Ahhhhh I just noticed Steve beat me to the punch :P
From: [email protected] [mailto:[email protected]] On Behalf Of Jason Maynard Sent: October-20-10 2:56 PM To: Amer Mustafa; [email protected] Subject: Re: [OSL | CCIE_RS] Weird issue facing. No map to R2 frame-relay map ip 150.100.24.2 402 R4 : ! interface Serial0/0/0 bandwidth 64 ip address 150.100.24.4 255.255.255.0 ip nat enable encapsulation frame-relay ip ospf network point-to-point no arp frame-relay frame-relay map ip 150.100.24.4 402 broadcast no frame-relay inverse-arp frame-relay lmi-type cisco end Jason Maynard _____ From: Amer Mustafa <[email protected]> To: [email protected] Sent: Wed, October 20, 2010 2:40:45 PM Subject: [OSL | CCIE_RS] Weird issue facing. Weird issue facing , OSPF neighborship is up between R4 and R2, though i cant ping R2 from R4. below are the configuratons on the interfaces , can anyone adivse why is that ? R2 : interface Serial0/1/0 description Frame Relay Links no ip address encapsulation frame-relay no arp frame-relay no frame-relay inverse-arp frame-relay lmi-type cisco ! interface Serial0/1/0.24 point-to-point description Frame Relay Cloud 2 bandwidth 64 ip address 150.100.24.2 255.255.255.0 frame-relay interface-dlci 204 R4 : ! interface Serial0/0/0 bandwidth 64 ip address 150.100.24.4 255.255.255.0 ip nat enable encapsulation frame-relay ip ospf network point-to-point no arp frame-relay frame-relay map ip 150.100.24.4 402 broadcast no frame-relay inverse-arp frame-relay lmi-type cisco end ========== on R4 : R4(config)#do sospfn Neighbor ID Pri State Dead Time Address Interface 200.0.0.2 0 FULL/ - 00:00:39 150.100.24.2 Serial0/0/0 ------------- on R4 : R4#ping 150.100.24.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 150.100.24.2, timeout is 2 seconds: ..... Success rate is 0 percent (0/5)
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
