I wondered if it was a physical error too. However after removing and
reapplying the ether channel config it seems to have stabilized. I had
all the ports shut down when I first configured it so I am not sure
why I had the issue.

On Sun, Nov 20, 2011 at 4:30 PM, Ben Hughes <[email protected]> wrote:
> Hi Marc,
>
> I'm wondering if you might have a cabling problem?  If the periodic DTP 
> frames couldn't get through the trunk may revert back to an access port and 
> thus be dropped from the Etherchannel.  You could try enabling UDLD and 
> seeing if the port(s) get err-disabled after a period of time.
>
> Cheers,
> Ben.
>
> From: Doug Koobs <[email protected]<mailto:[email protected]>>
> Date: Mon, 21 Nov 2011 08:17:59 +1100
> To: marc abel <[email protected]<mailto:[email protected]>>, 
> "[email protected]<mailto:[email protected]>" 
> <[email protected]<mailto:[email protected]>>
> Subject: Re: [OSL | CCIE_RS] Ether-channel error
>
> It looks like the underlying problem is possibly with trunk status. One link 
> is access and one is trunking, but etherchannel requires that they be the 
> same.
>
> marc abel <[email protected]<mailto:[email protected]>> wrote:
>
> I have two dynamic desirable trunks configured as an ether-channel and
> one keeps un-bundling
>
> Nov 20 19:49:06.347: %EC-5-CANNOT_BUNDLE2: Fa0/23 is not compatible
> with Fa0/24 and will be suspended (trunk mode of Fa0/23 is access,
> Fa0/24 is trunk)
> Nov 20 19:49:07.335: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/23, changed state to down
>
>
> It then comes back up and everything seems fine for a bit and then it
> happens again. Any idea what the issue could be or how to
> troubleshoot? Obviously I could configure them as statically trunking
> but a lab requirement prevents this.
>
> Thank you,
>
> Marc
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
>
> To Unsubscribe from this list please visit the following link and follow the 
> directions to unsubscribe. http://onlinestudylist.com/mailman/listinfo/ccie_rs
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
>
> To Unsubscribe from this list please visit the following link and follow the 
> directions to unsubscribe. http://onlinestudylist.com/mailman/listinfo/ccie_rs
>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

To Unsubscribe from this list please visit the following link and follow the 
directions to unsubscribe. http://onlinestudylist.com/mailman/listinfo/ccie_rs

Reply via email to