It looks like the underlying problem is possibly with trunk status. One link is access and one is trunking, but etherchannel requires that they be the same.
marc abel <[email protected]> wrote: >I have two dynamic desirable trunks configured as an ether-channel and >one keeps un-bundling > >Nov 20 19:49:06.347: %EC-5-CANNOT_BUNDLE2: Fa0/23 is not compatible >with Fa0/24 and will be suspended (trunk mode of Fa0/23 is access, >Fa0/24 is trunk) >Nov 20 19:49:07.335: %LINEPROTO-5-UPDOWN: Line protocol on Interface >FastEthernet0/23, changed state to down > > >It then comes back up and everything seems fine for a bit and then it >happens again. Any idea what the issue could be or how to >troubleshoot? Obviously I could configure them as statically trunking >but a lab requirement prevents this. > >Thank you, > >Marc >_______________________________________________ >For more information regarding industry leading CCIE Lab training, please >visit www.ipexpert.com > >Are you a CCNP or CCIE and looking for a job? Check out >www.PlatinumPlacement.com > >To Unsubscribe from this list please visit the following link and follow the >directions to unsubscribe. http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com To Unsubscribe from this list please visit the following link and follow the directions to unsubscribe. http://onlinestudylist.com/mailman/listinfo/ccie_rs
