Could you share your entire configuration with us? I think that will make some stuff clear. --
Regards, Rick Mur CCIE2 #21946 (R&S / Service Provider) Sr. Support Engineer – IPexpert, Inc. URL: http://www.IPexpert.com On Fri, Sep 4, 2009 at 8:51 AM, cyrus riobah <[email protected]> wrote: > Armed > > How are the areas connected? Is area 687 directly connected to area 0? > > Could kindly attach your scenario with the diagram for clarification? > > Cyrus > > CCIE RnS (Written) > > On 9/2/09, Bryan Bartik <[email protected]> wrote: > > Ahmed, > > > > Looks like you have R6 and R2 in the same VLAN. Make sure you have your > > VLANs configured properly. > > > > On Tue, Sep 1, 2009 at 2:37 PM, Ahmed Haji Munye <[email protected]> > wrote: > > > >> > >> > >> Hi > >> > >> What is the solution and which routers do I need to change the area ID > and > >> how do I do it? > >> > >> Kind Regards > >> Ahmed > >> > >> --- Den *tis 2009-09-01 skrev prakash patel <[email protected]>*: > >> > >> > >> Från: prakash patel <[email protected]> > >> Ämne: RE: [OSL | CCIE_RS] backbone area must be virtual-link but not > found > >> from 150.100.12.2, FastEt > >> Till: [email protected], [email protected] > >> Datum: tisdag 1 september 2009 20.20 > >> > >> > >> mismatch area ID, > >> > >> ------------------------------ > >> Date: Tue, 1 Sep 2009 19:20:12 +0000 > >> From: [email protected] > >> To: [email protected] > >> Subject: [OSL | CCIE_RS] backbone area must be virtual-link but not > found > >> from 150.100.12.2, FastEt > >> > >> > >> I have started OSPF process ID 123 and put Area 0 on a frame-relay, > using > >> R2 is the hub, R5 and R6 are the spokes. I am using subnet > >> 150.100.100.0/24 on the Frame-relay. > >> > >> I have also started OSPF 123 between R2s Fa0/0 and R1s Fa0/0 putting > then > >> in Area 0. > >> > >> I do have neigbors and I can see the remote routes in each routing > table. > >> But the issue is that I am getting the ERROR message below in the blue > >> line when I start OSPF 123 on the 150.100.221.0/24 subnet putting it > into > >> area 678 > >> > >> 150.100.221.0/24 is directly connected to R7s fa0/0 > >> > >> R6(config-router)#network 150.100.221.0 0.0.0.255 area 678 > >> R6(config-router)# > >> *Sep 1 19:15:38.911: %OSPF-4-ERRRCV: Received invalid packet: mismatch > >> area ID, > >> from backbone area must be virtual-link but not found from > 150.100.12.2, > >> FastEt > >> hernet0/1 > >> > >> Please help me out. > >> > >> Kind Regards > >> Ahmed > >> > >> ------------------------------ > >> Låna pengar utan säkerhet. > >> Sök och jämför lån hos > >> Kelkoo.< > http://www.kelkoo.se/c-100390123-lan-utan-sakerhet.html?partnerId=96915014 > > > >> ------------------------------ > >> With Windows Live, you can organize, edit, and share your photos. Click > >> here. <http://www.windowslive.com/Desktop/PhotoGallery> > >> > >> > >> ------------------------------ > >> Ta semester! - sök efter resor hos Kelkoo. > >> Jämför pris på flygbiljetter och hotellrum: > >> http://www.kelkoo.se/c-169901-resor-biljetter.html< > http://www.kelkoo.se/c-169901-resor-biljetter.html?partnerId=96914051> > >> _______________________________________________ > >> For more information regarding industry leading CCIE Lab training, > please > >> visit www.ipexpert.com > >> > >> > > > > > > -- > > Bryan Bartik > > CCIE #23707 (R&S), CCNP > > Sr. Support Engineer - IPexpert, Inc. > > URL: http://www.IPexpert.com > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
