hi usually we r requested to use g729 between sites and g711 within sites, my question is about tis command: voice class codec 1 codec preference 1 g729r8 codec preference 2 g711ulaw when we have h323 gateway on BR1, can we use this command on BR1 h323 gateway for both dial peers pointing to CCM: dial-peer voice 3000 voip destination-pattern 2... session target ipv4:SUB voice-class h323 1 voice-class codec 1 dtmf-relay h245-alphan no vad dial-peer voice 3001 voip destination-pattern 2... session target ipv4:PUB voice-class h323 1 voice-class codec 1 dtmf-relay h245-alphan preference 2 no vad note: 2... is BR1 site extensions using voice class codec here, does it violate the task of g729 only between sites?
