do a show ip eigrp topology it should be in the rib, these are the best routes to the destination passed into the routing table only.
post your outputs.. Tony On 25 September 2012 14:10, Amit Jp <[email protected]> wrote: > Hi all, > > I have configured eigrp on three routers. > The three routers are interconnected (Fully meshed). > > I have not disabled summarization. > i Used network 172.16.10.0/24 ,10.10.10.0/24 and 192.168.1.0/24 > > Say i login into any one router: and i see the routing table of it > > D 172.16.10.0/24 [90/2681856] via 192.168.1.2, 00:00:08, Serial1/1 > D 172.16.0.0/16 [90/2681856] via 10.10.10.2, 00:00:21, Serial1/0 > > I need to understand why 172.16.10.0/24 is learnin from 192.168.1.2 and > 172.16.0.0/16 via 10.10.10.2. > shouldnt it learn both the routes from just one router 192.168.1.2 > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
