ip ospf mtu-ignore Best Regards,
Elie ________________________________________ From: [email protected] [[email protected]] on behalf of khaled al-ajeman [[email protected]] Sent: Sunday, March 18, 2012 1:43 PM To: [email protected] Subject: [OSL | CCIE_RS] Hi there hi guys, my CAT1 AND R6 are not forming neighborship between each other? cat1 router ospf 1 router-id 10.10.11.11 log-adjacency-changes passive-interface default no passive-interface FastEthernet0/0 network 10.10.10.10 0.0.0.0 area 111 network 111.111.111.111 0.0.0.0 area 111 interface Tunnel0 ip address 10.10.10.10 255.255.255.0 tunnel source 150.100.113.111 tunnel destination 150.100.113.6 R6 R6(config)#do sh run int tunnel0 Building configuration... Current configuration : 127 bytes ! interface Tunnel0 ip address 10.10.10.6 255.255.255.0 tunnel source 150.100.113.6 tunnel destination 150.100.113.111 end R6#sh run | s os hostname R6 ip ospf cost 4713 ip ospf network non-broadcast ip ospf priority 0 router ospf 1 router-id 10.10.6.6 log-adjacency-changes network 10.10.6.6 0.0.0.0 area 0 network 10.10.10.6 0.0.0.0 area 111 network 150.100.100.6 0.0.0.0 area 0 network 150.100.169.0 0.0.0.255 area 69 regards, khaled _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
