No map to R2
frame-relay map ip 150.100.24.2 402
R4 :
!
interface Serial0/0/0
bandwidth 64
ip address 150.100.24.4 255.255.255.0
ip nat enable
encapsulation frame-relay
ip ospf network point-to-point
no arp frame-relay
frame-relay map ip 150.100.24.4 402 broadcast
no frame-relay inverse-arp
frame-relay lmi-type cisco
end Jason Maynard
________________________________
From: Amer Mustafa <[email protected]>
To: [email protected]
Sent: Wed, October 20, 2010 2:40:45 PM
Subject: [OSL | CCIE_RS] Weird issue facing.
Weird issue facing , OSPF neighborship is up between R4 and R2, though i cant
ping R2 from R4. below are the configuratons on the interfaces , can anyone
adivse why is that ?
R2 :
interface Serial0/1/0
description Frame Relay Links
no ip address
encapsulation frame-relay
no arp frame-relay
no frame-relay inverse-arp
frame-relay lmi-type cisco
!
interface Serial0/1/0.24 point-to-point
description Frame Relay Cloud 2
bandwidth 64
ip address 150.100.24.2 255.255.255.0
frame-relay interface-dlci 204
R4 :
!
interface Serial0/0/0
bandwidth 64
ip address 150.100.24.4 255.255.255.0
ip nat enable
encapsulation frame-relay
ip ospf network point-to-point
no arp frame-relay
frame-relay map ip 150.100.24.4 402 broadcast
no frame-relay inverse-arp
frame-relay lmi-type cisco
end
==========
on R4 :
R4(config)#do sospfn
Neighbor ID Pri State Dead Time Address Interface
200.0.0.2 0 FULL/ - 00:00:39 150.100.24.2 Serial0/0/0
-------------
on R4 :
R4#ping 150.100.24.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 150.100.24.2, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
