You've got the preference backwards. In order to force it to G711 within the site, you'll need to have g711ulaw as preference 1. On the inter site link, it will negotiate down based on bandwidth. It won't negotiate "up".
Cliff ----- Original Message ----- From: ccie Me To: [email protected] Sent: Monday, March 30, 2009 3:07 PM Subject: [OSL | CCIE_Voice] voice class codec hi usually we r requested to use g729 between sites and g711 within sites, my question is about tis command: voice class codec 1 codec preference 1 g729r8 codec preference 2 g711ulaw when we have h323 gateway on BR1, can we use this command on BR1 h323 gateway for both dial peers pointing to CCM: dial-peer voice 3000 voip destination-pattern 2... session target ipv4:SUB voice-class h323 1 voice-class codec 1 dtmf-relay h245-alphan no vad dial-peer voice 3001 voip destination-pattern 2.... session target ipv4:PUB voice-class h323 1 voice-class codec 1 dtmf-relay h245-alphan preference 2 no vad note: 2... is BR1 site extensions using voice class codec here, does it violate the task of g729 only between sites?
