On Tue, Sep 29, 2026 at 05:19:56PM -0700, Mike Larkin wrote:
> On Sat, Sep 26, 2026 at 09:49:32AM -0400, Josh Grosse wrote:
> > On Sat, Sep 26, 2026 at 09:32:04AM -0400, Josh Grosse wrote:
> > > This began at some point after the vcpu enhancement.
> >
> > Adding the vm.conf. Guest is 7.9-release.
> >
> > ---
> >
> > files= /home/josh/vm/
> >
> > vm lab {
> > disable
> > owner josh
> > memory 8g
> > disk $files lab/disk.drive
> > disk $files lab/releases/usr.ports.drive
> > local interface tap0 rdomain 1 switch perm
> > }
> >
> > switch perm {
> > interface veb0 rdomain 1
> > }
> >
> > ---
> >
> > > # vmd -dvvvvv output, and dmesg follow.
> > >
> > > ---
> > >
>
> can't reproduce this locally with i386 7.9 original release nor the latest
> syspatch kernel. tried mp and up.
>
> can you run strings on the guest kernel inside the vm disk and tell me what
> build it is?
>
> -ml
OpenBSD
GENERIC#329
@(#)OpenBSD 7.9 (GENERIC) #329: Wed May 6 14:56:46 MDT 2026
OpenBSD 7.9 (GENERIC) #329: Wed May 6 14:56:46 MDT 2026
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
>
> > > vmd: startup
> > > vmd: vm_register: registering vm 1
> > > vmd: /etc/vm.conf:11: vm "lab" registered (disabled)
> > > vmd: /etc/vm.conf:15: switch "perm" registered
> > > vmd: vm_priv_brconfig: interface veb0 rdomain 1
> > > vmd: vm_priv_brconfig: interface veb0 description switch1-perm
> > > vmd: vmd_configure: setting staggered start configuration to parallelism:
> > > 4 and delay: 30
> > > vmd: vmd_configure: starting vms in staggered fashion
> > > vmd: start_vm_batch: starting batch of 4 vms
> > > vmd: start_vm_batch: not starting vm lab (disabled)
> > > vmd: start_vm_batch: done starting vms
> > > priv: config_getconfig: priv retrieving config
> > > control: config_getconfig: control retrieving config
> > > vmm: config_getconfig: vmm retrieving config
> > > agentx: config_getconfig: agentx retrieving config
> > > vmd: vm_opentty: vm lab tty /dev/ttyp1 uid 1000 gid 4 mode 620
> > > vmm: vm_register: registering vm 1
> > > vmd: vm_priv_ifconfig: interface tap0 description vm1-if0-lab
> > > vmd: vm_priv_ifconfig: switch "perm" interface veb0 add tap0
> > > vmd: vm_priv_ifconfig: interface tap0 rdomain 1
> > > vmd: vm_priv_ifconfig: interface tap0 address 100.64.1.2/31
> > > vmd: started lab (vm 1) successfully, tty /dev/ttyp1
> > > vm/lab: loadfile_bios: loaded BIOS image
> > > vm/lab: mmio_dev_add: added mmio handler for range [0xf0000000 -
> > > 0xffbfffff]
> > > vm/lab: mmio_dev_add: added mmio handler for range [0xfec00000 -
> > > 0xfec0ffff]
> > > vm/lab: mmio_dev_add: added mmio handler for range [0xfee00000 -
> > > 0xfee00fff]
> > > vm/lab: acpi_init: initializing acpi tables
> > > vm/lab: acpi_init: DSDT loaded successfully (523 bytes)
> > > vm/lab: acpi_create_facs: writing FACS to efff4000
> > > vm/lab: acpi_create_fadt: creating FADT
> > > vm/lab: acpi_create_fadt: FADT size 268
> > > vm/lab: acpi_create_fadt: DSDT pointer 0xefff3000 / 0x0
> > > vm/lab: acpi_create_fadt: writing FADT to efff2000
> > > vm/lab: acpi_create_fadt: FADT creation complete
> > > vm/lab: acpi_init: FADT created pointing to DSDT
> > > vm/lab: acpi_create_madt: creating MADT
> > > vm/lab: acpi_create_madt: MADT size 64
> > > vm/lab: acpi_create_madt: computed MADT checksum 0x70
> > > vm/lab: acpi_create_madt: writing MADT to efff1000
> > > vm/lab: acpi_create_madt: MADT creation complete
> > > vm/lab: acpi_create_xsdt: creating XSDT
> > > vm/lab: acpi_create_xsdt: XSDT size 52
> > > vm/lab: acpi_create_xsdt: writing XSDT to efff0000
> > > vm/lab: acpi_create_xsdt: XSDT creation complete
> > > vm/lab: acpi_create_rsdp: creating RSDP
> > > vm/lab: acpi_create_rsdp: writing RSDP to 9d000
> > > vm/lab: acpi_create_rsdp: RSDP creation complete
> > > vm/lab: acpi_init: writing RSDP pointer 0x9d00 -> 0x40e
> > > vm/lab: pic_set_elcr: setting level triggered mode for irq 3
> > > vm/lab: pic_set_elcr: setting level triggered mode for irq 5
> > > vm/lab: virtio_init: vm "lab" vio0 lladdr fe:e1:bb:d1:e0:2d, local
> > > vm/lab: pic_set_elcr: setting level triggered mode for irq 6
> > > vm/lab: pic_set_elcr: setting level triggered mode for irq 7
> > > vm/lab: lab: launching vioblk1
> > > priv: SIOCAIFADDR: Device busy
> > > vm/lab: virtio_dev_launch: sending 'd' type device struct
> > > vm/lab: virtio_dev_launch: sending vm message for 'lab'
> > > vm/lab/vioblk: vioblk_main: got viblk dev. num disk fds = 1, sync fd =
> > > 17, async fd = 19, capacity = 0 seg_max = 126, vm fd = 3
> > > vm/lab/vioblk1: vioblk_main: initialized vioblk1 with raw image
> > > (capacity=10485760)
> > > vm/lab/vioblk1: vioblk_main: wiring in async vm event handler (fd=19)
> > > vm/lab/vioblk1: vm_device_pipe: initializing 'd' device pipe (fd=19)
> > > vm/lab/vioblk1: vioblk_main: wiring in sync channel handler (fd=17)
> > > vm/lab/vioblk1: vioblk_main: telling vm lab device is ready
> > > vm/lab/vioblk1: vioblk_main: sending heartbeat
> > > vm/lab: virtio_dev_launch: device reports ready via sync channel
> > > vm/lab: vm_device_pipe: initializing 'd' device pipe (fd=18)
> > > vm/lab: lab: launching vioblk0
> > > vm/lab: virtio_dev_launch: sending 'd' type device struct
> > > vm/lab: virtio_dev_launch: sending vm message for 'lab'
> > > vm/lab/vioblk: vioblk_main: got viblk dev. num disk fds = 1, sync fd =
> > > 17, async fd = 20, capacity = 0 seg_max = 126, vm fd = 3
> > > vm/lab/vioblk0: vioblk_main: initialized vioblk0 with raw image
> > > (capacity=62914560)
> > > vm/lab/vioblk0: vioblk_main: wiring in async vm event handler (fd=20)
> > > vm/lab/vioblk0: vm_device_pipe: initializing 'd' device pipe (fd=20)
> > > vm/lab/vioblk0: vioblk_main: wiring in sync channel handler (fd=17)
> > > vm/lab/vioblk0: vioblk_main: telling vm lab device is ready
> > > vm/lab/vioblk0: vioblk_main: sending heartbeat
> > > vm/lab: virtio_dev_launch: device reports ready via sync channel
> > > vm/lab: vm_device_pipe: initializing 'd' device pipe (fd=19)
> > > vm/lab: lab: launching vionet0
> > > vm/lab: virtio_dev_launch: sending 'n' type device struct
> > > vm/lab: virtio_dev_launch: sending vm message for 'lab'
> > > vm/lab/vionet: vionet_main: got vionet dev. tap fd = 9, syncfd = 17,
> > > asyncfd = 21, vm fd = 3
> > > vm/lab/vionet0: vionet_main: wiring in async vm event handler (fd=21)
> > > vm/lab/vionet0: vm_device_pipe: initializing 'n' device pipe (fd=21)
> > > vm/lab/vionet0: vionet_main: wiring in sync channel handler (fd=17)
> > > vm/lab/vionet0: vionet_main: telling vm lab device is ready
> > > vm/lab/vionet0: vionet_main: sending async ready message
> > > vm/lab: virtio_dev_launch: device reports ready via sync channel
> > > vm/lab: vm_device_pipe: initializing 'n' device pipe (fd=20)
> > > vm/lab: pic_set_elcr: setting level triggered mode for irq 9
> > > vm/lab: run_vm: starting 1 vcpu thread(s) for vm lab
> > > vm/lab: vcpu_reset: resetting vcpu 0
> > > vm/lab: run_vm: waiting on events for VM lab
> > > vm/lab: lab: received tap addr fe:e1:ba:d3:49:aa for nic 0
> > > vm/lab: handle_dev_msg: device reports ready
> > > vm/lab: handle_dev_msg: device reports ready
> > > vm/lab: handle_dev_msg: device reports ready
> > > vm/lab/vionet0: dev_dispatch_vm: set hostmac
> > > vm/lab: vcpu_exit_fw_cfg: selector 0x0000
> > > vm/lab: vcpu_exit_fw_cfg: selector 0x0001
> > > vm/lab: fw_cfg_handle_dma: selector 0x0019
> > > vm/lab: fw_cfg_file_dir: file directory with 4 files
> > > vm/lab: 36B 0020 etc/acpi/rsdp
> > > vm/lab: 128B 0021 etc/table-loader
> > > vm/lab: 120B 0022 etc/e820
> > > vm/lab: 4B 0023 etc/screen-and-debug
> > > vm/lab: vcpu_exit_fw_cfg: selector 0x0022
> > > vm/lab: fw_cfg_select_file: accessing file etc/e820
> > > vm/lab: fw_cfg_handle_dma: selector 0x000d
> > > vm/lab: fw_cfg_select: unhandled selector d
> > > vm/lab: fw_cfg_handle_dma: selector 0x000f
> > > vm/lab: fw_cfg_handle_dma: selector 0x8000
> > > vm/lab: fw_cfg_select: unhandled selector 8000
> > > vm/lab: fw_cfg_handle_dma: selector 0x8001
> > > vm/lab: fw_cfg_select: unhandled selector 8001
> > > vm/lab: fw_cfg_handle_dma: selector 0x0019
> > > vm/lab: fw_cfg_file_dir: file directory with 4 files
> > > vm/lab: 36B 0020 etc/acpi/rsdp
> > > vm/lab: 128B 0021 etc/table-loader
> > > vm/lab: 120B 0022 etc/e820
> > > vm/lab: 4B 0023 etc/screen-and-debug
> > > vm/lab: fw_cfg_handle_dma: selector 0x0004
> > > vm/lab: i8259_write_datareg: master pic, reset IRQ vector to 0x8
> > > vm/lab: i8259_write_datareg: slave pic, reset IRQ vector to 0x70
> > > vm/lab: fw_cfg_handle_dma: selector 0x000f
> > > vm/lab: fw_cfg_handle_dma: selector 0x0005
> > > vm/lab: translate_gva: unpaged, va=pa=0xf600f
> > > vm/lab: translate_gva: unpaged, va=pa=0xf6017
> > > vm/lab: translate_gva: unpaged, va=pa=0xf601c
> > > vm/lab: translate_gva: unpaged, va=pa=0xf6026
> > > vm/lab: translate_gva: unpaged, va=pa=0xf603a
> > > vm/lab: translate_gva: unpaged, va=pa=0xf6044
> > > vm/lab: fw_cfg_handle_dma: selector 0x0005
> > > vm/lab: fw_cfg_handle_dma: selector 0x0021
> > > vm/lab: fw_cfg_select_file: accessing file etc/table-loader
> > > vm/lab: fw_cfg_handle_dma: selector 0x0020
> > > vm/lab: fw_cfg_select_file: accessing file etc/acpi/rsdp
> > > vm/lab: fw_cfg_handle_dma: selector 0x0023
> > > vm/lab: fw_cfg_select_file: accessing file etc/screen-and-debug
> > > vm/lab: vcpu_process_com_lcr: set baudrate = 115200
> > > vm/lab: vcpu_process_com_lcr: set baudrate = 115200
> > > vm/lab: vcpu_process_com_lcr: set baudrate = 115200
> > > vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
> > > vm/lab: i8259_write_datareg: master pic, reset IRQ vector to 0x20
> > > vm/lab: i8259_write_datareg: slave pic, reset IRQ vector to 0x28
> > > vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
> > > vm/lab: vcpu_process_com_lcr: set baudrate = 115200
> > > vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
> > > vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
> > > vm/lab: vcpu_process_com_lcr: set baudrate = 115200
> > > vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
> > > vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
> > > vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
> > > vm/lab: vcpu_exit_eptviolation: instruction might cross page boundary
> > > vm/lab: virtio_shutdown: waiting on device pid 50277
> > > vm/lab/vionet0: rx_run_loop: exiting (0)
> > > vm/lab/vionet0: tx_run_loop: exiting (0)
> > > vm/lab: virtio_shutdown: device for pid 50277 is stopped
> > > vm/lab: virtio_shutdown: waiting on device pid 78826
> > > vm/lab: virtio_shutdown: device for pid 78826 is stopped
> > > vm/lab: virtio_shutdown: waiting on device pid 7508
> > > vm/lab: virtio_shutdown: device for pid 7508 is stopped
> > > vmm: vmm_sighdlr: handling signal 20
> > > vmm: vmm_sighdlr: vm lab exited (id 1)
> > > vmm: vm_remove: vmm vmm_sighdlr removing vm 1 from running config
> > > vmm: vm_stop: vmm vmm_sighdlr stopping vm 1
> > > vmd: vm_stop: vmd vmd_dispatch_vmm stopping vm 1
> > > vmd: vmd_dispatch_vmm: vm: 1, vm_state: 0x2
> > > vmd: vmd_sighdlr: handling signal
> > > vmd: vmd_shutdown: performing shutdown
> > > vmd: vm_remove: vmd vmd_shutdown removing vm 1 from running config
> > > vmm: vmm exiting, pid 24049
> > > vmd: vm_stop: vmd vmd_shutdown stopping vm 1
> > > priv: priv exiting, pid 94500
> > > control: control exiting, pid 42958
> > > agentx: agentx exiting, pid 130
> > > vmd: terminating
> > >
> > > ---
> > >
> > > OpenBSD 8.0-beta (GENERIC.MP) #57: Sat Sep 26 00:32:32 MDT 2026
> > > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > > real mem = 17034862592 (16245MB)
> > > avail mem = 16494858240 (15730MB)
> > > random: good seed from bootblocks
> > > mpath0 at root
> > > scsibus0 at mpath0: 256 targets
> > > mainbus0 at root
> > > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xbcd2d000 (66 entries)
> > > bios0: vendor LENOVO version "GMET91WW (2.39 )" date 06/03/2021
> > > bios0: LENOVO 20BE00BTUS
> > > efi0 at bios0: UEFI 2.3.1
> > > efi0: Lenovo rev 0x2390
> > > acpi0 at bios0: ACPI 5.0
> > > acpi0: sleep states S0 S3 S4 S5
> > > acpi0: tables DSDT FACP SLIC DBGP ECDT HPET APIC MCFG SSDT SSDT SSDT SSDT
> > > SSDT SSDT SSDT PCCT SSDT TCPA UEFI MSDM ASF! BATB FPDT UEFI BGRT
> > > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) EXP3(S4)
> > > XHCI(S3) EHC1(S3) EHC2(S3)
> > > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > > acpiec0 at acpi0
> > > acpihpet0 at acpi0: 14318179 Hz
> > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > > cpu0 at mainbus0: apid 0 (boot processor)
> > > cpu0: Intel(R) Core(TM) i5-4210M CPU @ 2.60GHz, 2594.03 MHz, 06-3c-03,
> > > patch 00000028
> > > cpu0: cpuid 1
> > > edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> > >
> > > ecx=77dafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
> > > cpu0: cpuid 6 eax=77<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
> > > cpu0: cpuid 7.0
> > > ebx=27ab<FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID>
> > > edx=9c000600<SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD>
> > > cpu0: cpuid a vers=3, gp=4, gpwidth=48, ff=3, ffwidth=48
> > > cpu0: cpuid d.1 eax=1<XSAVEOPT>
> > > cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG>
> > > ecx=21<LAHF,ABM>
> > > cpu0: cpuid 80000007 edx=100<ITSC>
> > > cpu0: MELTDOWN
> > > cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB
> > > 64b/line 8-way L2 cache, 3MB 64b/line 12-way L3 cache
> > > cpu0: smt 0, core 0, package 0, type P
> > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> > > cpu0: apic clock running at 99MHz
> > > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
> > > cpu1 at mainbus0: apid 1 (application processor)
> > > cpu1: Intel(R) Core(TM) i5-4210M CPU @ 2.60GHz, 2594.02 MHz, 06-3c-03,
> > > patch 00000028
> > > cpu1: smt 1, core 0, package 0, type SP
> > > cpu2 at mainbus0: apid 2 (application processor)
> > > cpu2: Intel(R) Core(TM) i5-4210M CPU @ 2.60GHz, 2594.03 MHz, 06-3c-03,
> > > patch 00000028
> > > cpu2: smt 0, core 1, package 0, type P
> > > cpu3 at mainbus0: apid 3 (application processor)
> > > cpu3: Intel(R) Core(TM) i5-4210M CPU @ 2.60GHz, 2594.08 MHz, 06-3c-03,
> > > patch 00000028
> > > cpu3: smt 1, core 1, package 0, type SP
> > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> > > acpimcfg0 at acpi0
> > > acpimcfg0: addr 0xf8000000, bus 0-63
> > > acpiprt0 at acpi0: bus 0 (PCI0)
> > > acpiprt1 at acpi0: bus -1 (PEG_)
> > > acpiprt2 at acpi0: bus 3 (EXP1)
> > > acpiprt3 at acpi0: bus 4 (EXP2)
> > > acpiprt4 at acpi0: bus 5 (EXP3)
> > > acpiprt5 at acpi0: bus -1 (EXP6)
> > > acpibtn0 at acpi0: LID_(wakeup)
> > > acpibtn1 at acpi0: SLPB(wakeup)
> > > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> > > acpicmos0 at acpi0
> > > "LEN0071" at acpi0 not configured
> > > "LEN0034" at acpi0 not configured
> > > tpm0 at acpi0 TPM_ 1.2 (TIS) addr 0xfed40000/0x5000, device 0x0000104a
> > > rev 0x4e
> > > acpibat0 at acpi0: BAT0 model "45N1769" serial 3053 type LION oem "SANYO"
> > > acpiac0 at acpi0: AC unit online
> > > acpithinkpad0 at acpi0: version 1.0
> > > "PNP0C14" at acpi0 not configured
> > > "PNP0C14" at acpi0 not configured
> > > "PNP0C14" at acpi0 not configured
> > > "INT340F" at acpi0 not configured
> > > acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
> > > acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
> > > acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
> > > acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
> > > acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2
> > > acpipwrres1 at acpi0: NVP3, resource for PEG_
> > > acpipwrres2 at acpi0: NVP2, resource for PEG_
> > > acpitz0 at acpi0
> > > acpitz0: critical temperature is 200 degC
> > > acpivideo0 at acpi0: VID_
> > > acpivout0 at acpivideo0: LCD0
> > > acpivideo1 at acpi0: VID_
> > > cpu0: using VERW MDS workaround (except on vmm entry)
> > > cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2300, 2200,
> > > 2100, 2000, 1800, 1700, 1600, 1400, 1300, 1200, 1100, 900, 800 MHz
> > > pci0 at mainbus0 bus 0
> > > pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x06
> > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4600" rev 0x06
> > > drm0 at inteldrm0
> > > inteldrm0: msi, HASWELL, gen 7
> > > azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x06: msi
> > > azalia0: No codecs found
> > > xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI
> > > 1.0
> > > usb0 at xhci0: USB revision 3.0
> > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> > > 3.00/1.00 addr 1
> > > "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> > > em0 at pci0 dev 25 function 0 "Intel I217-LM" rev 0x04: msi, address
> > > 54:ee:75:63:2d:55
> > > ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int
> > > 16
> > > usb1 at ehci0: USB revision 2.0
> > > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> > > 2.00/1.00 addr 1
> > > azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
> > > azalia1: codecs: Realtek ALC292
> > > audio0 at azalia1
> > > ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd4: msi
> > > pci1 at ppb0 bus 3
> > > rtsx0 at pci1 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi
> > > sdmmc0 at rtsx0: 4-bit, dma
> > > ppb1 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xd4: msi
> > > pci2 at ppb1 bus 4
> > > iwm0 at pci2 dev 0 function 0 "Intel AC 7260" rev 0x6b, msi
> > > ppb2 at pci0 dev 28 function 2 "Intel 8 Series PCIE" rev 0xd4: msi
> > > pci3 at ppb2 bus 5
> > > ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int
> > > 23
> > > usb2 at ehci1: USB revision 2.0
> > > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
> > > 2.00/1.00 addr 1
> > > pcib0 at pci0 dev 31 function 0 "Intel QM87 LPC" rev 0x04
> > > ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI
> > > 1.3
> > > ahci0: port 0: 6.0Gb/s
> > > ahci0: port 5: 1.5Gb/s
> > > scsibus1 at ahci0: 32 targets
> > > sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7LN512, MVT0>
> > > naa.5002538d005dbce6
> > > sd0: 488386MB, 512 bytes/sector, 1000215216 sectors, thin
> > > cd0 at scsibus1 targ 5 lun 0: <MATSHITA, DVD-RAM UJ8G2, 1.00> removable
> > > ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2
> > > int 18
> > > iic0 at ichiic0
> > > isa0 at pcib0
> > > isadma0 at isa0
> > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > > pckbd0 at pckbc0 (kbd slot)
> > > wskbd0 at pckbd0: console keyboard
> > > pms0 at pckbc0 (aux slot)
> > > wsmouse0 at pms0 mux 0
> > > wsmouse1 at pms0 mux 0
> > > pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300 0x2d9440
> > > 0xd001a3 0x12f800
> > > pcppi0 at isa0 port 0x61
> > > spkr0 at pcppi0
> > > vmm0 at mainbus0: VMX/EPT
> > > efifb at mainbus0 not configured
> > > iwm0: restrict all mbufs to low memory
> > > uvideo0 at uhub0 port 12 configuration 1 interface 0 "SunplusIT INC.
> > > Integrated Camera" rev 2.00/26.03 addr 2
> > > video0 at uvideo0
> > > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
> > > Hub" rev 2.00/0.04 addr 2
> > > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
> > > Hub" rev 2.00/0.04 addr 2
> > > sdmmc0: can't enable card
> > > vscsi0 at root
> > > scsibus2 at vscsi0: 256 targets
> > > softraid0 at root
> > > scsibus3 at softraid0: 256 targets
> > > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
> > > sd1: 488126MB, 512 bytes/sector, 999682111 sectors
> > > root on sd1a (ff46b9ed41b27d65.a) swap on sd1b dump on sd1b
> > > inteldrm0: 1366x768, 32bpp
> > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using
> > > wskbd0
> > > wsdisplay0: screen 1-5 added (std, vt100 emulation)
> > > iwm0: hw rev 0x140, fw ver 17.3216344376.0, address cc:3d:82:8a:6e:25
> >
>
