If the call is going through the gatekeeper, REMOVE all bandwidth CAC, shut/no shut the gatekeeper and try this again.

Vik Malhi – CCIE #13890
Senior Technical Instructor - IPexpert, Inc.

Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: [EMAIL PROTECTED]

Join our free online support and peer group communities:
http://www.IPexpert.com/communities
IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On- Demand and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications.



On Oct 3, 2008, at 7:16 AM, Balamurugan Singaram wrote:


yes I have try as follows: but it is not working, could please let mke know the workaroud for this problem.

voice-tran-r 1
rule 1 /4#4400/ /4400/

voice trans-pr bacd
trans called 1

dial-peer  voice 101 voip
incoming called numbe 4#4400
dtmf-relay h245-al
codec g711ulaw

dial-peer voice 102 voip
dest-patt 4#4400
tran-pro out bacd
session target ipv4: 1.1.1.1 [ loopback IP of CME router]
dtmf-relay h245-alp
codec g711ulaw

dial-peer voice 103 voip
service aa
incoming called-number 4400
dtmf-realy h245-alph
codec g711ulaw






--- On Fri, 3/10/08, Cardwell, Mark <[EMAIL PROTECTED]> wrote:
From: Cardwell, Mark <[EMAIL PROTECTED]>
Subject: RE: [OSL | CCIE_Voice] BACD Issue
To: [EMAIL PROTECTED]
Date: Friday, 3 October, 2008, 7:26 PM


What happens when you call from HQ? Also break out you dial-p into 2 not income called and destination-pattern on the same.


Cheers!



Mark Cardwell | Systems Engineer | MidAtlantic | Presidio Networked Solutions
7601 Ora Glen Drive, Suite 100, Greenbelt, MD  20770 | [EMAIL PROTECTED]
D: 571.225.0132 | www.presidio.com


From: Balamurugan Singaram [mailto:[EMAIL PROTECTED]
Sent: Friday, October 03, 2008 9:54 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED];ccie_voice@onlinestudylist.com ; Cardwell, Mark
Subject: Re: [OSL | CCIE_Voice] BACD Issue


I have upload call BACD in CME, when I call BACD from PSTN and CME IPPhone it works fine, but when I call the BACD script from HQ the BACD is not working, even the CODEC is g711ulaw between HQ and CME.



Could please let me know what I am missing or any workaround to make BACD to work from HQ to CME.

--- On Fri, 3/10/08, Cardwell, Mark <[EMAIL PROTECTED]> wrote:

From: Cardwell, Mark <[EMAIL PROTECTED]>
Subject: Re: [OSL | CCIE_Voice] BACD Issue
To: [EMAIL PROTECTED], [EMAIL PROTECTED],ccie_voice@onlinestudylist.com
Date: Friday, 3 October, 2008, 5:12 PM



Did you reload to application? Or just reload the router


Mark Cardwell | Systems Engineer | MidAtlantic | Presidio Networked Solutions
7601 Ora Glen Drive, Suite 100, Greenbelt, MD  20770 |[EMAIL PROTECTED]
D: 571.225.0132 | www.presidio.com


From: [EMAIL PROTECTED]
To: Edi Hamlet ; ccie_voice@onlinestudylist.com
Sent: Thu Oct 02 23:49:56 2008
Subject: Re: [OSL | CCIE_Voice] BACD Issue

I had both POTS and VOIP dial-peer . Same results on both pots and VOIP.



Cheers

Narinder



From: Edi Hamlet [mailto:[EMAIL PROTECTED]
Sent: Friday, 3 October 2008 1:44 PM
To: Kumar, Narinder; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] BACD Issue



where did you attach the aa application? on POTS or VOIP dial peer?

Try to verify the AA service by calling from IP Phone registered to CME directly to AA pilot number. Create VOIP dial peer in order for IP Phone to be able to call to AA pilot number

!
dial-peer voice 4000 voip
 service aa
 incoming called-number 4000
 destination-pattern 4000
 session target ipv4:<loopback or CME ip address>
 codec g711ulaw
 no vad
 dtmf-relay h245-alphanumeric
!

I think AA service will work fine and you will hear welcome prompt if all AA parameters are set correctly with correct spelling.



----- Original Message ----
From: "Kumar, Narinder" <[EMAIL PROTECTED]>
To: Edi Hamlet <[EMAIL PROTECTED]>; "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
Sent: Friday, October 3, 2008 10:16:48 AM
Subject: RE: [OSL | CCIE_Voice] BACD Issue

Initially I had “_bacd_welcome.au” instead of “en_bacd_welcome.au”, I had the same issue with en_bacd_welcome.au

As well.



Cheers

Narinder



From: Edi Hamlet [mailto:[EMAIL PROTECTED]
Sent: Friday, 3 October 2008 1:13 PM
To: Kumar, Narinder; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] BACD Issue



you should strip you welcome prompt name in param welcome-prompt to _bacd_welcome.au instead of en_bacd_welcome.au



----- Original Message ----
From: "Kumar, Narinder" <[EMAIL PROTECTED]>
To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
Sent: Friday, October 3, 2008 8:51:06 AM
Subject: [OSL | CCIE_Voice] BACD Issue

I don't hear any welcome message after 20 sec the IVR start playing..

1. for sales

2. for customer service

3. for Dial by Extn





I have configured   1 for HG 1, 2 for HG 2  and 4 to dial by extn



But my BACD IVR plays 3 for Dial by Extn...



Below is the config



application

 service aa flash:app-b-acd-aa-2.1.2.2.tcl

  paramspace english language en

  paramspace english index 1

  paramspace english location flash:

  param service-name queue

  param handoff-string aa

  param aa-pilot 4000

  param number-of-hunt-grps 2

  param second-greeting-time 30

  param call-retry-timer 15

  param max-time-call-retry 600

  param voice-mail 4600

  param max-time-vm-retry 2

  param dial-by-extension-option 4

  param max-extension-length 4

  param welcome-prompt en_bacd_welcome.au

   param menu-timeout 6





 service queue flash:app-b-acd-2.1.2.2.tcl

  param queue-len 10

  param number-of-hunt-grps 2

  param aa-hunt1 4111



  param aa-hunt2 4222

  param queue-manager-debugs 1



Flash File :

22   18836    app-b-acd-2.1.2.2-ReadMe.txt

 23   24985    app-b-acd-2.1.2.2.tcl

 24   35485    app-b-acd-aa-2.1.2.2.tcl

 25   75650    en_bacd_allagentsbusy.au

 26   83291    en_bacd_disconnect.au

 27   63055    en_bacd_enter_dest.au

 28   37952    en_bacd_invalidoption.au

 29   496521   en_bacd_music_on_hold.au

 30   123446   en_bacd_options_menu.au

 31   42978    en_bacd_welcome.au

 32   34794    en_bacd_xferto_operator.au





CONFIDENTIALITY - The information contained in this electronic mail message is confidential and is intended solely for the addressee(s). If you are not an authorised recipient of this message please contact Getronics Australia immediately by reply email and destroy/ delete this message from your computer. Any unauthorised form of reproduction of this message, or part thereof, is strictly prohibited. DISCLAIMER - Unless specifically indicated otherwise, the views and opinions expressed in this email are those of the sender and not Getronics Australia. While we endeavour to protect our network from computer viruses, Getronics Australia does not warrant that this email or any attachments are free of viruses or any other defects or errors. It is the duty of the recipient to virus scan and otherwise test any information contained in this email before loading onto any computer system.





CONFIDENTIALITY - The information contained in this electronic mail message is confidential and is intended solely for the addressee(s). If you are not an authorised recipient of this message please contact Getronics Australia immediately by reply email and destroy/ delete this message from your computer. Any unauthorised form of reproduction of this message, or part thereof, is strictly prohibited. DISCLAIMER - Unless specifically indicated otherwise, the views and opinions expressed in this email are those of the sender and not Getronics Australia. While we endeavour to protect our network from computer viruses, Getronics Australia does not warrant that this email or any attachments are free of viruses or any other defects or errors. It is the duty of the recipient to virus scan and otherwise test any information contained in this email before loading onto any computer system.





CONFIDENTIALITY - The information contained in this electronic mail message is confidential and is intended solely for the addressee(s). If you are not an authorised recipient of this message please contact Getronics Australia immediately by reply email and destroy/ delete this message from your computer. Any unauthorised form of reproduction of this message, or part thereof, is strictly prohibited. DISCLAIMER - Unless specifically indicated otherwise, the views and opinions expressed in this email are those of the sender and not Getronics Australia. While we endeavour to protect our network from computer viruses, Getronics Australia does not warrant that this email or any attachments are free of viruses or any other defects or errors. It is the duty of the recipient to virus scan and otherwise test any information contained in this email before loading onto any computer system.



New Email addresses available on Yahoo!
Get the Email name you've always wanted on the new @ymail and @rocketmail.
Hurry before someone else does!


Get your new Email address!
Grab the Email name you've always wanted before someone else does!

New Email addresses available on Yahoo!
Get the Email name you've always wanted on the new @ymail and @rocketmail.
Hurry before someone else does!

Reply via email to