>The Mikrotik is shaping an STM1 for 70 Customers. *1. Does Mikrotik allocate specific bandwidth to individual customers (eg. 1Mb/s to custA, 2Mb/s to custB) or is it just a blanket 155MB/s shaping policy? * 2. Do you have a policy that limit default traffic class on your Mikrotik 3. What exactly is the experience of the customers? Is it same as yours?
>The policy on 7609 is policing the bandwidth, 4. I doubt that the problem is from here since everything works without mikrotik. But you may just do a "show policy-map" so that we can see the burst you configured. > which I applied it after the >shaper gone out of the game. *5. is the shaper on the Mikrotik still enabled?* *6. What happens when you disable it?* >The bridge, eth1 and eth2 on the Mikrotik: MTU:1500 , L2 MTU:1598 >and the MAX L2 MTU on eth1 and eth2 is 4078 >The Queue type on eth1 and eth2 is named ethernet-default, kind: pfifo and >the queue size is 50 packets. >These are all the default configurations. >Everything was right for about 3 months! *7. What changed? was it (a.) configuration (b.) Bandwidth available (c.) Bandwidth Consumption by customers increased (d.) somethin else (e.) nothing at all.* >But one day this tragedy happened to me. * * * * * * On Tue, Nov 22, 2011 at 6:51 AM, Mohammad Moghaddas <[email protected]>wrote: > The Mikrotik is shaping an STM1 for 70 Customers. > The policy on 7609 is policing the bandwidth, which I applied it after the > shaper gone out of the game. > The bridge, eth1 and eth2 on the Mikrotik: MTU:1500 , L2 MTU:1598 > and the MAX L2 MTU on eth1 and eth2 is 4078 > The Queue type on eth1 and eth2 is named ethernet-default, kind: pfifo and > the queue size is 50 packets. > These are all the default configurations. > Everything was right for about 3 months! > But one day this tragedy happened to me. > > On Tue, Nov 22, 2011 at 12:34 AM, Bob McCouch <[email protected]> wrote: > > > Is it possible your bandwidth shaper device is kicking in and dropping > > pings? > > > > It's one of two things as I would see it: > > > > 1) The Mikrotik device has a problem > > > > 2) The Mikrotik device is working as configured, and bandwidth > shaping/QOS > > are dropping some of your test data. > > > > On Mon, Nov 21, 2011 at 11:39 AM, Mohammad Moghaddas < > > [email protected]> wrote: > > > >> Hi. > >> I'm currently experiencing a connectivity problem between a 7609 and a > >> 3560, which so matters for my current job position. > >> There is Mikrotik rb1200 RouterBoard between these to which two of its > >> ports are connected to the Router and Switch and I've made them bridge. > I > >> use this Mikrotik Device as a Bandwidth Shaper. > >> When the 7609 and the 3560 are DIRECTLY connected, 7609 G5/2 <-> 3560 > >> G0/22, there is no problem! > >> But when the Mikrotik is inserted between, for a while everything is OK, > >> but accidentals the connectivity is lost, but after a while again it > >> changes to OK. > >> > >> Mikrotik ETH1 is connected to the 7609 G5/2 and is 1Gb and full-duplex > as > >> ETH2 which is connected to the 3560 G5/22, and both are mapped to > bridge1. > >> > >> 7609Router# sh ver > >> c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version > >> 15.1(3)S, RELEASE SOFTWARE (fc1) > >> Cisco CISCO7609-S (M8500) processor (revision 1.0) with 917504K/65536K > >> bytes of memory. > >> Processor board ID FOX1442H66G > >> BASEBOARD: RSP720 > >> CPU: MPC8548_E, Version: 2.0, (0x80390020) > >> CORE: E500, Version: 2.0, (0x80210020) > >> CPU:1200MHz, CCB:400MHz, DDR:200MHz, > >> L1: D-cache 32 kB enabled > >> I-cache 32 kB enabled > >> > >> Last reset from power-on > >> 1 SIP-400 controller (5 GigabitEthernet)(4 POS). > >> 1 Virtual Ethernet interface > >> 7 Gigabit Ethernet interfaces > >> 4 Packet over SONET interfaces > >> 3964K bytes of non-volatile configuration memory. > >> > >> 507024K bytes of Internal ATA PCMCIA card (Sector size 512 bytes). > >> Configuration register is 0x2102 > >> ! > >> 7609Router#sr int g5/2 > >> Building configuration... > >> > >> Current configuration : 241 bytes > >> ! > >> interface GigabitEthernet5/2 > >> description Connected to Core Switch > >> ip address 192.168.1.1 255.255.255.252 > >> ip ospf network point-to-point > >> ip ospf dead-interval 20 > >> ip ospf hello-interval 2 > >> no mdix auto > >> service-policy output SHAPE > >> ! > >> 7609Router#sh inter g5/2 > >> GigabitEthernet5/2 is up, line protocol is up (connected) > >> Hardware is C7600 1Gb 802.3, address is 588d.0912.6d80 (bia > >> 588d.0912.6d80) > >> Description: Connected to Core Switch > >> Internet address is 192.168.1.1/30 > >> MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, > >> reliability 255/255, txload 6/255, rxload 8/255 > >> Encapsulation ARPA, loopback not set > >> Keepalive set (10 sec) > >> Full-duplex, 1000Mb/s, media type is T > >> Media-type configured as SFP connector > >> input flow-control is off, output flow-control is off > >> Clock mode is auto > >> ARP type: ARPA, ARP Timeout 04:00:00 > >> Last input 00:00:00, output 00:00:00, output hang never > >> Last clearing of "show interface" counters never > >> Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 > >> Queueing strategy: fifo > >> Output queue: 0/40 (size/max) > >> 5 minute input rate 31810000 bits/sec, 30156 packets/sec > >> 5 minute output rate 27354000 bits/sec, 6659 packets/sec > >> L2 Switched: ucast: 11490123 pkt, 1089129555 bytes - mcast: 601337 pkt, > >> 64168604 bytes > >> L3 in Switched: ucast: 9808379794 pkt, 3373019223246 bytes - mcast: 0 > >> pkt, 0 bytes mcast > >> L3 out Switched: ucast: 9861630782 pkt, 5796605234022 bytes mcast: 0 > pkt, > >> 0 bytes > >> 9841352782 packets input, 3375755871116 bytes, 0 no buffer > >> Received 662805 broadcasts (0 IP multicasts) > >> 0 runts, 0 giants, 0 throttles > >> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored > >> 0 watchdog, 0 multicast, 0 pause input > >> 0 input packets with dribble condition detected > >> 9879380703 packets output, 5812334751940 bytes, 0 underruns > >> 0 output errors, 0 collisions, 5 interface resets > >> 0 unknown protocol drops > >> 0 babbles, 0 late collision, 0 deferred > >> 0 lost carrier, 0 no carrier, 0 pause output > >> 0 output buffer failures, 0 output buffers swapped out > >> ! > >> 7609Router#sh mod all > >> Mod Ports Card Type Model > Serial > >> No. > >> --- ----- -------------------------------------- ------------------ > >> ----------- > >> 5 2 Route Switch Processor 720 (Active) RSP720-3C-GE > >> JAE1224LBQV > >> 8 0 4-subslot SPA Interface Processor-400 7600-SIP-400 > >> JAE1125MAUY > >> > >> Mod MAC addresses Hw Fw Sw > >> Status > >> --- ---------------------------------- ----- ------------- ------------ > >> ------- > >> 5 001d.4558.fb9c to 001d.4558.fb9f 5.2 12.2(33r)SRD 15.1(3) > Ok > >> 8 001b.53cc.d040 to 001b.53cc.d0bf 2.4 15.1(3)S 15.1(3)S > Ok > >> > >> Mod Sub-Module Model Serial Hw > >> Status > >> ---- --------------------------- ------------------ ----------- ------- > >> ------- > >> 5 Policy Feature Card 3 7600-PFC3C JAE1224LAJO 1.1 > Ok > >> 5 C7600 MSFC4 Daughterboard 7600-MSFC4 JAE1224L2FO 1.1 > Ok > >> 8/0 5xGE SPA SPA-5X1GE-V2 JAE141003QJ 1.2 > Ok > >> 8/1 4xOC3 POS SPA SPA-4XOC3-POS JAE12046H75 1.0 > Ok > >> > >> Mod Online Diag Status > >> ---- ------------------- > >> 5 Pass > >> 8 Pass > >> 8/0 Pass > >> 8/1 Pass > >> ! > >> 7609Router#sh diagbus > >> Slot 8: Logical_index 16 > >> 4-subslot SPA Interface Processor-400 controller > >> Board is analyzed ipc ready > >> HW rev 2.4, board revision C0 > >> Serial Number: JAE1125MAUY Part number: 73-8404-14 > >> > >> Slot database information: > >> Flags: 0x2004 Insertion time: 0x1C81C (1w6d ago) > >> > >> Controller Memory Size: > >> 992 MBytes CPU Memory > >> 31 MBytes Packet Memory > >> 1023 MBytes Total on Board SDRAM > >> Cisco IOS Software, cwlc Software (sip2-DW-M), Version 15.1(3)S, > >> RELEASE SOFTWARE (fc1) > >> > >> SPA Information: > >> subslot 8/0: SPA-5X1GE-V2 (0x50A), status: ok > >> subslot 8/1: SPA-4XOC3-POS (0x440), status: ok > >> ! > >> 7609Router# sh diagnostic result all detail > >> > >> Current bootup diagnostic level: minimal > >> > >> Module 5: Route Switch Processor 720 (Active) SerialNo : JAE1224LBQV > >> > >> Overall Diagnostic Result for Module 5 : PASS > >> Diagnostic level at card bootup: minimal > >> > >> Test results: (. = Pass, F = Fail, U = Untested) > >> > >> > >> > >> > ___________________________________________________________________________ > >> > >> 1) TestScratchRegister -------------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 34753 > >> Last test testing type ------> Health Monitoring > >> Last test execution time ----> Nov 21 2011 20:04:02 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 21 2011 20:04:02 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 2) TestSPRPInbandPing --------------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 69506 > >> Last test testing type ------> Health Monitoring > >> Last test execution time ----> Nov 21 2011 20:04:05 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 21 2011 20:04:05 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> CPU util(5sec) SP -----------> 9% > >> CPU util(5sec) RP -----------> 2% > >> Traffic ---------------------> 0% > >> netint_thr_active -----------> 0 > >> Inband Tx_Rate --------------> 1266 > >> Inband Rx_Rate --------------> 26 > >> Per-device Failure Count ----> n/a > >> > >> > >> > ___________________________________________________________________________ > >> > >> 3) TestTransceiverIntegrity: > >> > >> Port 1 2 > >> ---------- > >> . . > >> > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 23 > >> Last test testing type ------> OnDemand > >> Last test execution time ----> Nov 09 2011 15:24:50 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 09 2011 15:24:50 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 4) TestActiveToStandbyLoopback: > >> > >> Port 1 2 > >> ---------- > >> U U > >> > >> > >> Error code ------------------> 3 (DIAG_SKIPPED) > >> Total run count -------------> 0 > >> Last test testing type ------> n/a > >> Last test execution time ----> n/a > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> n/a > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 5) TestLoopback: > >> > >> Port 1 2 > >> ---------- > >> . . > >> > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:14:21 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:14:21 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 6) TestNewIndexLearn ---------------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:14:22 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:14:22 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 7) TestDontConditionalLearn --------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:14:22 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:14:22 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 8) TestBadBpduTrap -----------------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:14:22 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:14:22 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 9) TestMatchCapture ----------------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:14:23 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:14:23 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 10) TestProtocolMatchChannel --------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:14:24 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:14:24 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 11) TestFibDevices ------------------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:14:25 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:14:25 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 12) TestIPv4FibShortcut -------------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:14:25 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:14:25 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 13) TestL3Capture2 ------------------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:14:25 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:14:25 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 14) TestIPv6FibShortcut -------------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:14:26 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:14:26 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 15) TestMPLSFibShortcut -------------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:14:26 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:14:26 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 16) TestNATFibShortcut --------------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:14:26 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:14:26 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 17) TestAclPermit -------------------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:14:26 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:14:26 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 18) TestQoSTcam ---------------------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:14:27 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:14:27 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 19) TestL3VlanMet -------------------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:14:27 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:14:27 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 20) TestIngressSpan -----------------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:14:27 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:14:27 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 21) TestEgressSpan ------------------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:14:27 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:14:27 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 22) TestNetflowInlineRewrite: > >> > >> Port 1 2 > >> ---------- > >> U U > >> > >> > >> Error code ------------------> 3 (DIAG_SKIPPED) > >> Total run count -------------> 0 > >> Last test testing type ------> n/a > >> Last test execution time ----> n/a > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> n/a > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 23) TestFabricSnakeForward ----------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:14:27 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:14:27 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 24) TestFabricSnakeBackward ---------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:14:27 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:14:27 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 25) TestTrafficStress ---------------> U > >> > >> Error code ------------------> 3 (DIAG_SKIPPED) > >> Total run count -------------> 0 > >> Last test testing type ------> n/a > >> Last test execution time ----> n/a > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> n/a > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 26) TestFibTcamSSRAM ----------------> U > >> > >> Error code ------------------> 3 (DIAG_SKIPPED) > >> Total run count -------------> 0 > >> Last test testing type ------> n/a > >> Last test execution time ----> n/a > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> n/a > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 27) TestAsicMemory ------------------> U > >> > >> Error code ------------------> 3 (DIAG_SKIPPED) > >> Total run count -------------> 0 > >> Last test testing type ------> n/a > >> Last test execution time ----> n/a > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> n/a > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 28) TestAclQosTcam ------------------> U > >> > >> Error code ------------------> 3 (DIAG_SKIPPED) > >> Total run count -------------> 0 > >> Last test testing type ------> n/a > >> Last test execution time ----> n/a > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> n/a > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 29) TestNetflowTcam -----------------> U > >> > >> Error code ------------------> 3 (DIAG_SKIPPED) > >> Total run count -------------> 0 > >> Last test testing type ------> n/a > >> Last test execution time ----> n/a > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> n/a > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 30) ScheduleSwitchover --------------> U > >> > >> Error code ------------------> 3 (DIAG_SKIPPED) > >> Total run count -------------> 0 > >> Last test testing type ------> n/a > >> Last test execution time ----> n/a > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> n/a > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 31) FirmwareDiagStatus --------------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:14:28 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:14:28 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 32) TestFabricFlowControlStatus -----> U > >> > >> Error code ------------------> 3 (DIAG_SKIPPED) > >> Total run count -------------> 0 > >> Last test testing type ------> n/a > >> Last test execution time ----> n/a > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> n/a > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> Current run count -------------------------->: 0 > >> First test execution time ------------------>: > >> Last test execution time ------------------->: > >> Total FPOE Rate0 Count --------------------->: 0 > >> Total FPOE Reduced Rate Count -------------->: 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 33) TestErrorCounterMonitor ---------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 34753 > >> Last test testing type ------> Health Monitoring > >> Last test execution time ----> Nov 21 2011 20:04:05 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 21 2011 20:04:05 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> Error Records ---------------> n/a > >> > >> > >> > ___________________________________________________________________________ > >> > >> > >> Module 8: 4-subslot SPA Interface Processor-400 SerialNo : JAE1125MAUY > >> > >> Overall Diagnostic Result for Module 8 : PASS > >> Diagnostic level at card bootup: minimal > >> > >> Test results: (. = Pass, F = Fail, U = Untested) > >> > >> > >> > >> > ___________________________________________________________________________ > >> > >> 1) BusConnectivityTest -------------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 486479 > >> Last test testing type ------> Health Monitoring > >> Last test execution time ----> Nov 21 2011 20:04:16 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 21 2011 20:04:16 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 2) TestEobcStressPing --------------> U > >> > >> Error code ------------------> 3 (DIAG_SKIPPED) > >> Total run count -------------> 0 > >> Last test testing type ------> n/a > >> Last test execution time ----> n/a > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> n/a > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> 3) TestFirmwareDiagStatus ----------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:15:24 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:15:24 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> > >> > ___________________________________________________________________________ > >> > >> > >> Module 8/0: 5xGE SPA SerialNo : JAE141003QJ SerialNo : > >> JAE1125MAUY > >> > >> Overall Diagnostic Result for Module 8/0 : PASS > >> Diagnostic level at card bootup: minimal > >> > >> Test results: (. = Pass, F = Fail, U = Untested) > >> > >> > >> ___________________________________________________________________ > >> > >> 1) TestSpaScratchRegister ----------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:15:29 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:15:29 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> ___________________________________________________________________ > >> > >> 2) PortLoopbackTest: > >> > >> Port 1 2 3 4 5 > >> ------------------- > >> U U U U U > >> > >> > >> Error code ------------------> 3 (DIAG_SKIPPED) > >> Total run count -------------> 0 > >> Last test testing type ------> n/a > >> Last test execution time ----> n/a > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> n/a > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> ___________________________________________________________________ > >> > >> > >> Module 8/1: 4xOC3 POS SPA SerialNo : JAE12046H75 SerialNo : > >> JAE1125MAUY > >> > >> Overall Diagnostic Result for Module 8/1 : PASS > >> Diagnostic level at card bootup: minimal > >> > >> Test results: (. = Pass, F = Fail, U = Untested) > >> > >> > >> ___________________________________________________________________ > >> > >> 1) TestSpaScratchRegister ----------> . > >> > >> Error code ------------------> 0 (DIAG_SUCCESS) > >> Total run count -------------> 1 > >> Last test testing type ------> Bootup > >> Last test execution time ----> Nov 08 2011 18:15:30 > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> Nov 08 2011 18:15:30 > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> ___________________________________________________________________ > >> > >> 2) PortLoopbackTest: > >> > >> Port 1 2 3 4 > >> ---------------- > >> U U U U > >> > >> > >> Error code ------------------> 3 (DIAG_SKIPPED) > >> Total run count -------------> 0 > >> Last test testing type ------> n/a > >> Last test execution time ----> n/a > >> First test failure time -----> n/a > >> Last test failure time ------> n/a > >> Last test pass time ---------> n/a > >> Total failure count ---------> 0 > >> Consecutive failure count ---> 0 > >> > >> ___________________________________________________________________ > >> ! > >> ====================================== > >> 3560Switch#sh ver > >> C3560 Software (C3560-IPSERVICESK9-M), Version 15.0(1)SE, RELEASE > SOFTWARE > >> (fc1) > >> cisco WS-C3560G-24TS (PowerPC405) processor (revision F0) with 131072K > >> bytes of memory. > >> Processor board ID FOC1518Y4VP > >> Last reset from power-on > >> 3 Virtual Ethernet interfaces > >> 28 Gigabit Ethernet interfaces > >> The password-recovery mechanism is enabled. > >> > >> 512K bytes of flash-simulated non-volatile configuration memory. > >> Base ethernet MAC Address : E8:BA:70:EB:A6:80 > >> Motherboard assembly number : 73-10215-06 > >> Power supply part number : 341-0098-02 > >> Motherboard serial number : FOC151805NM > >> Power supply serial number : AZS15180166 > >> Model revision number : F0 > >> Motherboard revision number : A0 > >> Model number : WS-C3560G-24TS-S > >> System serial number : FOC1518Y4VP > >> Top Assembly Part Number : 800-26851-03 > >> Top Assembly Revision Number : C0 > >> Version ID : V05 > >> CLEI Code Number : COMB200BRA > >> Hardware Board Revision Number : 0x09 > >> > >> > >> Switch Ports Model SW Version SW > >> Image > >> ------ ----- ----- ---------- > >> ---------- > >> * 1 28 WS-C3560G-24TS 15.0(1)SE > >> C3560-IPSERVICESK9-M > >> > >> > >> Configuration register is 0xF > >> ! > >> 3560Switch#sr int g0/22 > >> Building configuration... > >> > >> Current configuration : 176 bytes > >> ! > >> interface GigabitEthernet0/22 > >> no switchport > >> ip address 192.168.1.2 255.255.255.252 > >> ip ospf network point-to-point > >> ip ospf hello-interval 2 > >> ip ospf dead-interval 20 > >> ! > >> 3560Switch#sh int g0/22 > >> GigabitEthernet0/22 is up, line protocol is up (connected) > >> Hardware is Gigabit Ethernet, address is e8ba.70eb.a6d1 (bia > >> e8ba.70eb.a6d1) > >> Internet address is 192.168.1.2/30 > >> MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, > >> reliability 255/255, txload 9/255, rxload 8/255 > >> Encapsulation ARPA, loopback not set > >> Keepalive set (10 sec) > >> Full-duplex, 1000Mb/s, media type is 10/100/1000BaseTX > >> input flow-control is off, output flow-control is unsupported > >> ARP type: ARPA, ARP Timeout 04:00:00 > >> Last input 00:00:00, output 00:00:00, output hang never > >> Last clearing of "show interface" counters never > >> Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 434 > >> Queueing strategy: fifo > >> Output queue: 0/40 (size/max) > >> 5 minute input rate 31592000 bits/sec, 7630 packets/sec > >> 5 minute output rate 37916000 bits/sec, 43189 packets/sec > >> 9857764843 packets input, 5428762085664 bytes, 0 no buffer > >> Received 623660 broadcasts (0 IP multicasts) > >> 0 runts, 0 giants, 0 throttles > >> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored > >> 0 watchdog, 622706 multicast, 0 pause input > >> 0 input packets with dribble condition detected > >> 10000621950 packets output, 3259212102360 bytes, 0 underruns > >> 0 output errors, 0 collisions, 1 interface resets > >> 0 unknown protocol drops > >> 0 babbles, 0 late collision, 0 deferred > >> 0 lost carrier, 0 no carrier, 0 pause output > >> 0 output buffer failures, 0 output buffers swapped out > >> ! > >> 3560Switch#ping 192.168.1.1 rep 100000000 tim 1 > >> !!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Omitted about 5000 > >> pings > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!..!!!!!!!.!!!!!!!!!.!!.!!!!!.....!!!..! > >> ......!!!!!!!!!!!!!!!!!!!!!!!..!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > >> > >> This ping output is exactly the same when I try to ping 192.168.1.2 from > >> 7609 > >> At the moment of problem, I try to ping both devices using the Mikrotik > >> device which is in between, and at that time ping time increases > including > >> some request time-out. > >> Thanks a lot and so sorry for such a long question. > >> _______________________________________________ > >> For more information regarding industry leading CCIE Lab training, > please > >> visit www.ipexpert.com > >> > >> Are you a CCNP or CCIE and looking for a job? Check out > >> www.PlatinumPlacement.com > >> > >> To Unsubscribe from this list please visit the following link and follow > >> the directions to unsubscribe. > >> http://onlinestudylist.com/mailman/listinfo/ccie_rs > >> > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > To Unsubscribe from this list please visit the following link and follow > the directions to unsubscribe. > http://onlinestudylist.com/mailman/listinfo/ccie_rs > -- -- Olugbenga Oyebande MD, DAIT 234-803-302-5287 http://www.dait-ng.com Cisco Unified Network, VPN DAIT Enterprise Network Servers Broadband Internet Deployment & ISP Consultancy _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com To Unsubscribe from this list please visit the following link and follow the directions to unsubscribe. http://onlinestudylist.com/mailman/listinfo/ccie_rs
