Thanks Guys! I ll investigate more..
AH --- On Tue, 6/17/08, Turpin, Mark <[EMAIL PROTECTED]> wrote: > From: Turpin, Mark <[EMAIL PROTECTED]> > Subject: RE: [OSL | CCIE_Voice] AAR Problem! > To: [EMAIL PROTECTED], "OSL CCIE Voice Lab Exam" > <ccie_voice@onlinestudylist.com>, "Jacob Owen" <[EMAIL PROTECTED]> > Date: Tuesday, June 17, 2008, 1:26 PM > Earlier TEHO routes were brought up. Now that you've > mentioned you don't have partitions/css's can you > double-check to see if you have any TEHO routes? > > In the event of congestion AAR kicks in and finds the best > route - the TEHO route - pointing across the WAN and fails > the call. What you need is to get the TEHO routes out of > AAR's CSS, even if it is <None>. > > > -- > > MARK TURPIN | Senior Consultant - UC | Calence / > Insight Networking Solutions | www.calence.com > t. 314.656.2315 c. 314.660.5800 f. 314.656.2355 > [EMAIL PROTECTED] > The information contained in this message and any > attachment may contain privileged or confidential > information protected from disclosure. If you are not the > intended recipient, or an employee or agent responsible for > delivering this message to the intended recipient, you are > hereby notified that any review, dissemination, > distribution or copying of this information is strictly > prohibited. If you have received this transmission in > error, please notify the sender immediately by replying to > this message and destroying the original and all copies. > Thank you. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf > Of Ahmed Hamed > Sent: Monday, June 16, 2008 2:17 PM > To: Jacob Owen > Cc: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] AAR Problem! > > > Hi Jacob, > > I haven't configured any CSSs or partitions. This means > anybody can call anybody. > > Thanks, > > AH > > --- On Mon, 6/16/08, Jacob Owen > <[EMAIL PROTECTED]> wrote: > > > From: Jacob Owen <[EMAIL PROTECTED]> > > Subject: Re: [OSL | CCIE_Voice] AAR Problem! > > To: [EMAIL PROTECTED], "OSL CCIE Voice Lab > Exam" <ccie_voice@onlinestudylist.com> > > Date: Monday, June 16, 2008, 6:39 PM > > Ahmed, > > Does the calling phone have the Long Distance > > Partition as part of it's CSS? > > > > --- Ahmed Hamed <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > ccievoice1, > > > > > > What if I don't have a CSS or a partition > defined > > > anywhere?.... Not even an AAR CSS! > > > > > > Is it a requirement to have an AAR CSS defined? > > > > > > Thanks, > > > > > > AH > > > > > > > > > > > > --- On Mon, 6/16/08, ccievoice1 > > > <[EMAIL PROTECTED]> wrote: > > > > > > > From: ccievoice1 > <[EMAIL PROTECTED]> > > > > Subject: Re: [OSL | CCIE_Voice] AAR Problem! > > > > To: [EMAIL PROTECTED], "OSL CCIE Voice > Lab > > Exam" > > > <ccie_voice@onlinestudylist.com> > > > > Date: Monday, June 16, 2008, 1:26 PM > > > > Well, > > > > > > > > I will always check and verify the calling > search > > > space and > > > > the partition. > > > > Also, I will make sure that I have the AAR > Group, > > > AAR CSS > > > > and the External > > > > Phone Mask configured on my ip phones. Lets > not > > > forget AAR > > > > Group and AAR CSS > > > > on the gateway as well. > > > > > > > > HTH > > > > > > > > On Mon, Jun 16, 2008 at 9:10 PM, Ahmed Hamed > > > > <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > > > > > > > > > Hi ccievoice1, > > > > > > > > > > Thank you for your reply. > > > > > > > > > > > > > > > I dont's think there is a typo > below, > > but > > > possibly > > > > a "mistake" :) > > > > > > > > > > so... > > > > > > > > > > HQ-AAR should have same prefix as > original > > route > > > > pattern e.g. 91 and > > > > > 9.16175222XXX > > > > > > > > > > BUT I have it correct in the other way > > around > > > > > > > > > > i.e. > > > > > > > > > > Br1-AAR ..... prefix:91 with HQ-AAR > > > > > > > > > > and original route pattern is > 9.12122221xxx > > > > > > > > > > Any clue? > > > > > > > > > > AH > > > > > > > > > > > > > > > --- On Mon, 6/16/08, ccievoice1 > > > > <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > From: ccievoice1 > > <[EMAIL PROTECTED]> > > > > > > Subject: Re: [OSL | CCIE_Voice] > AAR > > Problem! > > > > > > To: [EMAIL PROTECTED], "OSL > CCIE > > Voice Lab > > > > Exam" < > > > > > ccie_voice@onlinestudylist.com> > > > > > > Date: Monday, June 16, 2008, 8:20 > AM > > > > > > Hi, > > > > > > > > > > > > Not sure if it is typo error. You > have > > AAR > > > prefix > > > > 9 with > > > > > > BR1 while your > > > > > > route pattern to BR1 is > 916175222XXX > > > > > > > > > > > > IF it is not a typo, then with > your AAR > > Prefix > > > + > > > > BR1 > > > > > > External Phone Mask = > > > > > > 96175222002 which didn't match > your > > BR1 Route > > > > Pattern. > > > > > > > > > > > > Br1-AAR ..... prefix:91 with > HQ-AAR > > > > > > HQ-AAR ..... *prefix: 9* with > BR1-AAR > > > > > > > > > > > > HQ phone dn [1001, 2122221001] > > > > > > BR1 phone dn [2002, 6175222002] > > > > > > > > > > > > > > > > > > Route patterns configured: > > > > > > 9.12122221xxx > > > > > > 9.16175222xxx > > > > > > > > > > > > HTH > > > > > > > > > > > > On Mon, Jun 16, 2008 at 3:48 AM, > Ahmed > > Hamed > > > > > > <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > I have a problem with AAR.. > > > > > > > > > > > > > > HQ phone is configured with > > location HQ-L > > > > > > > Br1 phone is configured with > > location BR1-L > > > > > > > > > > > > > > > > > > > > > AAR groups are configured as > > follows: > > > > > > > > > > > > > > Br1-AAR ..... prefix:91 with > > HQ-AAR > > > > > > > HQ-AAR ..... prefix: 9 with > > BR1-AAR > > > > > > > > > > > > > > HQ phone dn [1001, > 2122221001] > > > > > > > BR1 phone dn [2002, > 6175222002] > > > > > > > > > > > > > > > > > > > > > Route patterns configured: > > > > > > > 9.12122221xxx > > > > > > > 9.16175222xxx > > > > > > > > > > > > > > pointing to 6608 gw. > > > > > > > > > > > > > > Problem: Whenever I reduce > > location HQ-L, I > > > > try to > > > > > > reach destination > > > > > > > hqphone from BR1 phone, and I > get > > a fast > > > > busy tone.. > > > > > > > > > > > > > > I am not sure where the > problem > > is.. Could > > > > anyone give > > > > > > me a hint? > > > > > > > > > > > > > > Note: Under normal > conditions, I > > can reach > > > > hqphone > > > > > > from Br1 phone thru 6608 > > > > > > > gw if I use hq phone's > > external mask as > > > > a > > > > > > destination.. > > > > > > > > > > > > > > > > > > > > > Thanks, > > > > > > > > > > > > > > AH > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Jacob Owen > > CCIE #14063 (R&S, Service Provider), CCVP, CCDP