Now that's my kind of sailor - 3 tons of boat, 3 tons of beer! Ken Amy Lynn II deltaville, va -------------- Original message -------------- From: "DaveBreski" <[EMAIL PROTECTED]>
I guess it might work for a day sailor but for a 6 ton C27 with all the rigging, etc. And with the mast up then youve got all that windage area to worry about getting blown over in a blow Ive seen that happen more than once. Personally, Id be a little leery of the whole set up. Seems like a lot of effort and risk to save on a gallon of bottom paint. But thats just my 2 cents. Dave Cape Cod, MA From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Joe McCary Sent: Wednesday, April 09, 2008 8:42 AM To: [email protected] Subject: RE: catalina27-talk: Dry Sailing a Catalina 27 When I say a lift, I mean a frame that sinks below the floating boat that is then winched (electrical winch) up clear of the water. My source of the lift suggests that I do not need to support the keel, instead just let it hand below and support the hull. He suggested that I use a pair of carpeted rails that run almost the length of the boat and mostly under the boat to support it and let the keel hang in the open air. Joe McCary Aeolus II, West River, MD [EMAIL PROTECTED] From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Sneddon, Keith Sent: Wednesday, April 09, 2008 8:17 AM To: [email protected] Subject: RE: catalina27-talk: Dry Sailing a Catalina 27 My take is that the cradle for drysailing is going to need to be incredibly wide and stout. When you trailer, the mast is down. When you say lift, do you mean hoist, or one of those floating things? Keith Sneddon From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, April 08, 2008 9:45 PM To: [email protected] Subject: Re: catalina27-talk: Dry Sailing a Catalina 27 Joe, call Catalina for cradle info. They sent me one when I was inquiring about trailering. It was specifically for the C-27 that had all the dimensions for the factory cradle. The one I had is no where to be found. Jeff -----Original Message----- From: Joe McCary <[EMAIL PROTECTED]> To: [email protected] Sent: Tue, 8 Apr 2008 1:23 pm Subject: catalina27-talk: Dry Sailing a Catalina 27 I am considering getting a lift for the Catalina 27. This would allow me to dry sail the boat and not to worry with bottom paint. A neighbor has one and we are negotiating on the price. My question here is how would I best rig a cradle to hold the hoisted boat? Any suggestions as to size and dimensions or shape would be appreciated. Actual plans might be a good idea if anyone has them. Does anyone know of a Catalina 27 that is hoisted on a lift in this manner? Joe McCary Aeolus II, West River, MD [EMAIL PROTECTED] Get the MapQuest Toolbar, Maps, Traffic, Directions & More!
