We use 12.04 + 14.7 without issues here at Penn.
Brad Dober Ph.D. Candidate Department of Physics and Astronomy University of Pennsylvania Cell: 262-949-4668 On Tue, Jun 23, 2015 at 4:07 PM, Jack Hickish <jackhick...@gmail.com> wrote: > Hi Victor, > > I strongly recommend using Xilinx's 14.7 release. Some people use Ubuntu > 12.04 -- see > https://casper.berkeley.edu/wiki/MSSGE_Setup_with_Xilinx_14.x_and_Matlab_2012b > -- but as Dan says, life might be easier with a supported operating > system... > > Cheers, > Jack > > On Tue, 23 Jun 2015 at 13:01 Dan Werthimer <d...@ssl.berkeley.edu> wrote: > >> >> >> hi victor, >> >> i urge people to only use operating systems supported by xilinx: >> i think right now, that means >> windows7 pro, redhat enterprise linux 5 or 6, or suse enterprise linux. >> >> several casperites have tried to use non-supported linux operating >> systems for casper work. >> sometimes this can work fine for particular appliciations, sometimes it >> doesn't work. >> >> xilinx will not provide any support or answer any questions if you use a >> non-supported operating system. and we've seen be subtle bugs >> without any reported error messages with a non-supported operating system. >> one time we found the casper FFT didn't work for sizes over 2^13 points - >> there was no >> error message - it just computed the FFT incorrectly on the FPGA - the >> simulation >> worked fine... when we switched to redhat, the problem went away... >> >> best wishes, >> >> dan >> >> >> >> >> On Tue, Jun 23, 2015 at 12:48 PM, Victor Cardoso < >> victorcardoso...@hotmail.com> wrote: >> >>> Greetings, >>> >>> I am working with the ROACH 2 in order to implement the MUSIC project. I >>> am having a lot of troubles to compile the Tutorial 1 (Introduction to >>> Simulink) due to mismatch between Xilinx ISE 14.5 and my Operating System, >>> Ubuntu 10.04. >>> I would like to know if it's possible to run this example using Ubuntu. >>> Otherwise, I can install Redhat Enterprise Linux 6.3, Matlab 12b and Xilinx >>> 14.5 to run the codes. >>> >>> I look forward hearing from you. >>> >>> Best Regards, >>> Victor Cardoso. >>> >> >>