Thanks Alexander, I should have mentioned I did wait for over 15mins and
still nothing.

Also, not sure if this makes a difference but the routes are being learned
by two separate RIPng processes.

Cheers
James

On Sun, Apr 15, 2012 at 5:32 PM, Alexander Halim <[email protected]>wrote:

> I think you need to wait as long as hold time before the worse route is
> installed in the RIB.
>
> Regards,
> Alexander Halim
>
> On Apr 15, 2012, at 2:17 PM, James Roc <[email protected]> wrote:
>
> > Hi All,
> >
> > I have a query regarding RIPng convergence (possibly same issue on RIPv2
> as
> > well). A router is receiving route1 and route2 via two separate
> interfaces
> > and the router selects the route with the lowest metric, lets say route1.
> >
> > When I increase the metric of route1 to be higher than route2, the router
> > does not switch over to use route2.
> >
> > It notes the worse metric in a syslog message but does not swith over to
> > the better route:
> >
> > *Mar  1 01:50:10.595: IPv6RT0: rip cisco275, Route add
> > 2000:1:1:1100::/64 [*worse
> > metric 6,* 2]
> >
> > show ipv6 rip database output:
> >
> > 2000:1:1:1100::/64, *metric 6, installed*
> >     Serial1/0.1/FE80::2, expires in 167 secs
> > 2000:1:1:1100::/64, *metric 3*
> >     Tunnel1/FE80::C008:6FF:FE89:0, expires in 169 secs
> >
> > The only way I can get it to switch over is to clear the route table.
> >
> > On the flip side, if I modify the metric of the worse route to be the
> best,
> > then the routing table flips over automatically.
> >
> > So it looks when the metric of an installed route is increased, there is
> no
> > preemptive switch.
> >
> > However, when the metric of a worse route is decreased to be the best,
> then
> > the routing table is updated with the new route.
> >
> > Is this the expected operation of RIP?
> >
> > Cheers
> > James
> > _______________________________________________
> > For more information regarding industry leading CCIE Lab training,
> please visit www.ipexpert.com
> >
> > Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
> >
> > http://onlinestudylist.com/mailman/listinfo/ccie_rs
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

http://onlinestudylist.com/mailman/listinfo/ccie_rs

Reply via email to