The mis-matched area packet is received on FastEhernet0/1 and it is from 150.100.12.2 (R2). This is likely because vlans haven't been configured to segment R6 and R2 from each other. This would be a nice troubleshooting scenario :)
On Fri, Sep 4, 2009 at 11:16 AM, Joe Astorino <[email protected]>wrote: > Yes, share the configs, but usually you will see this when you have only > one end of your virtual link configured. > > > On Fri, Sep 4, 2009 at 4:14 AM, Rick Mur <[email protected]> wrote: > >> Could you share your entire configuration with us? I think that will make >> some stuff clear. >> -- >> >> Regards, >> >> Rick Mur >> CCIE2 #21946 (R&S / Service Provider) >> Sr. Support Engineer – IPexpert, Inc. >> URL: http://www.IPexpert.com >> >> >> On Fri, Sep 4, 2009 at 8:51 AM, cyrus riobah <[email protected]> wrote: >> >>> Armed >>> >>> How are the areas connected? Is area 687 directly connected to area 0? >>> >>> Could kindly attach your scenario with the diagram for clarification? >>> >>> Cyrus >>> >>> CCIE RnS (Written) >>> >>> On 9/2/09, Bryan Bartik <[email protected]> wrote: >>> > Ahmed, >>> > >>> > Looks like you have R6 and R2 in the same VLAN. Make sure you have your >>> > VLANs configured properly. >>> > >>> > On Tue, Sep 1, 2009 at 2:37 PM, Ahmed Haji Munye <[email protected]> >>> wrote: >>> > >>> >> >>> >> >>> >> Hi >>> >> >>> >> What is the solution and which routers do I need to change the area ID >>> and >>> >> how do I do it? >>> >> >>> >> Kind Regards >>> >> Ahmed >>> >> >>> >> --- Den *tis 2009-09-01 skrev prakash patel <[email protected] >>> >*: >>> >> >>> >> >>> >> Från: prakash patel <[email protected]> >>> >> Ämne: RE: [OSL | CCIE_RS] backbone area must be virtual-link but not >>> found >>> >> from 150.100.12.2, FastEt >>> >> Till: [email protected], [email protected] >>> >> Datum: tisdag 1 september 2009 20.20 >>> >> >>> >> >>> >> mismatch area ID, >>> >> >>> >> ------------------------------ >>> >> Date: Tue, 1 Sep 2009 19:20:12 +0000 >>> >> From: [email protected] >>> >> To: [email protected] >>> >> Subject: [OSL | CCIE_RS] backbone area must be virtual-link but not >>> found >>> >> from 150.100.12.2, FastEt >>> >> >>> >> >>> >> I have started OSPF process ID 123 and put Area 0 on a frame-relay, >>> using >>> >> R2 is the hub, R5 and R6 are the spokes. I am using subnet >>> >> 150.100.100.0/24 on the Frame-relay. >>> >> >>> >> I have also started OSPF 123 between R2s Fa0/0 and R1s Fa0/0 putting >>> then >>> >> in Area 0. >>> >> >>> >> I do have neigbors and I can see the remote routes in each routing >>> table. >>> >> But the issue is that I am getting the ERROR message below in the blue >>> >> line when I start OSPF 123 on the 150.100.221.0/24 subnet putting it >>> into >>> >> area 678 >>> >> >>> >> 150.100.221.0/24 is directly connected to R7s fa0/0 >>> >> >>> >> R6(config-router)#network 150.100.221.0 0.0.0.255 area 678 >>> >> R6(config-router)# >>> >> *Sep 1 19:15:38.911: %OSPF-4-ERRRCV: Received invalid packet: >>> mismatch >>> >> area ID, >>> >> from backbone area must be virtual-link but not found from >>> 150.100.12.2, >>> >> FastEt >>> >> hernet0/1 >>> >> >>> >> Please help me out. >>> >> >>> >> Kind Regards >>> >> Ahmed >>> >> >>> >> ------------------------------ >>> >> Låna pengar utan säkerhet. >>> >> Sök och jämför lån hos >>> >> Kelkoo.< >>> http://www.kelkoo.se/c-100390123-lan-utan-sakerhet.html?partnerId=96915014 >>> > >>> >> ------------------------------ >>> >> With Windows Live, you can organize, edit, and share your photos. >>> Click >>> >> here. <http://www.windowslive.com/Desktop/PhotoGallery> >>> >> >>> >> >>> >> ------------------------------ >>> >> Ta semester! - sök efter resor hos Kelkoo. >>> >> Jämför pris på flygbiljetter och hotellrum: >>> >> http://www.kelkoo.se/c-169901-resor-biljetter.html< >>> http://www.kelkoo.se/c-169901-resor-biljetter.html?partnerId=96914051> >>> >> _______________________________________________ >>> >> For more information regarding industry leading CCIE Lab training, >>> please >>> >> visit www.ipexpert.com >>> >> >>> >> >>> > >>> > >>> > -- >>> > Bryan Bartik >>> > CCIE #23707 (R&S), CCNP >>> > Sr. Support Engineer - IPexpert, Inc. >>> > URL: http://www.IPexpert.com >>> > >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >>> >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> > > > -- > Regards, > > Joe Astorino - CCIE #24347 R&S > Technical Instructor - IPexpert, Inc. > Cell: +1.586.212.6107 > Fax: +1.810.454.0130 > Mailto: [email protected] > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > -- Bryan Bartik CCIE #23707 (R&S), CCNP Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
