hi Amit,

Since you are having a mesh topology with 3 routers, then there will be 2
paths for each network going from 1 each router.
If will run the command show ip eigrp topology, than you can see all the
available paths.
You are getting 2 paths in your routing table because both the routes have
same metrics, therefore load-balancing will work.

 D       172.16.10.0/24 [90/2681856] via 192.168.1.2, 00:00:08, Serial1/1
 D       172.16.0.0/16 [90/2681856] via 10.10.10.2, 00:00:21, Serial1/0

Hope this will help you.

Regards
Arafat Khaliq


On Tue, Sep 25, 2012 at 7:06 PM, Tony Singh <[email protected]> wrote:
> do a show ip eigrp topology it should be in the rib, these are the best
> routes to the destination passed into the routing table only.
>
> post your outputs..
>
> Tony
>
> On 25 September 2012 14:10, Amit Jp <[email protected]> wrote:
>
>> Hi all,
>>
>> I have configured eigrp on three routers.
>> The three routers are interconnected (Fully meshed).
>>
>> I have not disabled summarization.
>> i Used network 172.16.10.0/24 ,10.10.10.0/24 and 192.168.1.0/24
>>
>> Say i login  into any one router: and i see the routing table of it
>>
>> D       172.16.10.0/24 [90/2681856] via 192.168.1.2, 00:00:08, Serial1/1
>> D       172.16.0.0/16 [90/2681856] via 10.10.10.2, 00:00:21, Serial1/0
>>
>> I need to understand why 172.16.10.0/24 is learnin from 192.168.1.2 and
>> 172.16.0.0/16 via 10.10.10.2.
>> shouldnt it learn both the routes from just one router 192.168.1.2
>> _______________________________________________
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>> http://onlinestudylist.com/mailman/listinfo/ccie_rs
>>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
>
> http://onlinestudylist.com/mailman/listinfo/ccie_rs



-- 
Regards
Arafat Khaliq
(+91-9717581177)
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

http://onlinestudylist.com/mailman/listinfo/ccie_rs

Reply via email to