Yes, share the configs, but usually you will see this when you have only one end of your virtual link configured.
On Fri, Sep 4, 2009 at 4:14 AM, Rick Mur <[email protected]> wrote: > Could you share your entire configuration with us? I think that will make > some stuff clear. > -- > > Regards, > > Rick Mur > CCIE2 #21946 (R&S / Service Provider) > Sr. Support Engineer – IPexpert, Inc. > URL: http://www.IPexpert.com > > > On Fri, Sep 4, 2009 at 8:51 AM, cyrus riobah <[email protected]> wrote: > >> Armed >> >> How are the areas connected? Is area 687 directly connected to area 0? >> >> Could kindly attach your scenario with the diagram for clarification? >> >> Cyrus >> >> CCIE RnS (Written) >> >> On 9/2/09, Bryan Bartik <[email protected]> wrote: >> > Ahmed, >> > >> > Looks like you have R6 and R2 in the same VLAN. Make sure you have your >> > VLANs configured properly. >> > >> > On Tue, Sep 1, 2009 at 2:37 PM, Ahmed Haji Munye <[email protected]> >> wrote: >> > >> >> >> >> >> >> Hi >> >> >> >> What is the solution and which routers do I need to change the area ID >> and >> >> how do I do it? >> >> >> >> Kind Regards >> >> Ahmed >> >> >> >> --- Den *tis 2009-09-01 skrev prakash patel <[email protected]>*: >> >> >> >> >> >> Från: prakash patel <[email protected]> >> >> Ämne: RE: [OSL | CCIE_RS] backbone area must be virtual-link but not >> found >> >> from 150.100.12.2, FastEt >> >> Till: [email protected], [email protected] >> >> Datum: tisdag 1 september 2009 20.20 >> >> >> >> >> >> mismatch area ID, >> >> >> >> ------------------------------ >> >> Date: Tue, 1 Sep 2009 19:20:12 +0000 >> >> From: [email protected] >> >> To: [email protected] >> >> Subject: [OSL | CCIE_RS] backbone area must be virtual-link but not >> found >> >> from 150.100.12.2, FastEt >> >> >> >> >> >> I have started OSPF process ID 123 and put Area 0 on a frame-relay, >> using >> >> R2 is the hub, R5 and R6 are the spokes. I am using subnet >> >> 150.100.100.0/24 on the Frame-relay. >> >> >> >> I have also started OSPF 123 between R2s Fa0/0 and R1s Fa0/0 putting >> then >> >> in Area 0. >> >> >> >> I do have neigbors and I can see the remote routes in each routing >> table. >> >> But the issue is that I am getting the ERROR message below in the blue >> >> line when I start OSPF 123 on the 150.100.221.0/24 subnet putting it >> into >> >> area 678 >> >> >> >> 150.100.221.0/24 is directly connected to R7s fa0/0 >> >> >> >> R6(config-router)#network 150.100.221.0 0.0.0.255 area 678 >> >> R6(config-router)# >> >> *Sep 1 19:15:38.911: %OSPF-4-ERRRCV: Received invalid packet: mismatch >> >> area ID, >> >> from backbone area must be virtual-link but not found from >> 150.100.12.2, >> >> FastEt >> >> hernet0/1 >> >> >> >> Please help me out. >> >> >> >> Kind Regards >> >> Ahmed >> >> >> >> ------------------------------ >> >> Låna pengar utan säkerhet. >> >> Sök och jämför lån hos >> >> Kelkoo.< >> http://www.kelkoo.se/c-100390123-lan-utan-sakerhet.html?partnerId=96915014 >> > >> >> ------------------------------ >> >> With Windows Live, you can organize, edit, and share your photos. Click >> >> here. <http://www.windowslive.com/Desktop/PhotoGallery> >> >> >> >> >> >> ------------------------------ >> >> Ta semester! - sök efter resor hos Kelkoo. >> >> Jämför pris på flygbiljetter och hotellrum: >> >> http://www.kelkoo.se/c-169901-resor-biljetter.html< >> http://www.kelkoo.se/c-169901-resor-biljetter.html?partnerId=96914051> >> >> _______________________________________________ >> >> For more information regarding industry leading CCIE Lab training, >> please >> >> visit www.ipexpert.com >> >> >> >> >> > >> > >> > -- >> > Bryan Bartik >> > CCIE #23707 (R&S), CCNP >> > Sr. Support Engineer - IPexpert, Inc. >> > URL: http://www.IPexpert.com >> > >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > -- Regards, Joe Astorino - CCIE #24347 R&S Technical Instructor - IPexpert, Inc. Cell: +1.586.212.6107 Fax: +1.810.454.0130 Mailto: [email protected]
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
