It will work, provided it has a higher preference value than what defined under max-dn.
Regards, Shadab -----Original Message----- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jose Gregorio Linero (jlinero) Sent: Tuesday, December 16, 2008 8:29 AM To: James Key; anil...@yahoo.com; Ryan Trauernicht Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Alias command not working in SRST Hi: Alias commando will not work with non registered phones, you have to find another way. Regards, Jose -----Original Message----- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of James Key Sent: Lunes, 15 de Diciembre de 2008 08:58 a.m. To: anil...@yahoo.com; Ryan Trauernicht Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Alias command not working in SRST I don't believe Alias with work if you have dialplan-pattern defined. James -----Original Message----- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of anil batra Sent: Monday, December 15, 2008 1:13 AM To: Ryan Trauernicht Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Alias command not working in SRST Hi Ryan, Sorry for my delayed repsponse as was out on a project, Here is what I am trying to test and my configs please. May be if Vik or Mark can put more lights on this one please...as I ma stuck here. Call a number say "2002" which is not registerd in SRST mode , only "2001" is regosterd, Now I am trying ot use the alias command tro forweard the calls coming to "2002" to HQ number 212 223 1001 My doubt is "will it the Alias command work for any un-registered phone or will I have to have the phone 2002 registred to SRST first and then use alias command to forward it to some other number. So I am lost in what case the alias commned will work please. here is my config for you reference..... call-manager-fallback max-conferences 2 gain -6 transfer-system full-consult ip source-address 10.2.201.1 port 2000 max-ephones 1 max-dn 2 preference 2 sdspfarm units 2 sdspfarm transcode sessions 3 dialplan-pattern 1 6175222... extension-length 4 transfer-pattern .T keepalive 10 voicemail 12122221600 alias 2 2002 to 2002 cfw 912122221001 timeout 10 call-forward pattern .T call-forward busy 12122221600 call-forward noan 12122221600 timeout 10 moh music-on-hold.au I have tried it without dialpattern command too abd using transaltion profiles at voice-port but no luck.. Kinldy help... Thanks, Anil --- On Mon, 12/8/08, Ryan Trauernicht <ryanstudyvo...@gmail.com> wrote: > From: Ryan Trauernicht <ryanstudyvo...@gmail.com> > Subject: Re: [OSL | CCIE_Voice] Alias command not working in SRST > To: anil...@yahoo.com > Cc: ccie_voice@onlinestudylist.com > Date: Monday, December 8, 2008, 7:10 AM What are you trying to do > here... ring 2002 then call forward noan to that DID? I can't > remember off the top of my head the order in which things are matched > against. If you have a DN on a phone that is registered in SRST as > 2002, it might match that and ring before it hits your alias commands > and that is why it is not working. I would double check on that. > > You can test by calling is 2003 (that isnt a DN on a phone) to alias > that to > 2002 with cfw to the DID. > > See if that works. > > Thanks, > Ryan Trauernicht > > On Thu, Dec 4, 2008 at 9:55 PM, anil batra <anil...@yahoo.com> wrote: > > > Hello Experts, > > > > I tried several times to use alias command in SRST but > without any lcuk. > > > > Here is what I did - > > > > ON CCM - created two DP- one for srst and non-srst and > applied to BR1 ph1 > > ad ph2 respectively. > > > > ON BR1 router- > > call-manager-fallback > > alias i 2002 to 2002 prefernce 1 cfw 912122231001 > > > > > > I do have dial-peer for long distnce call to HQ phone > 2122231001 > > > > I tired with dial-pattern command and without but no > luck. > > > > Any help on this will be higly apreciated. > > > > Thanks, > > Anil > > > > > > > > > > > > > > NOTICE: This electronic mail message and any files transmitted with it are intended exclusively for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged information. Any unauthorized review, use, printing, saving, copying, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies.
