Hi,
I have the NM-2CE1T1-PRI card, i was wondering if this can be used for voice
as i'm not getting the port when i try specifying the port in pots dial-peer
I configured :
!
Isdn switchtype primary-net5
!
voice type e1 2/0
!
controller e1 2/0
pri-group timeslots 1-31
no crc-4
no shut
!
Interface serial 2/0:15
Isdn incoming-voice voice
Isdn overlap-receiving
No shut
!
Dial-peer voice 1 pots
Destination-p 2.......
Port 2/0:15
^
Unrecorgnized command
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Cliff McGlamry
Sent: 24 February 2009 22:18
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Time management strategies
I'm curious about how others are planning their time for the labs.
In reading through the lab, it seems to me that it is best to go through and
do all the drawings, dial plan design, etc. at the beginning. This means
you might be spending a bit more time on it, but in my experience, an hour
spent planning generally saves two or more.
I'd be interested to know if other folks are doing their dial plan table at
the same time they do their drawing of the network, or what.
Cliff
