-and-debug
vm/lab: vcpu_process_com_lcr: set baudrate = 115200
vm/lab: vcpu_process_com_lcr: set baudrate = 115200
vm/lab: vcpu_process_com_lcr: set baudrate = 115200
vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
vm/lab: i8259_write_datareg: master pic, reset IRQ vector to 0x20
vm/lab: i8259_write_datareg: slave pic, reset IRQ vector to 0x28
vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
vm/lab: vcpu_process_com_lcr: set baudrate = 115200
vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
vm/lab: vcpu_process_com_lcr: set baudrate = 115200
vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
vm/lab: vcpu_exit_eptviolation: instruction might cross page boundary
vm/lab: virtio_shutdown: waiting on device pid 50277
vm/lab/vionet0: rx_run_loop: exiting (0)
vm/lab/vionet0: tx_run_loop: exiting (0)
vm/lab: virtio_shutdown: device for pid 50277 is stopped
vm/lab: virtio_shutdown: waiting on device pid 78826
vm/lab: virtio_shutdown: device for pid 78826 is stopped
vm/lab: virtio_shutdown: waiting on device pid 7508
vm/lab: virtio_shutdown: device for pid 7508 is stopped
vmm: vmm_sighdlr: handling signal 20
vmm: vmm_sighdlr: vm lab exited (id 1)
vmm: vm_remove: vmm vmm_sighdlr removing vm 1 from running config
vmm: vm_stop: vmm vmm_sighdlr stopping vm 1
vmd: vm_stop: vmd vmd_dispatch_vmm stopping vm 1
vmd: vmd_dispatch_vmm: vm: 1, vm_state: 0x2
vmd: vmd_sighdlr: handling signal
vmd: vmd_shutdown: performing shutdown
vmd: vm_remove: vmd vmd_shutdown removing vm 1 from running config
vmm: vmm exiting, pid 24049
vmd: vm_stop: vmd vmd_shutdown stopping vm 1
priv: priv exiting, pid 94500
control: control exiting, pid 42958
agentx: agentx exiting, pid 130
vmd: terminating
---
OpenBSD 8.0-beta (GENERIC.MP) #57: Sat Sep 26 00:32:32 MDT 2026
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17034862592 (16245MB)
avail mem = 16494858240 (15730MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xbcd2d000 (66 entries)
bios0: vendor LENOVO version "GMET91WW (2.39 )" date 06/03/2021
bios0: LENOVO 20BE00BTUS
efi0 at bios0: UEFI 2.3.1
efi0: Lenovo rev 0x2390
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC DBGP ECDT HPET APIC MCFG SSDT SSDT SSDT SSDT SSDT
SSDT SSDT PCCT SSDT TCPA UEFI MSDM ASF! BATB FPDT UEFI BGRT
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) EXP3(S4) XHCI(S3)
EHC1(S3) EHC2(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-4210M CPU @ 2.60GHz, 2594.03 MHz, 06-3c-03, patch
00000028
cpu0: cpuid 1
edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
ecx=77dafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=77<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=27ab<FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID>
edx=9c000600<SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=3, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=1<XSAVEOPT>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=21<LAHF,ABM>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line
8-way L2 cache, 3MB 64b/line 12-way L3 cache
cpu0: smt 0, core 0, package 0, type P
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-4210M CPU @ 2.60GHz, 2594.02 MHz, 06-3c-03, patch
00000028
cpu1: smt 1, core 0, package 0, type SP
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-4210M CPU @ 2.60GHz, 2594.03 MHz, 06-3c-03, patch
00000028
cpu2: smt 0, core 1, package 0, type P
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-4210M CPU @ 2.60GHz, 2594.08 MHz, 06-3c-03, patch
00000028
cpu3: smt 1, core 1, package 0, type SP
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 3 (EXP1)
acpiprt3 at acpi0: bus 4 (EXP2)
acpiprt4 at acpi0: bus 5 (EXP3)
acpiprt5 at acpi0: bus -1 (EXP6)
acpibtn0 at acpi0: LID_(wakeup)
acpibtn1 at acpi0: SLPB(wakeup)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"LEN0071" at acpi0 not configured
"LEN0034" at acpi0 not configured
tpm0 at acpi0 TPM_ 1.2 (TIS) addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e
acpibat0 at acpi0: BAT0 model "45N1769" serial 3053 type LION oem "SANYO"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0: version 1.0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT340F" at acpi0 not configured
acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2
acpipwrres1 at acpi0: NVP3, resource for PEG_
acpipwrres2 at acpi0: NVP2, resource for PEG_
acpitz0 at acpi0
acpitz0: critical temperature is 200 degC
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD0
acpivideo1 at acpi0: VID_
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2300, 2200, 2100,
2000, 1800, 1700, 1600, 1400, 1300, 1200, 1100, 900, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x06
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4600" rev 0x06
drm0 at inteldrm0
inteldrm0: msi, HASWELL, gen 7
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x06: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel I217-LM" rev 0x04: msi, address
54:ee:75:63:2d:55
ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Realtek ALC292
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd4: msi
pci1 at ppb0 bus 3
rtsx0 at pci1 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
ppb1 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xd4: msi
pci2 at ppb1 bus 4
iwm0 at pci2 dev 0 function 0 "Intel AC 7260" rev 0x6b, msi
ppb2 at pci0 dev 28 function 2 "Intel 8 Series PCIE" rev 0xd4: msi
pci3 at ppb2 bus 5
ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM87 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 5: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7LN512, MVT0> naa.5002538d005dbce6
sd0: 488386MB, 512 bytes/sector, 1000215216 sectors, thin
cd0 at scsibus1 targ 5 lun 0: <MATSHITA, DVD-RAM UJ8G2, 1.00> removable
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300 0x2d9440 0xd001a3
0x12f800
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
iwm0: restrict all mbufs to low memory
uvideo0 at uhub0 port 12 configuration 1 interface 0 "SunplusIT INC. Integrated
Camera" rev 2.00/26.03 addr 2
video0 at uvideo0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.04 addr 2
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.04 addr 2
sdmmc0: can't enable card
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 488126MB, 512 bytes/sector, 999682111 sectors
root on sd1a (ff46b9ed41b27d65.a) swap on sd1b dump on sd1b
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwm0: hw rev 0x140, fw ver 17.3216344376.0, address cc:3d:82:8a:6e:25
