Hi there,
I tried Volume 2 - Lab3 using GNS3 and I am getting weird output. I configured 
MLPPP between R6 and R9 but they could not ping each other:


R6>sh ip int br
Interface                  IP-Address      OK? Method Status                
Protocol
FastEthernet0/0            unassigned      YES NVRAM  up                    up
Serial0/0                  110.99.46.6     YES NVRAM  up                    up
FastEthernet0/1            unassigned      YES NVRAM  up                    up
Serial0/1                  unassigned      YES NVRAM  up                    up
Serial0/2                  unassigned      YES NVRAM  up                    up
Serial0/3                  unassigned      YES NVRAM  administratively down down
Multilink1                 110.99.96.6     YES NVRAM  up                    up
R6>ping 110.99.96.5

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 110.99.96.5, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
R6>sh ip route 110.99.96.6
% Subnet not in table
R6>sh ip route 110.99.46.6
Routing entry for 110.99.46.0/27
  Known via "connected", distance 0, metric 0 (connected, via interface)
  Routing Descriptor Blocks:
  * directly connected, via Serial0/0
      Route metric is 0, traffic share count is 1

R6>

Same output on R9:

R9>sh ip int br
Interface                  IP-Address      OK? Method Status                
Protocol
FastEthernet0/0            unassigned      YES NVRAM  up                    up
Serial0/0                  unassigned      YES NVRAM  up                    down
FastEthernet0/1            unassigned      YES NVRAM  up                    up
Serial0/1                  unassigned      YES NVRAM  up                    up
Serial0/2                  unassigned      YES NVRAM  up                    up
Serial0/3                  unassigned      YES NVRAM  administratively down down
Multilink1                 110.99.96.5     YES NVRAM  up                    up
R9>ping 110.99.96.6

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 110.99.96.6, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
R9>sh ip route 110.99.96.5
% Network not in table
R9>

I could not find what's wrong !


Patrice Ngassam
CEO NEN NET Inc.

 




From: [email protected]
To: [email protected]
Date: Fri, 11 Jun 2010 00:37:50 -0400
Subject: Re: [OSL | CCIE_RS] Do I put my wic-1&2t's in slot 0 or slot 1?
















I used slot 1 and 2 to enable the configs to work better.

 

This allows for faster pasting of configs.  This is the
area that seems to slow down the most...prepping my lab for the study module.

                                          
_________________________________________________________________
Découvrez Windows Phone 7 : Une nouvelle ère de téléphones !
http://www.microsoft.com/windowsmobile/fr-fr/cmpn1/windowsphone7series/default.mspx
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to