Damjan Jovanovic wrote:

> 
> The ATA at 10.9.10.72 does not re-INVITE us to T.38 like it should. Fax
> goes over ulaw and fails.
> 
> Try to send a fax from the ATA through Callweaver going out the ISDN and
> see what happens.
> 
> The sound also seems too soft in one direction, try adjusting the tx/rx
> gain.
> 
> Good luck
> Damjan
> 
It seems that the ATA invokes T38 with NSE info. Change it to reINvite.

Best regards

Hans
> On Fri, 2008-03-28 at 10:17 +0100, Marek Zelem wrote:
>>      Hi
>>
>>   My yesterday's message is waiting for moderator because I attached logs.
>> I am sending it again without logs. Originally attached files can be found
>> at:
>>      http://marek.terminus.sk/cw/callweaver_incoming_fax.tcpdump.gz
>>      http://marek.terminus.sk/cw/full.gz
>>
>> Here is text of the message:
>>
>>      Hi again
>>
>>  I am sending requested logs and tcpdump.
>>
>> I did exactly following:
>>      1. Start Callweaver with full loging
>>      2. Via CLI I set everything stated on the wiki
>>      3. Start tcpdump
>>      4. I sent fax from outside to ISDN number.
>> fax machine outside ---> ISDN ---> USB ISDN adapter ---> chan_capi --->
>>    ---> T38Gateway(SIP/oldfax) ---> SIP ATA with T38 ---> Faxmodem
>>      5. Stop tcpdump
>>      6. Stop Callweaver
>>
>> Fax transmission was not successful.
>>
>> If anything else is needed, please tell me what can I do.
>>
>> BTW, I have asterisk installed on the same machine (not running during
>> this test) with almost same configuration. I observe that callweaver seems
>> to me somehow maybe slower. When I do voice call through asterisk it is
>> smooth and clear but the same call through callweaver is not so clear, it
>> seems like not all packets arived on time or so. It is just subjective
>> feeling. I will try to measure it more exactly. Just wondering whether it
>> can be related to reliability of t38 fax.
>>
>> Please let me know if you need me to test anything.
>>
>> Thanks in advance
>>
>> Marek
>>
>> On Thu, 27 Mar 2008, Max CtRiX wrote:
>>
>>> Marek Zelem ha scritto:
>>>
>>>> Can you please tell me what I am doing wrong?
>>>>
>>> No,
>>> not without any log.
>>> Info on what's needed is in the wiki.
>>>
>>> Max
>>> _______________________________________________
>>> Callweaver-users mailing list
>>> [email protected]
>>> http://lists.callweaver.org/mailman/listinfo/callweaver-users
>>>
>>>
>>
>>                                      Marek Zelem
>> --
>>   e-mail: [EMAIL PROTECTED]
>>   web: http://marek.terminus.sk/
>>   pgp key: http://marek.terminus.sk/gpg.txt
>> _______________________________________________
>> Callweaver-users mailing list
>> [email protected]
>> http://lists.callweaver.org/mailman/listinfo/callweaver-users
> 
> _______________________________________________
> Callweaver-users mailing list
> [email protected]
> http://lists.callweaver.org/mailman/listinfo/callweaver-users
> 
> 

_______________________________________________
Callweaver-users mailing list
[email protected]
http://lists.callweaver.org/mailman/listinfo/callweaver-users

Reply via email to