Thanks your advise but "no boot manual" not in usuable command list
DataCentre_2(config)#no boot ?
bootldr Boot loader (RxBoot) image name
bootstrap Bootstrap image file
host Router-specific config file
network Network-wide config file
system System image file
DataCentre_2(config)#
and i use
DataCentre_2(config)#boot system flash cat4000-i9s-mz.122-25.EWA7.bin
but same propblem. Switch is boot on rommon..
if that is any mean
****************************************************************************************************************************************************
rommon 2 >?
alias set and display aliases command
boot boot up an external process
clear clear configurations, use 'clear help' for more info
confreg configuration register utility
dev list the device table with physical device information
dir list filesystem information
help monitor builtin command help
history monitor command history
macstats print management port MAC statistics counters
meminfo main memory information
ping ping utility to determine network connectivity
repeat repeat a monitor command
reset system reset
set show/set environment vars, use 'set help' for more info
sprom serial eprom operations
sysret print out info from last system return
unalias unset an alias
unset unset a monitor variable
version display Rom Monitor version information
rommon 3 >boot
Rommon reg: 0xE2004180
##########
k2diags version 4.2.2_h
prod: WS-C4948 part: 73-9130-08 serial: FOX10450KV2
Power-on-self-test for Module 1: WS-C4948
Port/Test Status: (. = Pass, F = Fail, U = Untested)
Port Traffic: L2 Asic Loopback ...
0: . 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: .
12: . 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: .
24: . 25: . 26: . 27: . 28: . 29: . 30: . 31: . 32: . 33: . 34: . 35: .
36: . 37: . 38: . 39: . 40: . 41: . 42: . 43: . 44: . 45: . 46: . 47: .
Port Traffic: L3 Asic Loopback ...
0: . 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: .
12: . 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: .
24: . 25: . 26: . 27: . 28: . 29: . 30: . 31: . 32: . 33: . 34: . 35: .
36: . 37: . 38: . 39: . 40: . 41: . 42: . 43: . 44: . 45: . 46: . 47: .
Switch Subsystem Memory ...
1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: . 12: .
13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: . 24: .
25: . 26: . 27: . 28: . 29: . 30: . 31: . 32: . 33: . 34: . 35: . 36: .
37: . 38: . 39: . 40: . 41: . 42: . 43: . 44: . 45: . 46: . 47: . 48: .
49: . 50: . 51: . 52: . 53: . 54: . 55: .
Front Panel Ports ...
1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: . 12: .
13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: . 24: .
25: . 26: . 27: . 28: . 29: . 30: . 31: . 32: . 33: . 34: . 35: . 36: .
37: . 38: . 39: . 40: . 41: . 42: . 43: . 44: . 45: . 46: . 47: . 48: .
Module 1 Passed
Exiting to ios...
Rommon reg: 0xE2000180
###################################
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9S-M),
Version 12.2(25)EWA7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 16-Oct-06 18:23 by dchih
Image text-base: 0x10000000, data-base: 0x114EEE78
cisco WS-C4948 (MPC8245) processor (revision 0) with 262144K bytes of
memory.
Processor board ID FOX10450KV2
MPC8245 CPU at 266Mhz, Fixed Module
Last reset from Reload
1 Virtual Ethernet interface
48 Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Uncompressed configuration from 1893 bytes to 5178 bytes
Press RETURN to get started!
00:00:15: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
00:00:17: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 1 (WS-C4948 S/N:
FOX10450KV2 Hw: 1.4) is online
000003: 00:00:17: %SYS-6-CLOCKUPDATE: System clock has been updated from
03:27:40 UTC Thu Feb 21 2008 to 05:27:40 UTC Thu Feb 21 2008, configured
from console by console.
000004: 00:00:17: %SYS-6-CLOCKUPDATE: System clock has been updated from
05:27:40 UTC Thu Feb 21 2008 to 05:27:40 UTC Thu Feb 21 2008, configured
from console by console.
000005: 00:00:17: %SYS-5-CONFIG_I: Configured from memory by console
000006: 00:00:18: %SYS-5-RESTART: System restarted --
Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9S-M),
Version 12.2(25)EWA7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 16-Oct-06 18:23 by dchih
DataCentre_2>en
DataCentre_2>enable
DataCentre_2#
****************************************************************************************************************************************************
thanks.
2008/2/21, Masood Ahmad Shah <[EMAIL PROTECTED]>:
>
> You may need to check boot variable.
>
>
>
> This might solve your problem…….
>
>
>
> Jahil-1(config)# no boot manual
>
>
>
> Regards,
>
> Masood Ahmad Shah
>
>
>
>
>
> *From:* [EMAIL PROTECTED] [mailto:
> [EMAIL PROTECTED] *On Behalf Of *Ali Aydemir
> *Sent:* Thursday, February 21, 2008 1:06 PM
> *To:* [email protected]
> *Subject:* [OSL | CCIE_RS] boot problem on 4948 SW
>
>
>
>
> That switch boot on rommon every startup.. we dont understand why.
>
> Thanks for suggestions.
>
>
>
>
> ************************************************************************************************************************************************************************
>
>
> DataCentre_1#sh version
> Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9S-M),
> Version 12.2(25)EWA7, RELEASE SOFTWARE (fc1)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2006 by Cisco Systems, Inc.
> Compiled Mon 16-Oct-06 18:23 by dchih
> Image text-base: 0x10000000, data-base: 0x114EEE78
>
> ROM: 12.2(20r)EW1
> Dagobah Revision 226, Swamp Revision 5
>
> DataCentre_1 uptime is 1 week, 5 days, 8 hours, 42 minutes
> System returned to ROM by power-on
> System image file is "bootflash:cat4000-i9s-mz.122-25.EWA7.bin"
>
> cisco WS-C4948 (MPC8245) processor (revision 0) with 262144K bytes of
> memory.
> Processor board ID FOX10450KVG
> MPC8245 CPU at 266Mhz, Fixed Module
> Last reset from PowerUp
> 1 Virtual Ethernet interface
> 48 Gigabit Ethernet interfaces
> 511K bytes of non-volatile configuration memory.
>
> Configuration register is 0x2102
>
>
>
>
> ************************************************************************************************************************************************************************
>
>
> DataCentre_1#sh runn
> Building configuration...
>
> Current configuration : 5504 bytes
> !
> version 12.2
> no service pad
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> service compress-config
> service sequence-numbers
> !
> hostname DataCentre_1
> !
> boot-start-marker
> boot-end-marker
> !
> !
> username admin privilege 15 secret 5 $1$9GCt$lq3FGtMluCZMmoU1gQeZE1
> no aaa new-model
> clock timezone UTC 2
> clock summer-time UTC recurring last Sun Mar 3:00 last Sun Oct 4:00
> ip subnet-zero
> no ip domain-lookup
> ip domain-name belbim.local
> ip name-server 192.168.100.35
> !
> !
> no file verify auto
> spanning-tree mode pvst
> spanning-tree extend system-id
> power redundancy-mode redundant
> !
> !
> !
> vlan internal allocation policy ascending
> !
> interface GigabitEthernet1/1
> switchport access vlan 3
> switchport mode access
> spanning-tree portfast
> !
> interface GigabitEthernet1/2
> switchport access vlan 3
> switchport mode access
> !
> interface GigabitEthernet1/3
> switchport access vlan 23
> switchport mode access
> spanning-tree portfast
> !
> interface GigabitEthernet1/4
> switchport access vlan 11
> switchport mode access
> spanning-tree portfast
> .
> .
> .
> .
> .
>
>
> ************************************************************************************************************************************************************************
>
