like this DataCentre_2#sh version Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12.2(25)EWA7, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2006 by Cisco Systems, Inc. Compiled Mon 16-Oct-06 18:23 by dchih Image text-base: 0x10000000, data-base: 0x114EEE78
ROM: 12.2(20r)EW1 Dagobah Revision 226, Swamp Revision 5 DataCentre_2 uptime is 21 minutes System returned to ROM by reload Running default software cisco WS-C4948 (MPC8245) processor (revision 0) with 262144K bytes of memory. Processor board ID FOX10450KV2 MPC8245 CPU at 266Mhz, Fixed Module Last reset from Reload 1 Virtual Ethernet interface 48 Gigabit Ethernet interfaces 511K bytes of non-volatile configuration memory. Configuration register is 0x2102 DataCentre_2# 2008/2/21, Masood Ahmad Shah <[EMAIL PROTECTED]>: > > I wonder your register settings might be wrong.. What you get if you do … > > > > Swtich# sh version > > > > Regards, > > Masood Ahmad Shah > > > > > > *From:* Ali Aydemir [mailto:[EMAIL PROTECTED] > *Sent:* Thursday, February 21, 2008 4:55 PM > *To:* Masood Ahmad Shah > *Cc:* [email protected] > *Subject:* Re: [OSL | CCIE_RS] boot problem on 4948 SW > > > > > Thanks your advise but "no boot manual" not in usuable command list > > DataCentre_2(config)#no boot ? > bootldr Boot loader (RxBoot) image name > bootstrap Bootstrap image file > host Router-specific config file > network Network-wide config file > system System image file > > DataCentre_2(config)# > > > and i use > > DataCentre_2(config)#boot system flash cat4000-i9s-mz.122-25.EWA7.bin > > but same propblem. Switch is boot on rommon.. > > if that is any mean > > > > > **************************************************************************************************************************************************** > rommon 2 >? > alias set and display aliases command > boot boot up an external process > clear clear configurations, use 'clear help' for more info > confreg configuration register utility > dev list the device table with physical device information > dir list filesystem information > help monitor builtin command help > history monitor command history > macstats print management port MAC statistics counters > meminfo main memory information > ping ping utility to determine network connectivity > repeat repeat a monitor command > reset system reset > set show/set environment vars, use 'set help' for more > info > sprom serial eprom operations > sysret print out info from last system return > unalias unset an alias > unset unset a monitor variable > version display Rom Monitor version information > rommon 3 >boot > > Rommon reg: 0xE2004180 > ########## > k2diags version 4.2.2_h > > prod: WS-C4948 part: 73-9130-08 serial: FOX10450KV2 > > > Power-on-self-test for Module 1: WS-C4948 > Port/Test Status: (. = Pass, F = Fail, U = Untested) > > > > Port Traffic: L2 Asic Loopback ... > 0: . 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: . > 12: . 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: . > 24: . 25: . 26: . 27: . 28: . 29: . 30: . 31: . 32: . 33: . 34: . 35: . > 36: . 37: . 38: . 39: . 40: . 41: . 42: . 43: . 44: . 45: . 46: . 47: . > > > Port Traffic: L3 Asic Loopback ... > 0: . 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: . > 12: . 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: . > 24: . 25: . 26: . 27: . 28: . 29: . 30: . 31: . 32: . 33: . 34: . 35: . > 36: . 37: . 38: . 39: . 40: . 41: . 42: . 43: . 44: . 45: . 46: . 47: . > > > Switch Subsystem Memory ... > 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: . 12: . > 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: . 24: . > 25: . 26: . 27: . 28: . 29: . 30: . 31: . 32: . 33: . 34: . 35: . 36: . > 37: . 38: . 39: . 40: . 41: . 42: . 43: . 44: . 45: . 46: . 47: . 48: . > 49: . 50: . 51: . 52: . 53: . 54: . 55: . > > > Front Panel Ports ... > 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: . 12: . > 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: . 24: . > 25: . 26: . 27: . 28: . 29: . 30: . 31: . 32: . 33: . 34: . 35: . 36: . > 37: . 38: . 39: . 40: . 41: . 42: . 43: . 44: . 45: . 46: . 47: . 48: . > > > Module 1 Passed > > > Exiting to ios... > > Rommon reg: 0xE2000180 > ################################### > Restricted Rights Legend > > Use, duplication, or disclosure by the Government is > subject to restrictions as set forth in subparagraph > (c) of the Commercial Computer Software - Restricted > Rights clause at FAR sec. 52.227-19 and subparagraph > (c) (1) (ii) of the Rights in Technical Data and Computer > Software clause at DFARS sec. 252.227-7013. > > cisco Systems, Inc. > 170 West Tasman Drive > San Jose, California 95134-1706 > > > > Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9S-M), > Version 12.2(25)EWA7, RELEASE SOFTWARE (fc1) > Technical Support: http://www.cisco.com/techsupport > Copyright (c) 1986-2006 by Cisco Systems, Inc. > Compiled Mon 16-Oct-06 18:23 by dchih > Image text-base: 0x10000000, data-base: 0x114EEE78 > > cisco WS-C4948 (MPC8245) processor (revision 0) with 262144K bytes of > memory. > Processor board ID FOX10450KV2 > MPC8245 CPU at 266Mhz, Fixed Module > Last reset from Reload > 1 Virtual Ethernet interface > 48 Gigabit Ethernet interfaces > 511K bytes of non-volatile configuration memory. > > Uncompressed configuration from 1893 bytes to 5178 bytes > > > Press RETURN to get started! > > > 00:00:15: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan > 00:00:17: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 1 (WS-C4948 S/N: > FOX10450KV2 Hw: 1.4) is online > 000003: 00:00:17: %SYS-6-CLOCKUPDATE: System clock has been updated from > 03:27:40 UTC Thu Feb 21 2008 to 05:27:40 UTC Thu Feb 21 2008, configured > from console by console. > 000004: 00:00:17: %SYS-6-CLOCKUPDATE: System clock has been updated from > 05:27:40 UTC Thu Feb 21 2008 to 05:27:40 UTC Thu Feb 21 2008, configured > from console by console. > 000005: 00:00:17: %SYS-5-CONFIG_I: Configured from memory by console > 000006: 00:00:18: %SYS-5-RESTART: System restarted -- > Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9S-M), > Version 12.2(25)EWA7, RELEASE SOFTWARE (fc1) > Technical Support: http://www.cisco.com/techsupport > Copyright (c) 1986-2006 by Cisco Systems, Inc. > Compiled Mon 16-Oct-06 18:23 by dchih > DataCentre_2>en > DataCentre_2>enable > DataCentre_2# > > **************************************************************************************************************************************************** > > > > thanks. > > > > > > 2008/2/21, Masood Ahmad Shah <[EMAIL PROTECTED]>: > > You may need to check boot variable. > > > > This might solve your problem……. > > > > Jahil-1(config)# no boot manual > > > > Regards, > > Masood Ahmad Shah > > > > > > *From:* [EMAIL PROTECTED] [mailto: > [EMAIL PROTECTED] *On Behalf Of *Ali Aydemir > *Sent:* Thursday, February 21, 2008 1:06 PM > *To:* [email protected] > *Subject:* [OSL | CCIE_RS] boot problem on 4948 SW > > > > > That switch boot on rommon every startup.. we dont understand why. > > Thanks for suggestions. > > > > > ************************************************************************************************************************************************************************ > > > DataCentre_1#sh version > Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9S-M), > Version 12.2(25)EWA7, RELEASE SOFTWARE (fc1) > Technical Support: http://www.cisco.com/techsupport > Copyright (c) 1986-2006 by Cisco Systems, Inc. > Compiled Mon 16-Oct-06 18:23 by dchih > Image text-base: 0x10000000, data-base: 0x114EEE78 > > ROM: 12.2(20r)EW1 > Dagobah Revision 226, Swamp Revision 5 > > DataCentre_1 uptime is 1 week, 5 days, 8 hours, 42 minutes > System returned to ROM by power-on > System image file is "bootflash:cat4000-i9s-mz.122-25.EWA7.bin" > > cisco WS-C4948 (MPC8245) processor (revision 0) with 262144K bytes of > memory. > Processor board ID FOX10450KVG > MPC8245 CPU at 266Mhz, Fixed Module > Last reset from PowerUp > 1 Virtual Ethernet interface > 48 Gigabit Ethernet interfaces > 511K bytes of non-volatile configuration memory. > > Configuration register is 0x2102 > > > > > ************************************************************************************************************************************************************************ > > > DataCentre_1#sh runn > Building configuration... > > Current configuration : 5504 bytes > ! > version 12.2 > no service pad > service timestamps debug uptime > service timestamps log uptime > no service password-encryption > service compress-config > service sequence-numbers > ! > hostname DataCentre_1 > ! > boot-start-marker > boot-end-marker > ! > ! > username admin privilege 15 secret 5 $1$9GCt$lq3FGtMluCZMmoU1gQeZE1 > no aaa new-model > clock timezone UTC 2 > clock summer-time UTC recurring last Sun Mar 3:00 last Sun Oct 4:00 > ip subnet-zero > no ip domain-lookup > ip domain-name belbim.local > ip name-server 192.168.100.35 > ! > ! > no file verify auto > spanning-tree mode pvst > spanning-tree extend system-id > power redundancy-mode redundant > ! > ! > ! > vlan internal allocation policy ascending > ! > interface GigabitEthernet1/1 > switchport access vlan 3 > switchport mode access > spanning-tree portfast > ! > interface GigabitEthernet1/2 > switchport access vlan 3 > switchport mode access > ! > interface GigabitEthernet1/3 > switchport access vlan 23 > switchport mode access > spanning-tree portfast > ! > interface GigabitEthernet1/4 > switchport access vlan 11 > switchport mode access > spanning-tree portfast > . > . > . > . > . > > > ************************************************************************************************************************************************************************ > > >
