Finally I figured the problem. The CPU process utilization on the Mikrotik cause it to hang for a short time and drop packets Thanks everybody
On Wed, Nov 23, 2011 at 3:05 PM, Oluwagbenga Oyebande < [email protected]> wrote: > >The Mikrotik is shaping an STM1 for 70 Customers. > *1. Does Mikrotik allocate specific bandwidth to individual customers > (eg. 1Mb/s to custA, 2Mb/s to custB) or is it just a blanket 155MB/s > shaping policy? > * > 2. Do you have a policy that limit default traffic class on your Mikrotik > 3. What exactly is the experience of the customers? Is it same as yours? > > >The policy on 7609 is policing the bandwidth, > 4. I doubt that the problem is from here since everything works without > mikrotik. But you may just do a "show policy-map" so that we can see the > burst you configured. > > > which I applied it after the > >shaper gone out of the game. > *5. is the shaper on the Mikrotik still enabled?* > *6. What happens when you disable it?* > > >The bridge, eth1 and eth2 on the Mikrotik: MTU:1500 , L2 MTU:1598 > >and the MAX L2 MTU on eth1 and eth2 is 4078 > >The Queue type on eth1 and eth2 is named ethernet-default, kind: pfifo and > >the queue size is 50 packets. > >These are all the default configurations. > >Everything was right for about 3 months! > *7. What changed? was it (a.) configuration (b.) Bandwidth available (c.) > Bandwidth Consumption by customers increased (d.) somethin else (e.) > nothing at all.* > > >But one day this tragedy happened to me. > * > * > * > * > * > * > > On Tue, Nov 22, 2011 at 6:51 AM, Mohammad Moghaddas < > [email protected]> wrote: > >> The Mikrotik is shaping an STM1 for 70 Customers. >> The policy on 7609 is policing the bandwidth, which I applied it after the >> shaper gone out of the game. >> The bridge, eth1 and eth2 on the Mikrotik: MTU:1500 , L2 MTU:1598 >> and the MAX L2 MTU on eth1 and eth2 is 4078 >> The Queue type on eth1 and eth2 is named ethernet-default, kind: pfifo and >> the queue size is 50 packets. >> These are all the default configurations. >> Everything was right for about 3 months! >> But one day this tragedy happened to me. >> >> On Tue, Nov 22, 2011 at 12:34 AM, Bob McCouch <[email protected]> wrote: >> >> > Is it possible your bandwidth shaper device is kicking in and dropping >> > pings? >> > >> > It's one of two things as I would see it: >> > >> > 1) The Mikrotik device has a problem >> > >> > 2) The Mikrotik device is working as configured, and bandwidth >> shaping/QOS >> > are dropping some of your test data. >> > >> > On Mon, Nov 21, 2011 at 11:39 AM, Mohammad Moghaddas < >> > [email protected]> wrote: >> > >> >> Hi. >> >> I'm currently experiencing a connectivity problem between a 7609 and a >> >> 3560, which so matters for my current job position. >> >> There is Mikrotik rb1200 RouterBoard between these to which two of its >> >> ports are connected to the Router and Switch and I've made them >> bridge. I >> >> use this Mikrotik Device as a Bandwidth Shaper. >> >> When the 7609 and the 3560 are DIRECTLY connected, 7609 G5/2 <-> 3560 >> >> G0/22, there is no problem! >> >> But when the Mikrotik is inserted between, for a while everything is >> OK, >> >> but accidentals the connectivity is lost, but after a while again it >> >> changes to OK. >> >> >> >> Mikrotik ETH1 is connected to the 7609 G5/2 and is 1Gb and full-duplex >> as >> >> ETH2 which is connected to the 3560 G5/22, and both are mapped to >> bridge1. >> >> >> >> 7609Router# sh ver >> >> c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version >> >> 15.1(3)S, RELEASE SOFTWARE (fc1) >> >> Cisco CISCO7609-S (M8500) processor (revision 1.0) with 917504K/65536K >> >> bytes of memory. >> >> Processor board ID FOX1442H66G >> >> BASEBOARD: RSP720 >> >> CPU: MPC8548_E, Version: 2.0, (0x80390020) >> >> CORE: E500, Version: 2.0, (0x80210020) >> >> CPU:1200MHz, CCB:400MHz, DDR:200MHz, >> >> L1: D-cache 32 kB enabled >> >> I-cache 32 kB enabled >> >> >> >> Last reset from power-on >> >> 1 SIP-400 controller (5 GigabitEthernet)(4 POS). >> >> 1 Virtual Ethernet interface >> >> 7 Gigabit Ethernet interfaces >> >> 4 Packet over SONET interfaces >> >> 3964K bytes of non-volatile configuration memory. >> >> >> >> 507024K bytes of Internal ATA PCMCIA card (Sector size 512 bytes). >> >> Configuration register is 0x2102 >> >> ! >> >> 7609Router#sr int g5/2 >> >> Building configuration... >> >> >> >> Current configuration : 241 bytes >> >> ! >> >> interface GigabitEthernet5/2 >> >> description Connected to Core Switch >> >> ip address 192.168.1.1 255.255.255.252 >> >> ip ospf network point-to-point >> >> ip ospf dead-interval 20 >> >> ip ospf hello-interval 2 >> >> no mdix auto >> >> service-policy output SHAPE >> >> ! >> >> 7609Router#sh inter g5/2 >> >> GigabitEthernet5/2 is up, line protocol is up (connected) >> >> Hardware is C7600 1Gb 802.3, address is 588d.0912.6d80 (bia >> >> 588d.0912.6d80) >> >> Description: Connected to Core Switch >> >> Internet address is 192.168.1.1/30 >> >> MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, >> >> reliability 255/255, txload 6/255, rxload 8/255 >> >> Encapsulation ARPA, loopback not set >> >> Keepalive set (10 sec) >> >> Full-duplex, 1000Mb/s, media type is T >> >> Media-type configured as SFP connector >> >> input flow-control is off, output flow-control is off >> >> Clock mode is auto >> >> ARP type: ARPA, ARP Timeout 04:00:00 >> >> Last input 00:00:00, output 00:00:00, output hang never >> >> Last clearing of "show interface" counters never >> >> Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 >> >> Queueing strategy: fifo >> >> Output queue: 0/40 (size/max) >> >> 5 minute input rate 31810000 bits/sec, 30156 packets/sec >> >> 5 minute output rate 27354000 bits/sec, 6659 packets/sec >> >> L2 Switched: ucast: 11490123 pkt, 1089129555 bytes - mcast: 601337 >> pkt, >> >> 64168604 bytes >> >> L3 in Switched: ucast: 9808379794 pkt, 3373019223246 bytes - mcast: 0 >> >> pkt, 0 bytes mcast >> >> L3 out Switched: ucast: 9861630782 pkt, 5796605234022 bytes mcast: 0 >> pkt, >> >> 0 bytes >> >> 9841352782 packets input, 3375755871116 bytes, 0 no buffer >> >> Received 662805 broadcasts (0 IP multicasts) >> >> 0 runts, 0 giants, 0 throttles >> >> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored >> >> 0 watchdog, 0 multicast, 0 pause input >> >> 0 input packets with dribble condition detected >> >> 9879380703 packets output, 5812334751940 bytes, 0 underruns >> >> 0 output errors, 0 collisions, 5 interface resets >> >> 0 unknown protocol drops >> >> 0 babbles, 0 late collision, 0 deferred >> >> 0 lost carrier, 0 no carrier, 0 pause output >> >> 0 output buffer failures, 0 output buffers swapped out >> >> ! >> >> 7609Router#sh mod all >> >> Mod Ports Card Type Model >> Serial >> >> No. >> >> --- ----- -------------------------------------- ------------------ >> >> ----------- >> >> 5 2 Route Switch Processor 720 (Active) RSP720-3C-GE >> >> JAE1224LBQV >> >> 8 0 4-subslot SPA Interface Processor-400 7600-SIP-400 >> >> JAE1125MAUY >> >> >> >> Mod MAC addresses Hw Fw Sw >> >> Status >> >> --- ---------------------------------- ----- ------------- ------------ >> >> ------- >> >> 5 001d.4558.fb9c to 001d.4558.fb9f 5.2 12.2(33r)SRD 15.1(3) >> Ok >> >> 8 001b.53cc.d040 to 001b.53cc.d0bf 2.4 15.1(3)S 15.1(3)S >> Ok >> >> >> >> Mod Sub-Module Model Serial Hw >> >> Status >> >> ---- --------------------------- ------------------ ----------- ------- >> >> ------- >> >> 5 Policy Feature Card 3 7600-PFC3C JAE1224LAJO 1.1 >> Ok >> >> 5 C7600 MSFC4 Daughterboard 7600-MSFC4 JAE1224L2FO 1.1 >> Ok >> >> 8/0 5xGE SPA SPA-5X1GE-V2 JAE141003QJ 1.2 >> Ok >> >> 8/1 4xOC3 POS SPA SPA-4XOC3-POS JAE12046H75 1.0 >> Ok >> >> >> >> Mod Online Diag Status >> >> ---- ------------------- >> >> 5 Pass >> >> 8 Pass >> >> 8/0 Pass >> >> 8/1 Pass >> >> ! >> >> 7609Router#sh diagbus >> >> Slot 8: Logical_index 16 >> >> 4-subslot SPA Interface Processor-400 controller >> >> Board is analyzed ipc ready >> >> HW rev 2.4, board revision C0 >> >> Serial Number: JAE1125MAUY Part number: 73-8404-14 >> >> >> >> Slot database information: >> >> Flags: 0x2004 Insertion time: 0x1C81C (1w6d ago) >> >> >> >> Controller Memory Size: >> >> 992 MBytes CPU Memory >> >> 31 MBytes Packet Memory >> >> 1023 MBytes Total on Board SDRAM >> >> Cisco IOS Software, cwlc Software (sip2-DW-M), Version 15.1(3)S, >> >> RELEASE SOFTWARE (fc1) >> >> >> >> SPA Information: >> >> subslot 8/0: SPA-5X1GE-V2 (0x50A), status: ok >> >> subslot 8/1: SPA-4XOC3-POS (0x440), status: ok >> >> ! >> >> 7609Router# sh diagnostic result all detail >> >> >> >> Current bootup diagnostic level: minimal >> >> >> >> Module 5: Route Switch Processor 720 (Active) SerialNo : JAE1224LBQV >> >> >> >> Overall Diagnostic Result for Module 5 : PASS >> >> Diagnostic level at card bootup: minimal >> >> >> >> Test results: (. = Pass, F = Fail, U = Untested) >> >> >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 1) TestScratchRegister -------------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 34753 >> >> Last test testing type ------> Health Monitoring >> >> Last test execution time ----> Nov 21 2011 20:04:02 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 21 2011 20:04:02 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 2) TestSPRPInbandPing --------------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 69506 >> >> Last test testing type ------> Health Monitoring >> >> Last test execution time ----> Nov 21 2011 20:04:05 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 21 2011 20:04:05 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> CPU util(5sec) SP -----------> 9% >> >> CPU util(5sec) RP -----------> 2% >> >> Traffic ---------------------> 0% >> >> netint_thr_active -----------> 0 >> >> Inband Tx_Rate --------------> 1266 >> >> Inband Rx_Rate --------------> 26 >> >> Per-device Failure Count ----> n/a >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 3) TestTransceiverIntegrity: >> >> >> >> Port 1 2 >> >> ---------- >> >> . . >> >> >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 23 >> >> Last test testing type ------> OnDemand >> >> Last test execution time ----> Nov 09 2011 15:24:50 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 09 2011 15:24:50 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 4) TestActiveToStandbyLoopback: >> >> >> >> Port 1 2 >> >> ---------- >> >> U U >> >> >> >> >> >> Error code ------------------> 3 (DIAG_SKIPPED) >> >> Total run count -------------> 0 >> >> Last test testing type ------> n/a >> >> Last test execution time ----> n/a >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> n/a >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 5) TestLoopback: >> >> >> >> Port 1 2 >> >> ---------- >> >> . . >> >> >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:14:21 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:14:21 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 6) TestNewIndexLearn ---------------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:14:22 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:14:22 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 7) TestDontConditionalLearn --------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:14:22 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:14:22 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 8) TestBadBpduTrap -----------------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:14:22 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:14:22 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 9) TestMatchCapture ----------------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:14:23 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:14:23 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 10) TestProtocolMatchChannel --------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:14:24 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:14:24 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 11) TestFibDevices ------------------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:14:25 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:14:25 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 12) TestIPv4FibShortcut -------------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:14:25 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:14:25 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 13) TestL3Capture2 ------------------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:14:25 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:14:25 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 14) TestIPv6FibShortcut -------------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:14:26 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:14:26 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 15) TestMPLSFibShortcut -------------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:14:26 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:14:26 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 16) TestNATFibShortcut --------------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:14:26 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:14:26 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 17) TestAclPermit -------------------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:14:26 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:14:26 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 18) TestQoSTcam ---------------------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:14:27 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:14:27 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 19) TestL3VlanMet -------------------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:14:27 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:14:27 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 20) TestIngressSpan -----------------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:14:27 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:14:27 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 21) TestEgressSpan ------------------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:14:27 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:14:27 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 22) TestNetflowInlineRewrite: >> >> >> >> Port 1 2 >> >> ---------- >> >> U U >> >> >> >> >> >> Error code ------------------> 3 (DIAG_SKIPPED) >> >> Total run count -------------> 0 >> >> Last test testing type ------> n/a >> >> Last test execution time ----> n/a >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> n/a >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 23) TestFabricSnakeForward ----------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:14:27 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:14:27 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 24) TestFabricSnakeBackward ---------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:14:27 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:14:27 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 25) TestTrafficStress ---------------> U >> >> >> >> Error code ------------------> 3 (DIAG_SKIPPED) >> >> Total run count -------------> 0 >> >> Last test testing type ------> n/a >> >> Last test execution time ----> n/a >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> n/a >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 26) TestFibTcamSSRAM ----------------> U >> >> >> >> Error code ------------------> 3 (DIAG_SKIPPED) >> >> Total run count -------------> 0 >> >> Last test testing type ------> n/a >> >> Last test execution time ----> n/a >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> n/a >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 27) TestAsicMemory ------------------> U >> >> >> >> Error code ------------------> 3 (DIAG_SKIPPED) >> >> Total run count -------------> 0 >> >> Last test testing type ------> n/a >> >> Last test execution time ----> n/a >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> n/a >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 28) TestAclQosTcam ------------------> U >> >> >> >> Error code ------------------> 3 (DIAG_SKIPPED) >> >> Total run count -------------> 0 >> >> Last test testing type ------> n/a >> >> Last test execution time ----> n/a >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> n/a >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 29) TestNetflowTcam -----------------> U >> >> >> >> Error code ------------------> 3 (DIAG_SKIPPED) >> >> Total run count -------------> 0 >> >> Last test testing type ------> n/a >> >> Last test execution time ----> n/a >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> n/a >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 30) ScheduleSwitchover --------------> U >> >> >> >> Error code ------------------> 3 (DIAG_SKIPPED) >> >> Total run count -------------> 0 >> >> Last test testing type ------> n/a >> >> Last test execution time ----> n/a >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> n/a >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 31) FirmwareDiagStatus --------------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:14:28 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:14:28 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 32) TestFabricFlowControlStatus -----> U >> >> >> >> Error code ------------------> 3 (DIAG_SKIPPED) >> >> Total run count -------------> 0 >> >> Last test testing type ------> n/a >> >> Last test execution time ----> n/a >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> n/a >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> Current run count -------------------------->: 0 >> >> First test execution time ------------------>: >> >> Last test execution time ------------------->: >> >> Total FPOE Rate0 Count --------------------->: 0 >> >> Total FPOE Reduced Rate Count -------------->: 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 33) TestErrorCounterMonitor ---------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 34753 >> >> Last test testing type ------> Health Monitoring >> >> Last test execution time ----> Nov 21 2011 20:04:05 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 21 2011 20:04:05 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> Error Records ---------------> n/a >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> >> >> Module 8: 4-subslot SPA Interface Processor-400 SerialNo : JAE1125MAUY >> >> >> >> Overall Diagnostic Result for Module 8 : PASS >> >> Diagnostic level at card bootup: minimal >> >> >> >> Test results: (. = Pass, F = Fail, U = Untested) >> >> >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 1) BusConnectivityTest -------------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 486479 >> >> Last test testing type ------> Health Monitoring >> >> Last test execution time ----> Nov 21 2011 20:04:16 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 21 2011 20:04:16 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 2) TestEobcStressPing --------------> U >> >> >> >> Error code ------------------> 3 (DIAG_SKIPPED) >> >> Total run count -------------> 0 >> >> Last test testing type ------> n/a >> >> Last test execution time ----> n/a >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> n/a >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> 3) TestFirmwareDiagStatus ----------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:15:24 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:15:24 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> >> >> >> ___________________________________________________________________________ >> >> >> >> >> >> Module 8/0: 5xGE SPA SerialNo : JAE141003QJ SerialNo : >> >> JAE1125MAUY >> >> >> >> Overall Diagnostic Result for Module 8/0 : PASS >> >> Diagnostic level at card bootup: minimal >> >> >> >> Test results: (. = Pass, F = Fail, U = Untested) >> >> >> >> >> >> ___________________________________________________________________ >> >> >> >> 1) TestSpaScratchRegister ----------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:15:29 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:15:29 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> ___________________________________________________________________ >> >> >> >> 2) PortLoopbackTest: >> >> >> >> Port 1 2 3 4 5 >> >> ------------------- >> >> U U U U U >> >> >> >> >> >> Error code ------------------> 3 (DIAG_SKIPPED) >> >> Total run count -------------> 0 >> >> Last test testing type ------> n/a >> >> Last test execution time ----> n/a >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> n/a >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> ___________________________________________________________________ >> >> >> >> >> >> Module 8/1: 4xOC3 POS SPA SerialNo : JAE12046H75 SerialNo : >> >> JAE1125MAUY >> >> >> >> Overall Diagnostic Result for Module 8/1 : PASS >> >> Diagnostic level at card bootup: minimal >> >> >> >> Test results: (. = Pass, F = Fail, U = Untested) >> >> >> >> >> >> ___________________________________________________________________ >> >> >> >> 1) TestSpaScratchRegister ----------> . >> >> >> >> Error code ------------------> 0 (DIAG_SUCCESS) >> >> Total run count -------------> 1 >> >> Last test testing type ------> Bootup >> >> Last test execution time ----> Nov 08 2011 18:15:30 >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> Nov 08 2011 18:15:30 >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> ___________________________________________________________________ >> >> >> >> 2) PortLoopbackTest: >> >> >> >> Port 1 2 3 4 >> >> ---------------- >> >> U U U U >> >> >> >> >> >> Error code ------------------> 3 (DIAG_SKIPPED) >> >> Total run count -------------> 0 >> >> Last test testing type ------> n/a >> >> Last test execution time ----> n/a >> >> First test failure time -----> n/a >> >> Last test failure time ------> n/a >> >> Last test pass time ---------> n/a >> >> Total failure count ---------> 0 >> >> Consecutive failure count ---> 0 >> >> >> >> ___________________________________________________________________ >> >> ! >> >> ====================================== >> >> 3560Switch#sh ver >> >> C3560 Software (C3560-IPSERVICESK9-M), Version 15.0(1)SE, RELEASE >> SOFTWARE >> >> (fc1) >> >> cisco WS-C3560G-24TS (PowerPC405) processor (revision F0) with 131072K >> >> bytes of memory. >> >> Processor board ID FOC1518Y4VP >> >> Last reset from power-on >> >> 3 Virtual Ethernet interfaces >> >> 28 Gigabit Ethernet interfaces >> >> The password-recovery mechanism is enabled. >> >> >> >> 512K bytes of flash-simulated non-volatile configuration memory. >> >> Base ethernet MAC Address : E8:BA:70:EB:A6:80 >> >> Motherboard assembly number : 73-10215-06 >> >> Power supply part number : 341-0098-02 >> >> Motherboard serial number : FOC151805NM >> >> Power supply serial number : AZS15180166 >> >> Model revision number : F0 >> >> Motherboard revision number : A0 >> >> Model number : WS-C3560G-24TS-S >> >> System serial number : FOC1518Y4VP >> >> Top Assembly Part Number : 800-26851-03 >> >> Top Assembly Revision Number : C0 >> >> Version ID : V05 >> >> CLEI Code Number : COMB200BRA >> >> Hardware Board Revision Number : 0x09 >> >> >> >> >> >> Switch Ports Model SW Version SW >> >> Image >> >> ------ ----- ----- ---------- >> >> ---------- >> >> * 1 28 WS-C3560G-24TS 15.0(1)SE >> >> C3560-IPSERVICESK9-M >> >> >> >> >> >> Configuration register is 0xF >> >> ! >> >> 3560Switch#sr int g0/22 >> >> Building configuration... >> >> >> >> Current configuration : 176 bytes >> >> ! >> >> interface GigabitEthernet0/22 >> >> no switchport >> >> ip address 192.168.1.2 255.255.255.252 >> >> ip ospf network point-to-point >> >> ip ospf hello-interval 2 >> >> ip ospf dead-interval 20 >> >> ! >> >> 3560Switch#sh int g0/22 >> >> GigabitEthernet0/22 is up, line protocol is up (connected) >> >> Hardware is Gigabit Ethernet, address is e8ba.70eb.a6d1 (bia >> >> e8ba.70eb.a6d1) >> >> Internet address is 192.168.1.2/30 >> >> MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, >> >> reliability 255/255, txload 9/255, rxload 8/255 >> >> Encapsulation ARPA, loopback not set >> >> Keepalive set (10 sec) >> >> Full-duplex, 1000Mb/s, media type is 10/100/1000BaseTX >> >> input flow-control is off, output flow-control is unsupported >> >> ARP type: ARPA, ARP Timeout 04:00:00 >> >> Last input 00:00:00, output 00:00:00, output hang never >> >> Last clearing of "show interface" counters never >> >> Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: >> 434 >> >> Queueing strategy: fifo >> >> Output queue: 0/40 (size/max) >> >> 5 minute input rate 31592000 bits/sec, 7630 packets/sec >> >> 5 minute output rate 37916000 bits/sec, 43189 packets/sec >> >> 9857764843 packets input, 5428762085664 bytes, 0 no buffer >> >> Received 623660 broadcasts (0 IP multicasts) >> >> 0 runts, 0 giants, 0 throttles >> >> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored >> >> 0 watchdog, 622706 multicast, 0 pause input >> >> 0 input packets with dribble condition detected >> >> 10000621950 packets output, 3259212102360 bytes, 0 underruns >> >> 0 output errors, 0 collisions, 1 interface resets >> >> 0 unknown protocol drops >> >> 0 babbles, 0 late collision, 0 deferred >> >> 0 lost carrier, 0 no carrier, 0 pause output >> >> 0 output buffer failures, 0 output buffers swapped out >> >> ! >> >> 3560Switch#ping 192.168.1.1 rep 100000000 tim 1 >> >> !!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Omitted about 5000 >> >> pings >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!..!!!!!!!.!!!!!!!!!.!!.!!!!!.....!!!..! >> >> ......!!!!!!!!!!!!!!!!!!!!!!!..!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> >> >> >> This ping output is exactly the same when I try to ping 192.168.1.2 >> from >> >> 7609 >> >> At the moment of problem, I try to ping both devices using the Mikrotik >> >> device which is in between, and at that time ping time increases >> including >> >> some request time-out. >> >> Thanks a lot and so sorry for such a long question. >> >> _______________________________________________ >> >> For more information regarding industry leading CCIE Lab training, >> please >> >> visit www.ipexpert.com >> >> >> >> Are you a CCNP or CCIE and looking for a job? Check out >> >> www.PlatinumPlacement.com >> >> >> >> To Unsubscribe from this list please visit the following link and >> follow >> >> the directions to unsubscribe. >> >> http://onlinestudylist.com/mailman/listinfo/ccie_rs >> >> >> > >> > >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> >> To Unsubscribe from this list please visit the following link and follow >> the directions to unsubscribe. >> http://onlinestudylist.com/mailman/listinfo/ccie_rs >> > > > > -- > -- > Olugbenga Oyebande > MD, DAIT > 234-803-302-5287 > http://www.dait-ng.com > Cisco Unified Network, VPN > DAIT Enterprise Network Servers > Broadband Internet Deployment & ISP Consultancy > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com To Unsubscribe from this list please visit the following link and follow the directions to unsubscribe. http://onlinestudylist.com/mailman/listinfo/ccie_rs
