We're running 10MHz channels almost everywhere for the same reason. UBNT M365 everywhere in the lower 25MHz. And some of it is ours which we're still slowing getting rid of.
We have wind turbines here in IL as well. Ken Hohhof talks about them a lot. If you're trying to shoot an SM through 2-3 or more of the turbines/blades, things get a little weird. I have a 12 mile 11GHz path going through one of the wind farms and I see the MSE fluctuate quite a bit, maybe 4-5dB. But that was also an old used set of Trango radios that I'm not too sure about. Has been working for about a year now though. On 10/10/2017 3:10 PM, Mike Scott wrote: > What size channels are you operating? We were first set up with 10 Mhz on > each of our 4 PMP450 Cambium AP's. > Cambium says we need to expand to at least 20 Mhz channels to increase > throughput - on the 3.65. > Our 20 meg SM customers are noticing their Internet speed slowing down as > daily traffic increases. > Have a wireless competitor who is on the lower 25 and we're on the upper > 25Mhz and little if any elbow room to expand. > FCC serious about expanding 3.65? > > > > Off topic a tad.... > Here in NW Iowa, the wind turbines are taking off big time. > New units are 212 ft high and will be 170 new towers with three 80ft blades > operating in our area we provide rural Internet to. > Anyone expecting or dealing with the same scenarios? > Affect signal, etc. when they operate? > > Mike Scott > > > > -----Original Message----- > From: cambium-users-boun...@wispa.org > [mailto:cambium-users-boun...@wispa.org] On Behalf Of George Skorup > Sent: Monday, October 09, 2017 5:03 PM > To: Cambium Networks User Group <cambium-users@wispa.org> > Subject: [Cambium-users] cnMaestro speed test > > Scenario 1: customer says they're not getting their speed. We run a link test > and of course it looks fine. We check backhaul links and they look fine. > > Scenario 2: cnPilot managed wifi customer says an AP doesn't seem to be > working very good. Internal radio links (if any) or switch ports look fine. > > It would be nice to be able to use cnMaestro as a speed test end-point to the > SM, cnPilot AP, etc. PMP or ePMP APs wouldn't be a bad idea either. > _______________________________________________ > Cambium-users mailing list > Cambium-users@wispa.org > http://lists.wispa.org/mailman/listinfo/cambium-users > _______________________________________________ > Cambium-users mailing list > Cambium-users@wispa.org > http://lists.wispa.org/mailman/listinfo/cambium-users _______________________________________________ Cambium-users mailing list Cambium-users@wispa.org http://lists.wispa.org/mailman/listinfo/cambium-users
