ok so on r9
D 10.0.0.0/8 [90/2681856] via 192.168.1.1, 00:10:19, Serial1/1
[90/2681856] via 172.16.10.1, 00:10:19, Serial1/0
10.x network is being load balanced as khaliq said as it is equal cost -
this is most likely with the aid of cef per destination load balancing
(create many loops backs then source pings from them to test)
on r7
D 192.168.1.0/24 [90/2681856] via 172.16.10.2, 00:13:34, Serial1/1
[90/2681856] via 10.10.10.1, 00:13:34, Serial1/0
192.x network has equal cost paths as well again will be load-balanced via
cef
HTH
Tony
On 25 September 2012 15:21, Amit Jp <[email protected]> wrote:
> Here is the show run and sh ip route
>
> Router>
> Router>
> Router>
> Router>
> Router>en
> Router#
> Router#
> Router#
> Router9#sh run
> Building configuration...
>
> Current configuration : 1101 bytes
> !
> version 12.4
> service timestamps debug datetime msec
> service timestamps log datetime msec
> no service password-encryption
> !
> hostname Router
> !
> boot-start-marker
> boot-end-marker
> !
> !
> no aaa new-model
> !
> resource policy
> !
> memory-size iomem 5
> !
> !
> ip cef
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> interface FastEthernet0/0
> no ip address
> shutdown
> duplex auto
> speed auto
> !
> interface FastEthernet0/1
> no ip address
> shutdown
> duplex auto
> speed auto
> !
> interface Serial1/0
> ip address 172.16.10.2 255.255.255.0
> serial restart-delay 0
> no dce-terminal-timing-enable
> !
> interface Serial1/1
> ip address 192.168.1.2 255.255.255.0
> serial restart-delay 0
> no dce-terminal-timing-enable
> !
> interface Serial1/2
> no ip address
> shutdown
> serial restart-delay 0
> no dce-terminal-timing-enable
> !
> interface Serial1/3
> no ip address
> shutdown
> serial restart-delay 0
> no dce-terminal-timing-enable
> !
> router eigrp 1
> network 172.16.10.0 0.0.0.255
> network 192.168.1.0
> no auto-summary
> !
> ip http server
> no ip http secure-server
> !
> !
> !
> !
> !
> !
> control-plane
> !
> !
> !
> !
> !
> !
> !
> !
> !
> line con 0
> line aux 0
> line vty 0 4
> !
> !
> end
>
>
>
>
>
> Router 9#sh ip route
> Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
> D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
> E1 - OSPF external type 1, E2 - OSPF external type 2
> i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS
> level-2
> ia - IS-IS inter area, * - candidate default, U - per-user static
> route
> o - ODR, P - periodic downloaded static route
>
> Gateway of last resort is not set
>
> 172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
> C 172.16.10.0/24 is directly connected, Serial1/0
> D 172.16.0.0/16 [90/3193856] via 192.168.1.1, 00:10:19, Serial1/1
> D 10.0.0.0/8 [90/2681856] via 192.168.1.1, 00:10:19, Serial1/1
> [90/2681856] via 172.16.10.1, 00:10:19, Serial1/0
> C 192.168.1.0/24 is directly connected, Serial1/1
> 11111----------------------------
> ----------------------------------------
> --------------------------------------------------------
> ----------------------------------------------------------
> -
> ============================
>
> --------------------------------------------------------------------------------------------------++++=============================
>
>
>
>
>
>
>
> Router 7
>
>
> Router#sh run
> Building configuration...
>
> Current configuration : 1096 bytes
> !
> version 12.4
> service timestamps debug datetime msec
> service timestamps log datetime msec
> no service password-encryption
> !
> hostname Router
> !
> boot-start-marker
> boot-end-marker
> !
> !
> no aaa new-model
> !
> resource policy
> !
> memory-size iomem 5
> !
> !
> ip cef
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> interface FastEthernet0/0
> no ip address
> shutdown
> duplex auto
> speed auto
> !
> interface FastEthernet0/1
> no ip address
> shutdown
> duplex auto
> speed auto
> !
> interface Serial1/0
> ip address 10.10.10.1 255.255.255.0
> serial restart-delay 0
> no dce-terminal-timing-enable
> !
> interface Serial1/1
> ip address 192.168.1.1 255.255.255.0
> serial restart-delay 0
> no dce-terminal-timing-enable
> !
> interface Serial1/2
> no ip address
> shutdown
> serial restart-delay 0
> no dce-terminal-timing-enable
> !
> interface Serial1/3
> no ip address
> shutdown
> serial restart-delay 0
> no dce-terminal-timing-enable
> !
> router eigrp 1
> network 10.10.10.0 0.0.0.255
> network 192.168.1.0
> auto-summary
> !
> ip http server
> no ip http secure-server
> !
> !
> !
> !
> !
> !
> control-plane
> !
> !
> !
> !
> !
> !
> !
> !
> !
> line con 0
> line aux 0
> line vty 0 4
> !
> !
> end
>
>
>
> Gateway of last resort is not set
>
> 172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
> D 172.16.10.0/24 [90/2681856] via 192.168.1.2, 00:11:50, Serial1/1
> D 172.16.0.0/16 [90/2681856] via 10.10.10.2, 00:12:04, Serial1/0
> 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
> C 10.10.10.0/24 is directly connected, Serial1/0
> D 10.0.0.0/8 is a summary, 00:11:50, Null0
> C 192.168.1.0/24 is directly connected, Serial1/1
>
>
>
> --------------------------------------------------------------------
> -----------------------------------------------------------------
> --------------------------------------------------------------------------
>
>
> Router 8
>
> r>
> Router>
> Router>
> Router>
> Router>
> Router>
> Router>
> Router>
> Router>en
> Router#sh run
> Building configuration...
>
> Current configuration : 1106 bytes
> !
> version 12.4
> service timestamps debug datetime msec
> service timestamps log datetime msec
> no service password-encryption
> !
> hostname Router
> !
> boot-start-marker
> boot-end-marker
> !
> !
> no aaa new-model
> !
> resource policy
> !
> memory-size iomem 5
> !
> !
> ip cef
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> interface FastEthernet0/0
> no ip address
> shutdown
> duplex auto
> speed auto
> !
> interface FastEthernet0/1
> no ip address
> shutdown
> duplex auto
> speed auto
> !
> interface Serial1/0
> ip address 10.10.10.2 255.255.255.0
> serial restart-delay 0
> no dce-terminal-timing-enable
> !
> interface Serial1/1
> ip address 172.16.10.1 255.255.255.0
> serial restart-delay 0
> no dce-terminal-timing-enable
> !
> interface Serial1/2
> no ip address
> shutdown
> serial restart-delay 0
> no dce-terminal-timing-enable
> !
> interface Serial1/3
> no ip address
> shutdown
> serial restart-delay 0
> no dce-terminal-timing-enable
> !
> router eigrp 1
> network 10.10.10.0 0.0.0.255
> network 172.16.10.0 0.0.0.255
> auto-summary
> !
> ip http server
> no ip http secure-server
> !
> !
> !
> !
> !
> !
> control-plane
> !
> !
> !
> !
> !
> !
> !
> !
> !
> line con 0
> line aux 0
> line vty 0 4
> !
> !
> end
>
>
>
>
> odes: C - connected, S - static, R - RIP, M - mobile, B - BGP
> D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
> E1 - OSPF external type 1, E2 - OSPF external type 2
> i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS
> level-2
> ia - IS-IS inter area, * - candidate default, U - per-user static
> route
> o - ODR, P - periodic downloaded static route
>
> Gateway of last resort is not set
>
> 172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
> C 172.16.10.0/24 is directly connected, Serial1/1
> D 172.16.0.0/16 is a summary, 00:13:34, Null0
> 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
> C 10.10.10.0/24 is directly connected, Serial1/0
> D 10.0.0.0/8 is a summary, 00:17:13, Null0
> D 192.168.1.0/24 [90/2681856] via 172.16.10.2, 00:13:34, Serial1/1
> [90/2681856] via 10.10.10.1, 00:13:34, Serial1/0
>
>
>
>
>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
