On Tue, Sep 29, 2026 at 09:00:00PM -0400, Josh Grosse wrote:
> On Tue, Sep 29, 2026 at 05:19:56PM -0700, Mike Larkin wrote:
> > On Sat, Sep 26, 2026 at 09:49:32AM -0400, Josh Grosse wrote:
> > > On Sat, Sep 26, 2026 at 09:32:04AM -0400, Josh Grosse wrote:
> > > > This began at some point after the vcpu enhancement.
> > >
> > > Adding the vm.conf. Guest is 7.9-release.
> > >
> > > ---
> > >
> > > files= /home/josh/vm/
> > >
> > > vm lab {
> > > disable
> > > owner josh
> > > memory 8g
> > > disk $files lab/disk.drive
> > > disk $files lab/releases/usr.ports.drive
> > > local interface tap0 rdomain 1 switch perm
> > > }
> > >
> > > switch perm {
> > > interface veb0 rdomain 1
> > > }
> > >
> > > ---
> > >
> > > > # vmd -dvvvvv output, and dmesg follow.
> > > >
> > > > ---
> > > >
> >
> > can't reproduce this locally with i386 7.9 original release nor the latest
> > syspatch kernel. tried mp and up.
> >
> > can you run strings on the guest kernel inside the vm disk and tell me what
> > build it is?
> >
> > -ml
>
> OpenBSD
> GENERIC#329
> @(#)OpenBSD 7.9 (GENERIC) #329: Wed May 6 14:56:46 MDT 2026
> OpenBSD 7.9 (GENERIC) #329: Wed May 6 14:56:46 MDT 2026
> [email protected]:/usr/src/sys/arch/i386/compile/GENERIC
>
still can't repro this and I even dug out an ancient haswell machine like
yours from the garage and ran the exact same kernel (although KARL likely
means we have different .o layouts, the bug below shouldn't be due to that).
when exactly does this happen? right at boot? some other time?
if its reproducible, see if you can find a way to share the kernel that
is failing. I have a vmd here with extra debug that might point to the source.
-ml
> >
> > > > vmd: startup
> > > > vmd: vm_register: registering vm 1
> > > > vmd: /etc/vm.conf:11: vm "lab" registered (disabled)
> > > > vmd: /etc/vm.conf:15: switch "perm" registered
> > > > vmd: vm_priv_brconfig: interface veb0 rdomain 1
> > > > vmd: vm_priv_brconfig: interface veb0 description switch1-perm
> > > > vmd: vmd_configure: setting staggered start configuration to
> > > > parallelism: 4 and delay: 30
> > > > vmd: vmd_configure: starting vms in staggered fashion
> > > > vmd: start_vm_batch: starting batch of 4 vms
> > > > vmd: start_vm_batch: not starting vm lab (disabled)
> > > > vmd: start_vm_batch: done starting vms
> > > > priv: config_getconfig: priv retrieving config
> > > > control: config_getconfig: control retrieving config
> > > > vmm: config_getconfig: vmm retrieving config
> > > > agentx: config_getconfig: agentx retrieving config
> > > > vmd: vm_opentty: vm lab tty /dev/ttyp1 uid 1000 gid 4 mode 620
> > > > vmm: vm_register: registering vm 1
> > > > vmd: vm_priv_ifconfig: interface tap0 description vm1-if0-lab
> > > > vmd: vm_priv_ifconfig: switch "perm" interface veb0 add tap0
> > > > vmd: vm_priv_ifconfig: interface tap0 rdomain 1
> > > > vmd: vm_priv_ifconfig: interface tap0 address 100.64.1.2/31
> > > > vmd: started lab (vm 1) successfully, tty /dev/ttyp1
> > > > vm/lab: loadfile_bios: loaded BIOS image
> > > > vm/lab: mmio_dev_add: added mmio handler for range [0xf0000000 -
> > > > 0xffbfffff]
> > > > vm/lab: mmio_dev_add: added mmio handler for range [0xfec00000 -
> > > > 0xfec0ffff]
> > > > vm/lab: mmio_dev_add: added mmio handler for range [0xfee00000 -
> > > > 0xfee00fff]
> > > > vm/lab: acpi_init: initializing acpi tables
> > > > vm/lab: acpi_init: DSDT loaded successfully (523 bytes)
> > > > vm/lab: acpi_create_facs: writing FACS to efff4000
> > > > vm/lab: acpi_create_fadt: creating FADT
> > > > vm/lab: acpi_create_fadt: FADT size 268
> > > > vm/lab: acpi_create_fadt: DSDT pointer 0xefff3000 / 0x0
> > > > vm/lab: acpi_create_fadt: writing FADT to efff2000
> > > > vm/lab: acpi_create_fadt: FADT creation complete
> > > > vm/lab: acpi_init: FADT created pointing to DSDT
> > > > vm/lab: acpi_create_madt: creating MADT
> > > > vm/lab: acpi_create_madt: MADT size 64
> > > > vm/lab: acpi_create_madt: computed MADT checksum 0x70
> > > > vm/lab: acpi_create_madt: writing MADT to efff1000
> > > > vm/lab: acpi_create_madt: MADT creation complete
> > > > vm/lab: acpi_create_xsdt: creating XSDT
> > > > vm/lab: acpi_create_xsdt: XSDT size 52
> > > > vm/lab: acpi_create_xsdt: writing XSDT to efff0000
> > > > vm/lab: acpi_create_xsdt: XSDT creation complete
> > > > vm/lab: acpi_create_rsdp: creating RSDP
> > > > vm/lab: acpi_create_rsdp: writing RSDP to 9d000
> > > > vm/lab: acpi_create_rsdp: RSDP creation complete
> > > > vm/lab: acpi_init: writing RSDP pointer 0x9d00 -> 0x40e
> > > > vm/lab: pic_set_elcr: setting level triggered mode for irq 3
> > > > vm/lab: pic_set_elcr: setting level triggered mode for irq 5
> > > > vm/lab: virtio_init: vm "lab" vio0 lladdr fe:e1:bb:d1:e0:2d, local
> > > > vm/lab: pic_set_elcr: setting level triggered mode for irq 6
> > > > vm/lab: pic_set_elcr: setting level triggered mode for irq 7
> > > > vm/lab: lab: launching vioblk1
> > > > priv: SIOCAIFADDR: Device busy
> > > > vm/lab: virtio_dev_launch: sending 'd' type device struct
> > > > vm/lab: virtio_dev_launch: sending vm message for 'lab'
> > > > vm/lab/vioblk: vioblk_main: got viblk dev. num disk fds = 1, sync fd =
> > > > 17, async fd = 19, capacity = 0 seg_max = 126, vm fd = 3
> > > > vm/lab/vioblk1: vioblk_main: initialized vioblk1 with raw image
> > > > (capacity=10485760)
> > > > vm/lab/vioblk1: vioblk_main: wiring in async vm event handler (fd=19)
> > > > vm/lab/vioblk1: vm_device_pipe: initializing 'd' device pipe (fd=19)
> > > > vm/lab/vioblk1: vioblk_main: wiring in sync channel handler (fd=17)
> > > > vm/lab/vioblk1: vioblk_main: telling vm lab device is ready
> > > > vm/lab/vioblk1: vioblk_main: sending heartbeat
> > > > vm/lab: virtio_dev_launch: device reports ready via sync channel
> > > > vm/lab: vm_device_pipe: initializing 'd' device pipe (fd=18)
> > > > vm/lab: lab: launching vioblk0
> > > > vm/lab: virtio_dev_launch: sending 'd' type device struct
> > > > vm/lab: virtio_dev_launch: sending vm message for 'lab'
> > > > vm/lab/vioblk: vioblk_main: got viblk dev. num disk fds = 1, sync fd =
> > > > 17, async fd = 20, capacity = 0 seg_max = 126, vm fd = 3
> > > > vm/lab/vioblk0: vioblk_main: initialized vioblk0 with raw image
> > > > (capacity=62914560)
> > > > vm/lab/vioblk0: vioblk_main: wiring in async vm event handler (fd=20)
> > > > vm/lab/vioblk0: vm_device_pipe: initializing 'd' device pipe (fd=20)
> > > > vm/lab/vioblk0: vioblk_main: wiring in sync channel handler (fd=17)
> > > > vm/lab/vioblk0: vioblk_main: telling vm lab device is ready
> > > > vm/lab/vioblk0: vioblk_main: sending heartbeat
> > > > vm/lab: virtio_dev_launch: device reports ready via sync channel
> > > > vm/lab: vm_device_pipe: initializing 'd' device pipe (fd=19)
> > > > vm/lab: lab: launching vionet0
> > > > vm/lab: virtio_dev_launch: sending 'n' type device struct
> > > > vm/lab: virtio_dev_launch: sending vm message for 'lab'
> > > > vm/lab/vionet: vionet_main: got vionet dev. tap fd = 9, syncfd = 17,
> > > > asyncfd = 21, vm fd = 3
> > > > vm/lab/vionet0: vionet_main: wiring in async vm event handler (fd=21)
> > > > vm/lab/vionet0: vm_device_pipe: initializing 'n' device pipe (fd=21)
> > > > vm/lab/vionet0: vionet_main: wiring in sync channel handler (fd=17)
> > > > vm/lab/vionet0: vionet_main: telling vm lab device is ready
> > > > vm/lab/vionet0: vionet_main: sending async ready message
> > > > vm/lab: virtio_dev_launch: device reports ready via sync channel
> > > > vm/lab: vm_device_pipe: initializing 'n' device pipe (fd=20)
> > > > vm/lab: pic_set_elcr: setting level triggered mode for irq 9
> > > > vm/lab: run_vm: starting 1 vcpu thread(s) for vm lab
> > > > vm/lab: vcpu_reset: resetting vcpu 0
> > > > vm/lab: run_vm: waiting on events for VM lab
> > > > vm/lab: lab: received tap addr fe:e1:ba:d3:49:aa for nic 0
> > > > vm/lab: handle_dev_msg: device reports ready
> > > > vm/lab: handle_dev_msg: device reports ready
> > > > vm/lab: handle_dev_msg: device reports ready
> > > > vm/lab/vionet0: dev_dispatch_vm: set hostmac
> > > > vm/lab: vcpu_exit_fw_cfg: selector 0x0000
> > > > vm/lab: vcpu_exit_fw_cfg: selector 0x0001
> > > > vm/lab: fw_cfg_handle_dma: selector 0x0019
> > > > vm/lab: fw_cfg_file_dir: file directory with 4 files
> > > > vm/lab: 36B 0020 etc/acpi/rsdp
> > > > vm/lab: 128B 0021 etc/table-loader
> > > > vm/lab: 120B 0022 etc/e820
> > > > vm/lab: 4B 0023 etc/screen-and-debug
> > > > vm/lab: vcpu_exit_fw_cfg: selector 0x0022
> > > > vm/lab: fw_cfg_select_file: accessing file etc/e820
> > > > vm/lab: fw_cfg_handle_dma: selector 0x000d
> > > > vm/lab: fw_cfg_select: unhandled selector d
> > > > vm/lab: fw_cfg_handle_dma: selector 0x000f
> > > > vm/lab: fw_cfg_handle_dma: selector 0x8000
> > > > vm/lab: fw_cfg_select: unhandled selector 8000
> > > > vm/lab: fw_cfg_handle_dma: selector 0x8001
> > > > vm/lab: fw_cfg_select: unhandled selector 8001
> > > > vm/lab: fw_cfg_handle_dma: selector 0x0019
> > > > vm/lab: fw_cfg_file_dir: file directory with 4 files
> > > > vm/lab: 36B 0020 etc/acpi/rsdp
> > > > vm/lab: 128B 0021 etc/table-loader
> > > > vm/lab: 120B 0022 etc/e820
> > > > vm/lab: 4B 0023 etc/screen-and-debug
> > > > vm/lab: fw_cfg_handle_dma: selector 0x0004
> > > > vm/lab: i8259_write_datareg: master pic, reset IRQ vector to 0x8
> > > > vm/lab: i8259_write_datareg: slave pic, reset IRQ vector to 0x70
> > > > vm/lab: fw_cfg_handle_dma: selector 0x000f
> > > > vm/lab: fw_cfg_handle_dma: selector 0x0005
> > > > vm/lab: translate_gva: unpaged, va=pa=0xf600f
> > > > vm/lab: translate_gva: unpaged, va=pa=0xf6017
> > > > vm/lab: translate_gva: unpaged, va=pa=0xf601c
> > > > vm/lab: translate_gva: unpaged, va=pa=0xf6026
> > > > vm/lab: translate_gva: unpaged, va=pa=0xf603a
> > > > vm/lab: translate_gva: unpaged, va=pa=0xf6044
> > > > vm/lab: fw_cfg_handle_dma: selector 0x0005
> > > > vm/lab: fw_cfg_handle_dma: selector 0x0021
> > > > vm/lab: fw_cfg_select_file: accessing file etc/table-loader
> > > > vm/lab: fw_cfg_handle_dma: selector 0x0020
> > > > vm/lab: fw_cfg_select_file: accessing file etc/acpi/rsdp
> > > > vm/lab: fw_cfg_handle_dma: selector 0x0023
> > > > vm/lab: fw_cfg_select_file: accessing file etc/screen-and-debug
> > > > vm/lab: vcpu_process_com_lcr: set baudrate = 115200
> > > > vm/lab: vcpu_process_com_lcr: set baudrate = 115200
> > > > vm/lab: vcpu_process_com_lcr: set baudrate = 115200
> > > > vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
> > > > vm/lab: i8259_write_datareg: master pic, reset IRQ vector to 0x20
> > > > vm/lab: i8259_write_datareg: slave pic, reset IRQ vector to 0x28
> > > > vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
> > > > vm/lab: vcpu_process_com_lcr: set baudrate = 115200
> > > > vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
> > > > vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
> > > > vm/lab: vcpu_process_com_lcr: set baudrate = 115200
> > > > vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
> > > > vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
> > > > vmd: vmd_dispatch_vmm: running vm: 1, vm_state: 0x3
> > > > vm/lab: vcpu_exit_eptviolation: instruction might cross page boundary
> > > > vm/lab: virtio_shutdown: waiting on device pid 50277
> > > > vm/lab/vionet0: rx_run_loop: exiting (0)
> > > > vm/lab/vionet0: tx_run_loop: exiting (0)
> > > > vm/lab: virtio_shutdown: device for pid 50277 is stopped
> > > > vm/lab: virtio_shutdown: waiting on device pid 78826
> > > > vm/lab: virtio_shutdown: device for pid 78826 is stopped
> > > > vm/lab: virtio_shutdown: waiting on device pid 7508
> > > > vm/lab: virtio_shutdown: device for pid 7508 is stopped
> > > > vmm: vmm_sighdlr: handling signal 20
> > > > vmm: vmm_sighdlr: vm lab exited (id 1)
> > > > vmm: vm_remove: vmm vmm_sighdlr removing vm 1 from running config
> > > > vmm: vm_stop: vmm vmm_sighdlr stopping vm 1
> > > > vmd: vm_stop: vmd vmd_dispatch_vmm stopping vm 1
> > > > vmd: vmd_dispatch_vmm: vm: 1, vm_state: 0x2
> > > > vmd: vmd_sighdlr: handling signal
> > > > vmd: vmd_shutdown: performing shutdown
> > > > vmd: vm_remove: vmd vmd_shutdown removing vm 1 from running config
> > > > vmm: vmm exiting, pid 24049
> > > > vmd: vm_stop: vmd vmd_shutdown stopping vm 1
> > > > priv: priv exiting, pid 94500
> > > > control: control exiting, pid 42958
> > > > agentx: agentx exiting, pid 130
> > > > vmd: terminating
> > > >
> > > > ---
> > > >
> > > > OpenBSD 8.0-beta (GENERIC.MP) #57: Sat Sep 26 00:32:32 MDT 2026
> > > > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > > > real mem = 17034862592 (16245MB)
> > > > avail mem = 16494858240 (15730MB)
> > > > random: good seed from bootblocks
> > > > mpath0 at root
> > > > scsibus0 at mpath0: 256 targets
> > > > mainbus0 at root
> > > > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xbcd2d000 (66 entries)
> > > > bios0: vendor LENOVO version "GMET91WW (2.39 )" date 06/03/2021
> > > > bios0: LENOVO 20BE00BTUS
> > > > efi0 at bios0: UEFI 2.3.1
> > > > efi0: Lenovo rev 0x2390
> > > > acpi0 at bios0: ACPI 5.0
> > > > acpi0: sleep states S0 S3 S4 S5
> > > > acpi0: tables DSDT FACP SLIC DBGP ECDT HPET APIC MCFG SSDT SSDT SSDT
> > > > SSDT SSDT SSDT SSDT PCCT SSDT TCPA UEFI MSDM ASF! BATB FPDT UEFI BGRT
> > > > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) EXP3(S4)
> > > > XHCI(S3) EHC1(S3) EHC2(S3)
> > > > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > > > acpiec0 at acpi0
> > > > acpihpet0 at acpi0: 14318179 Hz
> > > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > > > cpu0 at mainbus0: apid 0 (boot processor)
> > > > cpu0: Intel(R) Core(TM) i5-4210M CPU @ 2.60GHz, 2594.03 MHz, 06-3c-03,
> > > > patch 00000028
> > > > cpu0: cpuid 1
> > > > edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> > > >
> > > > ecx=77dafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
> > > > cpu0: cpuid 6 eax=77<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
> > > > cpu0: cpuid 7.0
> > > > ebx=27ab<FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID>
> > > > edx=9c000600<SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD>
> > > > cpu0: cpuid a vers=3, gp=4, gpwidth=48, ff=3, ffwidth=48
> > > > cpu0: cpuid d.1 eax=1<XSAVEOPT>
> > > > cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG>
> > > > ecx=21<LAHF,ABM>
> > > > cpu0: cpuid 80000007 edx=100<ITSC>
> > > > cpu0: MELTDOWN
> > > > cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB
> > > > 64b/line 8-way L2 cache, 3MB 64b/line 12-way L3 cache
> > > > cpu0: smt 0, core 0, package 0, type P
> > > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> > > > cpu0: apic clock running at 99MHz
> > > > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
> > > > cpu1 at mainbus0: apid 1 (application processor)
> > > > cpu1: Intel(R) Core(TM) i5-4210M CPU @ 2.60GHz, 2594.02 MHz, 06-3c-03,
> > > > patch 00000028
> > > > cpu1: smt 1, core 0, package 0, type SP
> > > > cpu2 at mainbus0: apid 2 (application processor)
> > > > cpu2: Intel(R) Core(TM) i5-4210M CPU @ 2.60GHz, 2594.03 MHz, 06-3c-03,
> > > > patch 00000028
> > > > cpu2: smt 0, core 1, package 0, type P
> > > > cpu3 at mainbus0: apid 3 (application processor)
> > > > cpu3: Intel(R) Core(TM) i5-4210M CPU @ 2.60GHz, 2594.08 MHz, 06-3c-03,
> > > > patch 00000028
> > > > cpu3: smt 1, core 1, package 0, type SP
> > > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> > > > acpimcfg0 at acpi0
> > > > acpimcfg0: addr 0xf8000000, bus 0-63
> > > > acpiprt0 at acpi0: bus 0 (PCI0)
> > > > acpiprt1 at acpi0: bus -1 (PEG_)
> > > > acpiprt2 at acpi0: bus 3 (EXP1)
> > > > acpiprt3 at acpi0: bus 4 (EXP2)
> > > > acpiprt4 at acpi0: bus 5 (EXP3)
> > > > acpiprt5 at acpi0: bus -1 (EXP6)
> > > > acpibtn0 at acpi0: LID_(wakeup)
> > > > acpibtn1 at acpi0: SLPB(wakeup)
> > > > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> > > > acpicmos0 at acpi0
> > > > "LEN0071" at acpi0 not configured
> > > > "LEN0034" at acpi0 not configured
> > > > tpm0 at acpi0 TPM_ 1.2 (TIS) addr 0xfed40000/0x5000, device 0x0000104a
> > > > rev 0x4e
> > > > acpibat0 at acpi0: BAT0 model "45N1769" serial 3053 type LION oem
> > > > "SANYO"
> > > > acpiac0 at acpi0: AC unit online
> > > > acpithinkpad0 at acpi0: version 1.0
> > > > "PNP0C14" at acpi0 not configured
> > > > "PNP0C14" at acpi0 not configured
> > > > "PNP0C14" at acpi0 not configured
> > > > "INT340F" at acpi0 not configured
> > > > acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
> > > > acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
> > > > acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
> > > > acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
> > > > acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2
> > > > acpipwrres1 at acpi0: NVP3, resource for PEG_
> > > > acpipwrres2 at acpi0: NVP2, resource for PEG_
> > > > acpitz0 at acpi0
> > > > acpitz0: critical temperature is 200 degC
> > > > acpivideo0 at acpi0: VID_
> > > > acpivout0 at acpivideo0: LCD0
> > > > acpivideo1 at acpi0: VID_
> > > > cpu0: using VERW MDS workaround (except on vmm entry)
> > > > cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2300,
> > > > 2200, 2100, 2000, 1800, 1700, 1600, 1400, 1300, 1200, 1100, 900, 800 MHz
> > > > pci0 at mainbus0 bus 0
> > > > pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x06
> > > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4600" rev 0x06
> > > > drm0 at inteldrm0
> > > > inteldrm0: msi, HASWELL, gen 7
> > > > azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x06: msi
> > > > azalia0: No codecs found
> > > > xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi,
> > > > xHCI 1.0
> > > > usb0 at xhci0: USB revision 3.0
> > > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> > > > 3.00/1.00 addr 1
> > > > "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> > > > em0 at pci0 dev 25 function 0 "Intel I217-LM" rev 0x04: msi, address
> > > > 54:ee:75:63:2d:55
> > > > ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x04: apic 2
> > > > int 16
> > > > usb1 at ehci0: USB revision 2.0
> > > > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> > > > 2.00/1.00 addr 1
> > > > azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04:
> > > > msi
> > > > azalia1: codecs: Realtek ALC292
> > > > audio0 at azalia1
> > > > ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd4: msi
> > > > pci1 at ppb0 bus 3
> > > > rtsx0 at pci1 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01:
> > > > msi
> > > > sdmmc0 at rtsx0: 4-bit, dma
> > > > ppb1 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xd4: msi
> > > > pci2 at ppb1 bus 4
> > > > iwm0 at pci2 dev 0 function 0 "Intel AC 7260" rev 0x6b, msi
> > > > ppb2 at pci0 dev 28 function 2 "Intel 8 Series PCIE" rev 0xd4: msi
> > > > pci3 at ppb2 bus 5
> > > > ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2
> > > > int 23
> > > > usb2 at ehci1: USB revision 2.0
> > > > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
> > > > 2.00/1.00 addr 1
> > > > pcib0 at pci0 dev 31 function 0 "Intel QM87 LPC" rev 0x04
> > > > ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi,
> > > > AHCI 1.3
> > > > ahci0: port 0: 6.0Gb/s
> > > > ahci0: port 5: 1.5Gb/s
> > > > scsibus1 at ahci0: 32 targets
> > > > sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7LN512, MVT0>
> > > > naa.5002538d005dbce6
> > > > sd0: 488386MB, 512 bytes/sector, 1000215216 sectors, thin
> > > > cd0 at scsibus1 targ 5 lun 0: <MATSHITA, DVD-RAM UJ8G2, 1.00> removable
> > > > ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic
> > > > 2 int 18
> > > > iic0 at ichiic0
> > > > isa0 at pcib0
> > > > isadma0 at isa0
> > > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > > > pckbd0 at pckbc0 (kbd slot)
> > > > wskbd0 at pckbd0: console keyboard
> > > > pms0 at pckbc0 (aux slot)
> > > > wsmouse0 at pms0 mux 0
> > > > wsmouse1 at pms0 mux 0
> > > > pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300 0x2d9440
> > > > 0xd001a3 0x12f800
> > > > pcppi0 at isa0 port 0x61
> > > > spkr0 at pcppi0
> > > > vmm0 at mainbus0: VMX/EPT
> > > > efifb at mainbus0 not configured
> > > > iwm0: restrict all mbufs to low memory
> > > > uvideo0 at uhub0 port 12 configuration 1 interface 0 "SunplusIT INC.
> > > > Integrated Camera" rev 2.00/26.03 addr 2
> > > > video0 at uvideo0
> > > > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
> > > > Hub" rev 2.00/0.04 addr 2
> > > > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
> > > > Hub" rev 2.00/0.04 addr 2
> > > > sdmmc0: can't enable card
> > > > vscsi0 at root
> > > > scsibus2 at vscsi0: 256 targets
> > > > softraid0 at root
> > > > scsibus3 at softraid0: 256 targets
> > > > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
> > > > sd1: 488126MB, 512 bytes/sector, 999682111 sectors
> > > > root on sd1a (ff46b9ed41b27d65.a) swap on sd1b dump on sd1b
> > > > inteldrm0: 1366x768, 32bpp
> > > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using
> > > > wskbd0
> > > > wsdisplay0: screen 1-5 added (std, vt100 emulation)
> > > > iwm0: hw rev 0x140, fw ver 17.3216344376.0, address cc:3d:82:8a:6e:25
> > >
> >
>
