Hi Jacob, I haven't configured any CSSs or partitions. This means anybody can call anybody.
Thanks, AH --- On Mon, 6/16/08, Jacob Owen <[EMAIL PROTECTED]> wrote: > From: Jacob Owen <[EMAIL PROTECTED]> > Subject: Re: [OSL | CCIE_Voice] AAR Problem! > To: [EMAIL PROTECTED], "OSL CCIE Voice Lab Exam" > <ccie_voice@onlinestudylist.com> > Date: Monday, June 16, 2008, 6:39 PM > Ahmed, > Does the calling phone have the Long Distance > Partition as part of it's CSS? > > --- Ahmed Hamed <[EMAIL PROTECTED]> wrote: > > > > > > > ccievoice1, > > > > What if I don't have a CSS or a partition defined > > anywhere?.... Not even an AAR CSS! > > > > Is it a requirement to have an AAR CSS defined? > > > > Thanks, > > > > AH > > > > > > > > --- On Mon, 6/16/08, ccievoice1 > > <[EMAIL PROTECTED]> wrote: > > > > > From: ccievoice1 <[EMAIL PROTECTED]> > > > Subject: Re: [OSL | CCIE_Voice] AAR Problem! > > > To: [EMAIL PROTECTED], "OSL CCIE Voice Lab > Exam" > > <ccie_voice@onlinestudylist.com> > > > Date: Monday, June 16, 2008, 1:26 PM > > > Well, > > > > > > I will always check and verify the calling search > > space and > > > the partition. > > > Also, I will make sure that I have the AAR Group, > > AAR CSS > > > and the External > > > Phone Mask configured on my ip phones. Lets not > > forget AAR > > > Group and AAR CSS > > > on the gateway as well. > > > > > > HTH > > > > > > On Mon, Jun 16, 2008 at 9:10 PM, Ahmed Hamed > > > <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > > > > > Hi ccievoice1, > > > > > > > > Thank you for your reply. > > > > > > > > > > > > I dont's think there is a typo below, > but > > possibly > > > a "mistake" :) > > > > > > > > so... > > > > > > > > HQ-AAR should have same prefix as original > route > > > pattern e.g. 91 and > > > > 9.16175222XXX > > > > > > > > BUT I have it correct in the other way > around > > > > > > > > i.e. > > > > > > > > Br1-AAR ..... prefix:91 with HQ-AAR > > > > > > > > and original route pattern is 9.12122221xxx > > > > > > > > Any clue? > > > > > > > > AH > > > > > > > > > > > > --- On Mon, 6/16/08, ccievoice1 > > > <[EMAIL PROTECTED]> wrote: > > > > > > > > > From: ccievoice1 > <[EMAIL PROTECTED]> > > > > > Subject: Re: [OSL | CCIE_Voice] AAR > Problem! > > > > > To: [EMAIL PROTECTED], "OSL CCIE > Voice Lab > > > Exam" < > > > > ccie_voice@onlinestudylist.com> > > > > > Date: Monday, June 16, 2008, 8:20 AM > > > > > Hi, > > > > > > > > > > Not sure if it is typo error. You have > AAR > > prefix > > > 9 with > > > > > BR1 while your > > > > > route pattern to BR1 is 916175222XXX > > > > > > > > > > IF it is not a typo, then with your AAR > Prefix > > + > > > BR1 > > > > > External Phone Mask = > > > > > 96175222002 which didn't match your > BR1 Route > > > Pattern. > > > > > > > > > > Br1-AAR ..... prefix:91 with HQ-AAR > > > > > HQ-AAR ..... *prefix: 9* with BR1-AAR > > > > > > > > > > HQ phone dn [1001, 2122221001] > > > > > BR1 phone dn [2002, 6175222002] > > > > > > > > > > > > > > > Route patterns configured: > > > > > 9.12122221xxx > > > > > 9.16175222xxx > > > > > > > > > > HTH > > > > > > > > > > On Mon, Jun 16, 2008 at 3:48 AM, Ahmed > Hamed > > > > > <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > I have a problem with AAR.. > > > > > > > > > > > > HQ phone is configured with > location HQ-L > > > > > > Br1 phone is configured with > location BR1-L > > > > > > > > > > > > > > > > > > AAR groups are configured as > follows: > > > > > > > > > > > > Br1-AAR ..... prefix:91 with > HQ-AAR > > > > > > HQ-AAR ..... prefix: 9 with > BR1-AAR > > > > > > > > > > > > HQ phone dn [1001, 2122221001] > > > > > > BR1 phone dn [2002, 6175222002] > > > > > > > > > > > > > > > > > > Route patterns configured: > > > > > > 9.12122221xxx > > > > > > 9.16175222xxx > > > > > > > > > > > > pointing to 6608 gw. > > > > > > > > > > > > Problem: Whenever I reduce > location HQ-L, I > > > try to > > > > > reach destination > > > > > > hqphone from BR1 phone, and I get > a fast > > > busy tone.. > > > > > > > > > > > > I am not sure where the problem > is.. Could > > > anyone give > > > > > me a hint? > > > > > > > > > > > > Note: Under normal conditions, I > can reach > > > hqphone > > > > > from Br1 phone thru 6608 > > > > > > gw if I use hq phone's > external mask as > > > a > > > > > destination.. > > > > > > > > > > > > > > > > > > Thanks, > > > > > > > > > > > > AH > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Jacob Owen > CCIE #14063 (R&S, Service Provider), CCVP, CCDP