bugs  

Messages by Thread

• RTEMS | bsps/shared/gpio: Resolve assert build issues (!1248) Kinsey Moore (@opticron)
  • Re: RTEMS | bsps/shared/gpio: Resolve assert build issues (!1248) Kinsey Moore (@opticron)
• RTEMS | smpopenmp01 is a benchmark (#5579) Gedare Bloom (@gedare)
  • Re: RTEMS | smpopenmp01 is a benchmark (#5579) Gedare Bloom (@gedare)
• RTEMS | ts-validation-intr assumes UINT32_MAX is an invalid interrupt priority (#5578) Gedare Bloom (@gedare)
  • Re: RTEMS | ts-validation-intr assumes UINT32_MAX is an invalid interrupt priority (#5578) Gedare Bloom (@gedare)
• RTEMS | smpmrsp01 intermittent failures (#5577) Gedare Bloom (@gedare)
  • Re: RTEMS | smpmrsp01 intermittent failures (#5577) Gedare Bloom (@gedare)
  • Re: RTEMS | smpmrsp01 intermittent failures (#5577) Gedare Bloom (@gedare)
• RTEMS | smptests/smpclock01: slow down the tick rate (!1247) Gedare Bloom (@gedare)
  • Re: RTEMS | smptests/smpclock01: slow down the tick rate (!1247) Gedare Bloom (@gedare)
  • Re: RTEMS | smptests/smpclock01: slow down the tick rate (!1247) Gedare Bloom (@gedare)
• RTEMS | testsuites/validation: check exactly for unset priority (!1246) Gedare Bloom (@gedare)
  • Re: RTEMS | testsuites/validation: check exactly for unset priority (!1246) Gedare Bloom (@gedare)
  • Re: RTEMS | testsuites/validation: check exactly for unset priority (!1246) Kinsey Moore (@opticron)
• Central | rtems/intr: check exactly for unset priority (!19) Gedare Bloom (@gedare)
• Re: Documentation | Document copying uboot env on qoriq for MVME2500 (#136) Ran Hong (@hongran86)
• Re: RTEMS | New build configuration option RTEMS_QUALIFIED (#4963) Kinsey Moore (@opticron)
• Re: RTEMS | Test issue for attachment testing (#5004) Kinsey Moore (@opticron)
• Re: RTEMS | GCC 13.2.0 fails to build qemu-xilinx (#4988) Kinsey Moore (@opticron)
  • Re: RTEMS | GCC 13.2.0 fails to build qemu-xilinx (#4988) Kinsey Moore (@opticron)
• Re: RTEMS | QEMU 5.2.0 configure does not resolve gdbus_codegen correctly (#4987) Kinsey Moore (@opticron)
  • Re: RTEMS | QEMU 5.2.0 configure does not resolve gdbus_codegen correctly (#4987) Kinsey Moore (@opticron)
• Central | tc-inter-get-priority assumes default priority is less than PRIORITY_UNSET (#18) Gedare Bloom (@gedare)
• Central | IRQ maximum priority is poorly specified/tested (#17) Gedare Bloom (@gedare)
  • Re: Central | IRQ maximum priority is poorly specified/tested (#17) Gedare Bloom (@gedare)
• Re: RTEMS | Eliminate use of __ppc_generic and other PowerPC model defines in BSP configure.ac (#3431) Kinsey Moore (@opticron)
  • Re: RTEMS | Eliminate use of __ppc_generic and other PowerPC model defines in BSP configure.ac (#3431) Kinsey Moore (@opticron)
• Re: RTEMS | Multiple references to autoconf build system left in documentation (#4130) Kinsey Moore (@opticron)
• Re: RTEMS | Quick Start 2.6 Not working for me and some tests failing for sparc-rtems6 (#4188) Kinsey Moore (@opticron)
  • Re: RTEMS | Quick Start 2.6 Not working for me and some tests failing for sparc-rtems6 (#4188) Kinsey Moore (@opticron)
• Re: RTEMS | libio rename file system handler interface does not pass the from name (#4268) Kinsey Moore (@opticron)
  • Re: RTEMS | libio rename file system handler interface does not pass the from name (#4268) Joel Sherrill (@joel)
• Re: RTEMS | Update QuickStart 2.4 for git install (#4187) Kinsey Moore (@opticron)
  • Re: RTEMS | Update QuickStart 2.4 for git install (#4187) Kinsey Moore (@opticron)
• Re: RTEMS | devel/qemu is not buildable on Mac OS X. (#4570) Kinsey Moore (@opticron)
  • Re: RTEMS | devel/qemu is not buildable on Mac OS X. (#4570) Joel Sherrill (@joel)
  • Re: RTEMS | devel/qemu is not buildable on Mac OS X. (#4570) Kinsey Moore (@opticron)
• Re: RTEMS | Can't build ATSAM BSP (#4773) Kinsey Moore (@opticron)
  • Re: RTEMS | Can't build ATSAM BSP (#4773) Kinsey Moore (@opticron)
• Re: RTEMS | Issue building stack using RTEMS quick start guide (#4825) Kinsey Moore (@opticron)
  • Re: RTEMS | Issue building stack using RTEMS quick start guide (#4825) Kinsey Moore (@opticron)
• Re: RTEMS | Defect: devel/qemu does not build (#4890) Kinsey Moore (@opticron)
  • Re: RTEMS | Defect: devel/qemu does not build (#4890) Jacob Killelea (@jkillelea)
  • Re: RTEMS | Defect: devel/qemu does not build (#4890) Kinsey Moore (@opticron)
• Re: RTEMS | Runtime symbols loading is broken (#5236) Kinsey Moore (@opticron)
  • Re: RTEMS | Runtime symbols loading is broken (#5236) Kinsey Moore (@opticron)
• Re: RTEMS | Remove Mongoose Web Server (#5367) Kinsey Moore (@opticron)
  • Re: RTEMS | Remove Mongoose Web Server (#5367) Kinsey Moore (@opticron)
• Re: RTEMS | Backport to 6 branch "bsps/qspi: Make flashdev control structure private" (#5375) Kinsey Moore (@opticron)
  • Re: RTEMS | Backport to 6 branch "bsps/qspi: Make flashdev control structure private" (#5375) Kinsey Moore (@opticron)
• Re: RTEMS | Back port fix for flashdev JFFS2 double free of mount_data and instance to `6` (#5382) Kinsey Moore (@opticron)
  • Re: RTEMS | Back port fix for flashdev JFFS2 double free of mount_data and instance to `6` (#5382) Kinsey Moore (@opticron)
• Re: RTEMS | Add -D_LDBL_EQ_DBL=1 workaround to ABI_FLAGS on Coldfires (#5435) Kinsey Moore (@opticron)
  • Re: RTEMS | Add -D_LDBL_EQ_DBL=1 workaround to ABI_FLAGS on Coldfires (#5435) Kinsey Moore (@opticron)
• RTEMS Source Builder | sb: Back port main to the 6 branch (!254) Chris Johns (@chris)
  • Re: RTEMS Source Builder | sb: Back port main to the 6 branch (!254) Chris Johns (@chris)
  • Re: RTEMS Source Builder | sb: Back port main to the 6 branch (!254) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | sb: Back port main to the 6 branch (!254) Joel Sherrill (@joel)
  • Re: RTEMS Source Builder | sb: Back port main to the 6 branch (!254) Chris Johns (@chris)
• RTEMS Source Builder | Back port main source-builder to the 6 branch (#184) Chris Johns (@chris)
• RTEMS Source Builder | config: Move GCC 15 and HEAD to their own backend files (!253) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | config: Move GCC 15 and HEAD to their own backend files (!253) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | config: Move GCC 15 and HEAD to their own backend files (!253) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | config: Move GCC 15 and HEAD to their own backend files (!253) Chris Johns (@chris)
• SIS | sis does not compile with late model compilers (#5) Joel Sherrill (@joel)
  • Re: SIS | sis does not compile with late model compilers (#5) Kinsey Moore (@opticron)
• Re: SIS | Improve sis command line help (#1) Joel Sherrill (@joel)
  • Re: SIS | Improve sis command line help (#1) Joel Sherrill (@joel)
• Re: RTEMS Source Builder | source-builder/config: check for meson in pixman (!216) Chris Johns (@chris)
  • Re: RTEMS Source Builder | source-builder/config: check for meson in pixman (!216) Chris Johns (@chris)
  • Re: RTEMS Source Builder | source-builder/config: check for meson in pixman (!216) Gedare Bloom (@gedare)
  • Re: RTEMS Source Builder | source-builder/config: check for meson in pixman (!216) Gedare Bloom (@gedare)
  • Re: RTEMS Source Builder | source-builder/config: check for meson in pixman (!216) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | source-builder/config: check for meson in pixman (!216) Chris Johns (@chris)
• RTEMS Source Builder | sb/download: Remove patchwork support (!252) Chris Johns (@chris)
  • Re: RTEMS Source Builder | sb/download: Remove patchwork support (!252) Chris Johns (@chris)
  • Re: RTEMS Source Builder | sb/download: Remove patchwork support (!252) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | sb/download: Remove patchwork support (!252) Kinsey Moore (@opticron)
• RTEMS Source Builder | sb/version: Do not check versions when getting source (!251) Chris Johns (@chris)
  • Re: RTEMS Source Builder | sb/version: Do not check versions when getting source (!251) Chris Johns (@chris)
  • Re: RTEMS Source Builder | sb/version: Do not check versions when getting source (!251) Kinsey Moore (@opticron)
• RTEMS Source Builder | Various fixes from main (!250) Chris Johns (@chris)
  • Re: RTEMS Source Builder | Various fixes from main (!250) Chris Johns (@chris)
  • Re: RTEMS Source Builder | Various fixes from main (!250) Chris Johns (@chris)
  • Re: RTEMS Source Builder | Various fixes from main (!250) Chris Johns (@chris)
  • Re: RTEMS Source Builder | Various fixes from main (!250) Chris Johns (@chris)
  • Re: RTEMS Source Builder | Various fixes from main (!250) Chris Johns (@chris)
• RTEMS Source Builder | Speed up for get sources in versions.cfg (#183) Chris Johns (@chris)
  • Re: RTEMS Source Builder | Speed up for get sources in versions.cfg (#183) Kinsey Moore (@opticron)
• RTEMS Source Builder | Speed up for get sources in versions.cfg (#182) Chris Johns (@chris)
  • Re: RTEMS Source Builder | Speed up for get sources in versions.cfg (#182) Chris Johns (@chris)
• RTEMS Source Builder | RTEMS 5 GCC 9.3.0 build config has an SHA256 hash on sed patch (#181) Chris Johns (@chris)
  • Re: RTEMS Source Builder | RTEMS 5 GCC 9.3.0 build config has an SHA256 hash on sed patch (#181) Chris Johns (@chris)
• RTEMS Tools | tester/qemu: add icount to qemu_opts_base (!87) Gedare Bloom (@gedare)
  • Re: RTEMS Tools | tester/qemu: add icount to qemu_opts_base (!87) Gedare Bloom (@gedare)
  • Re: RTEMS Tools | tester/qemu: add icount to qemu_opts_base (!87) Kinsey Moore (@opticron)
  • Re: RTEMS Tools | tester/qemu: add icount to qemu_opts_base (!87) Gedare Bloom (@gedare)
  • Re: RTEMS Tools | tester/qemu: add icount to qemu_opts_base (!87) Gedare Bloom (@gedare)
  • Re: RTEMS Tools | tester/qemu: add icount to qemu_opts_base (!87) Gedare Bloom (@gedare)
  • Re: RTEMS Tools | tester/qemu: add icount to qemu_opts_base (!87) Gedare Bloom (@gedare)
  • Re: RTEMS Tools | tester/qemu: add icount to qemu_opts_base (!87) Kinsey Moore (@opticron)
  • Re: RTEMS Tools | tester/qemu: add icount to qemu_opts_base (!87) Gedare Bloom (@gedare)
  • Re: RTEMS Tools | tester/qemu: add icount to qemu_opts_base (!87) Kinsey Moore (@opticron)
• RTEMS | riscv: clock driver may fall behind (#5576) Gedare Bloom (@gedare)
  • Re: RTEMS | riscv: clock driver may fall behind (#5576) Kinsey Moore (@opticron)
• RTEMS | testsuites: fix usage of rtems_test_spin_for_ticks (!1245) Gedare Bloom (@gedare)
  • Re: RTEMS | testsuites: fix usage of rtems_test_spin_for_ticks (!1245) Gedare Bloom (@gedare)
  • Re: RTEMS | testsuites: fix usage of rtems_test_spin_for_ticks (!1245) Kinsey Moore (@opticron)
  • Re: RTEMS | testsuites: fix usage of rtems_test_spin_for_ticks (!1245) Kinsey Moore (@opticron)
  • Re: RTEMS | testsuites: fix usage of rtems_test_spin_for_ticks (!1245) Kinsey Moore (@opticron)
• RTEMS | rtems_test_spin_for_ticks() fails to execute a minimum workload (#5575) Gedare Bloom (@gedare)
  • Re: RTEMS | rtems_test_spin_for_ticks() fails to execute a minimum workload (#5575) Gedare Bloom (@gedare)
  • Re: RTEMS | rtems_test_spin_for_ticks() fails to execute a minimum workload (#5575) Kinsey Moore (@opticron)
• Re: RTEMS | Output value not assigned (#4830) Gedare Bloom (@gedare)
• RTEMS Source Builder | sis-2-1.cfg: Define host_c_std as GNU17 (!249) Joel Sherrill (@joel)
  • Re: RTEMS Source Builder | sis-2-1.cfg: Define host_c_std as GNU17 (!249) Kinsey Moore (@opticron)
• RTEMS Source Builder | sis-2-1.cfg: Define host_c_std as GNU17 (!248) Joel Sherrill (@joel)
  • Re: RTEMS Source Builder | sis-2-1.cfg: Define host_c_std as GNU17 (!248) Joel Sherrill (@joel)
  • Re: RTEMS Source Builder | sis-2-1.cfg: Define host_c_std as GNU17 (!248) Kinsey Moore (@opticron)
• RTEMS Source Builder | sis-2-1.cfg: Define host_c_std as GNU17 (!247) Joel Sherrill (@joel)
  • Re: RTEMS Source Builder | sis-2-1.cfg: Define host_c_std as GNU17 (!247) Joel Sherrill (@joel)
  • Re: RTEMS Source Builder | sis-2-1.cfg: Define host_c_std as GNU17 (!247) Kinsey Moore (@opticron)
• RTEMS | style(9): white space after ; and around binary operators (!1244) Sebastian Huber (@sebhub)
  • Re: RTEMS | style(9): white space after ; and around binary operators (!1244) Sebastian Huber (@sebhub)
  • Re: RTEMS | style(9): white space after ; and around binary operators (!1244) Sebastian Huber (@sebhub)
  • Re: RTEMS | style(9): white space after ; and around binary operators (!1244) Amar Takhar (@amar)
• RTEMS | iospace: Add iospace driver (!1243) Aaron Nyholm (@eagleirony)
  • Re: RTEMS | iospace: Add iospace driver (!1243) Aaron Nyholm (@eagleirony)
  • Re: RTEMS | iospace: Add iospace driver (!1243) Kinsey Moore (@opticron)
  • Re: RTEMS | iospace: Add iospace driver (!1243) Kinsey Moore (@opticron)
  • Re: RTEMS | iospace: Add iospace driver (!1243) Aaron Nyholm (@eagleirony)
  • Re: RTEMS | iospace: Add iospace driver (!1243) Kinsey Moore (@opticron)
  • Re: RTEMS | iospace: Add iospace driver (!1243) Kinsey Moore (@opticron)
  • Re: RTEMS | iospace: Add iospace driver (!1243) Aaron Nyholm (@eagleirony)
  • Re: RTEMS | iospace: Add iospace driver (!1243) Kinsey Moore (@opticron)
  • Re: RTEMS | iospace: Add iospace driver (!1243) Gedare Bloom (@gedare)
  • Re: RTEMS | iospace: Add iospace driver (!1243) Gedare Bloom (@gedare)
  • Re: RTEMS | iospace: Add iospace driver (!1243) Gedare Bloom (@gedare)
  • Re: RTEMS | iospace: Add iospace driver (!1243) Gedare Bloom (@gedare)
• RTEMS Source Builder | Remove any patchworks download support (#180) Chris Johns (@chris)
  • Re: RTEMS Source Builder | Remove any patchworks download support (#180) Chris Johns (@chris)
• RTEMS Source Builder | Remove any patchworks download support (#179) Chris Johns (@chris)
  • Re: RTEMS Source Builder | Remove any patchworks download support (#179) Kinsey Moore (@opticron)
• RTEMS Source Builder | Update `qemu` to the version on `main` (#178) Chris Johns (@chris)
  • Re: RTEMS Source Builder | Update `qemu` to the version on `main` (#178) Chris Johns (@chris)
• RTEMS | bsp/aarch64/zynqmp_apu: build issue with xqspipsu (#5574) Aaron Nyholm (@eagleirony)
  • Re: RTEMS | bsp/aarch64/zynqmp_apu: build issue with xqspipsu (#5574) Kinsey Moore (@opticron)
  • Re: RTEMS | bsp/aarch64/zynqmp_apu: build issue with xqspipsu (#5574) Kinsey Moore (@opticron)
  • Re: RTEMS | bsp/aarch64/zynqmp_apu: build issue with xqspipsu (#5574) Aaron Nyholm (@eagleirony)
  • Re: RTEMS | bsp/aarch64/zynqmp_apu: build issue with xqspipsu (#5574) Aaron Nyholm (@eagleirony)
• RTEMS Source Builder | sb/defaults: Add C and C++ standard option support for packages (!246) Chris Johns (@chris)
  • Re: RTEMS Source Builder | sb/defaults: Add C and C++ standard option support for packages (!246) Chris Johns (@chris)
  • Re: RTEMS Source Builder | sb/defaults: Add C and C++ standard option support for packages (!246) Chris Johns (@chris)
• RTEMS Source Builder | source-builder: Backport changes from main (!245) Chris Johns (@chris)
  • Re: RTEMS Source Builder | source-builder: Backport changes from main (!245) Chris Johns (@chris)
  • Re: RTEMS Source Builder | source-builder: Backport changes from main (!245) Chris Johns (@chris)
  • Re: RTEMS Source Builder | source-builder: Backport changes from main (!245) Chris Johns (@chris)
• RTEMS Source Builder | Add config/gcc-15.cfg and config/gcc-16.cfg (#177) Chris Johns (@chris)
  • Re: RTEMS Source Builder | Add config/gcc-15.cfg and config/gcc-16.cfg (#177) Chris Johns (@chris)
• RTEMS Source Builder | Add C and C++ standard option support for packages (#176) Chris Johns (@chris)
  • Re: RTEMS Source Builder | Add C and C++ standard option support for packages (#176) Chris Johns (@chris)
• RTEMS | riscv: enable using PLIC in S-mode (!1242) Gedare Bloom (@gedare)
  • Re: RTEMS | riscv: enable using PLIC in S-mode (!1242) Gedare Bloom (@gedare)
  • Re: RTEMS | riscv: enable using PLIC in S-mode (!1242) Gedare Bloom (@gedare)
  • Re: RTEMS | riscv: enable using PLIC in S-mode (!1242) Kinsey Moore (@opticron)
  • Re: RTEMS | riscv: enable using PLIC in S-mode (!1242) Gedare Bloom (@gedare)
  • Re: RTEMS | riscv: enable using PLIC in S-mode (!1242) Gedare Bloom (@gedare)
  • Re: RTEMS | riscv: enable using PLIC in S-mode (!1242) Kinsey Moore (@opticron)
  • Re: RTEMS | riscv: enable using PLIC in S-mode (!1242) Gedare Bloom (@gedare)
  • Re: RTEMS | riscv: enable using PLIC in S-mode (!1242) Gedare Bloom (@gedare)
  • Re: RTEMS | riscv: enable using PLIC in S-mode (!1242) Gedare Bloom (@gedare)
  • Re: RTEMS | riscv: enable using PLIC in S-mode (!1242) Kinsey Moore (@opticron)
• RTEMS Source Builder | Source downloading is broken when VERSION is present on 5 (#175) Chris Johns (@chris)
• LibBSD | VFS: Fix reference and buffer bugs (!140) Aaron Nyholm (@eagleirony)
  • Re: LibBSD | VFS: Fix reference and buffer bugs (!140) Chris Johns (@chris)
  • Re: LibBSD | VFS: Fix reference and buffer bugs (!140) Kinsey Moore (@opticron)
• RTEMS | Set environment variables from MOTLoad GEV data (#5573) Chris Johns (@chris)
• RTEMS | libmisc/shell: Add -a to print all vars in the shell getenv command (!1241) Chris Johns (@chris)
  • Re: RTEMS | libmisc/shell: Add -a to print all vars in the shell getenv command (!1241) Chris Johns (@chris)
  • Re: RTEMS | libmisc/shell: Add -a to print all vars in the shell getenv command (!1241) Kinsey Moore (@opticron)
  • Re: RTEMS | libmisc/shell: Add -a to print all vars in the shell getenv command (!1241) Chris Johns (@chris)
  • Re: RTEMS | libmisc/shell: Add -a to print all vars in the shell getenv command (!1241) Kinsey Moore (@opticron)
  • Re: RTEMS | libmisc/shell: Add -a to print all vars in the shell getenv command (!1241) Chris Johns (@chris)
  • Re: RTEMS | libmisc/shell: Add -a to print all vars in the shell getenv command (!1241) Chris Johns (@chris)
  • Re: RTEMS | libmisc/shell: Add -a to print all vars in the shell getenv command (!1241) Chris Johns (@chris)
  • Re: RTEMS | libmisc/shell: Add -a to print all vars in the shell getenv command (!1241) Chris Johns (@chris)
• Re: RTEMS | rtems: add _clang-format files for LLVM (!965) Chris Johns (@chris)
  • Re: RTEMS | rtems: add _clang-format files for LLVM (!965) Amar Takhar (@amar)
  • Re: RTEMS | rtems: add _clang-format files for LLVM (!965) Amar Takhar (@amar)
  • Re: RTEMS | rtems: add _clang-format files for LLVM (!965) Gedare Bloom (@gedare)
• RTEMS | Print all environment variables with the shell getenv command (#5572) Chris Johns (@chris)
  • Re: RTEMS | Print all environment variables with the shell getenv command (#5572) Chris Johns (@chris)
• Google Summer of Code | tracking: Add GSoC blog link for Ning Zhang (!324) Ning Zhang (@River)
  • Re: Google Summer of Code | tracking: Add GSoC blog link for Ning Zhang (!324) Kinsey Moore (@opticron)
• RTEMS | cpukit/dev/can: fail controller init if worker task start doesn't start (!1240) Michal Lenc (@michallenc)
  • Re: RTEMS | cpukit/dev/can: fail controller init if worker task start doesn't start (!1240) Michal Lenc (@michallenc)
  • Re: RTEMS | cpukit/dev/can: fail controller init if worker task start doesn't start (!1240) Gedare Bloom (@gedare)
  • Re: RTEMS | cpukit/dev/can: fail controller init if worker task start doesn't start (!1240) Kinsey Moore (@opticron)
• RTEMS | riscv: add helper functions (!1239) Gedare Bloom (@gedare)

• Earlier messages