Correction: cat1: router ospf 1 no passive-interface tunn 0 On Sun, Mar 18, 2012 at 11:12 AM, chuck mcfadden <[email protected]> wrote:
> cat1: > router ospf 1 > no passive-interface tunn 111 > > Chuck > On Sun, Mar 18, 2012 at 7:43 AM, khaled al-ajeman < > [email protected]> wrote: > >> hi guys, >> >> my CAT1 AND R6 are not forming neighborship between each other? >> >> cat1 >> >> router ospf 1 >> router-id 10.10.11.11 >> log-adjacency-changes >> passive-interface default >> no passive-interface FastEthernet0/0 >> network 10.10.10.10 0.0.0.0 area 111 >> network 111.111.111.111 0.0.0.0 area 111 >> interface Tunnel0 >> ip address 10.10.10.10 255.255.255.0 >> tunnel source 150.100.113.111 >> tunnel destination 150.100.113.6 >> >> R6 >> >> R6(config)#do sh run int tunnel0 >> Building configuration... >> Current configuration : 127 bytes >> ! >> interface Tunnel0 >> ip address 10.10.10.6 255.255.255.0 >> tunnel source 150.100.113.6 >> tunnel destination 150.100.113.111 >> end >> R6#sh run | s os >> hostname R6 >> ip ospf cost 4713 >> ip ospf network non-broadcast >> ip ospf priority 0 >> router ospf 1 >> router-id 10.10.6.6 >> log-adjacency-changes >> network 10.10.6.6 0.0.0.0 area 0 >> network 10.10.10.6 0.0.0.0 area 111 >> network 150.100.100.6 0.0.0.0 area 0 >> network 150.100.169.0 0.0.0.255 area 69 >> regards, >> >> khaled >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> >> http://onlinestudylist.com/mailman/listinfo/ccie_rs >> > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
