Bill,
I believe it is, I have not been able to find any information to say
otherwise.
Quoting Bill Talley <bill.tal...@aos5.com>:
Is 'load 7960-7940 P003-08-9-00' valid for a sccp device?
-----Original Message-----
From: Amp [mailto:amccar...@cciequest.com]
Sent: Thursday, June 18, 2009 7:04 PM
To: Bill Talley
Cc: Aamir Panjwani; CCIE-Voice
Subject: RE: [OSL | CCIE_Voice] Need Help, SCCP Ephone Will Not Register
Hey Bill,
Nothing has the .50 address, I have tried to get the phone to drop the
.51 address to see if it would pick up the .50 but it is a stubborn
lil thing. There's only one leased address and that's the .51 that the
phone has.
BR2-RTR#sh ip dhcp pool
Pool CME :
Utilization mark (high/low) : 100 / 0
Subnet size (first/next) : 0 / 0
Total addresses : 254
Leased addresses : 1
Pending event : none
1 subnet is currently in the pool :
Current index IP address range Leased addresses
10.10.202.1 10.10.202.1 - 10.10.202.254 1
BR2-RTR#
Quoting Bill Talley <bill.tal...@aos5.com>:
What has the .50 ip address?
Sent from a mobile phone with very tiny touchscreen keys. Please
excuse my typos.
-----Original Message-----
From: Amp <amccar...@cciequest.com>
Sent: Thursday, June 18, 2009 6:08 PM
To: Aamir Panjwani <aamir.panjw...@ivision.com.au>
Cc: CCIE-Voice <ccie_voice@onlinestudylist.com>
Subject: Re: [OSL | CCIE_Voice] Need Help, SCCP Ephone Will Not Register
Hey Aamir,
Yeah I debugged tftp events and I see that it looks for the files,
finds them, and opens them, and as far as DHCP the phone gets an IP
address in the range that is being allowed in the DHCP config.
BR2-RTR(config-ephone)#do sh run | sec dhcp
ip dhcp excluded-address 10.10.202.1 10.10.202.49
ip dhcp excluded-address 10.10.202.70 10.10.202.254
ip dhcp pool CME
network 10.10.202.0 255.255.255.0
default-router 10.10.202.1
option 150 ip 10.10.110.3
BR2-RTR(config-ephone)#
BR2-RTR(config-ephone)#do sh ip dhcp bind
Bindings from all pools not associated with VRF:
IP address Client-ID/ Lease expiration Type
Hardware address/
User name
10.10.202.51 0100.1bd4.c6c1.36 Jun 20 2009 01:06 AM
Automatic
BR2-RTR(config-ephone)#
BR2-RTR#sh cdp nei f0/3/0 det
-------------------------
Device ID: SEP001BD4C6C136
Entry address(es):
IP address: 10.10.202.51
Platform: Cisco IP Phone 7960, Capabilities: Host
Interface: FastEthernet0/3/0, Port ID (outgoing port): Port 1
Holdtime : 179 sec
Version :
P003-08-9-00
advertisement version: 2
Duplex: full
Power drawn: 6.300 Watts
BR2-RTR#
Quoting Aamir Panjwani <aamir.panjw...@ivision.com.au>:
Make sure phone can get to DHCP/TFTP. Also try changing max ephone and
max dn to higher value. Double check phone type and mac address is
correct :)
Debug tftp events
Debug ip dhcp server events
-----Original Message-----
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Amp
Sent: Friday, 19 June 2009 8:49 AM
To: CCIE-Voice
Subject: [OSL | CCIE_Voice] Need Help, SCCP Ephone Will Not Register
Hey Gang,
I am having some trouble with getting the Br2 SCCP phone to register
after I go through the telephony-service setup and configure
everything according to section 1.8 of Lab1A. A debug ephone register
doesn't return anything. I have reset and restarted the phone to no
success. Anyone have any ideas on what else I can check to figure this
out?
Here's a copy of the telephony-service config:
BR2-RTR#sh run | sec tele
telephony-service
em logout 0:0 0:0 0:0
max-ephones 1
max-dn 1
ip source-address 10.10.110.3 port 2000
auto assign 1 to 1
network-locale ES
network-locale 1 ES
network-locale 2 ES
network-locale 3 ES
network-locale 4 ES
load 7960-7940 P003-08-9-00
max-conferences 8 gain -6
transfer-system full-consult
create cnf-files version-stamp 7960 Jun 19 2009 00:12:38
BR2-RTR#sh run | sec ephone
max-ephones 1
ephone-dn 1 dual-line
number 3001
ephone 1
no phone-ui speeddial-fastdial
no multicast-moh
mac-address 001B.D4C6.C136
keepalive 30 auxiliary 0
codec g729r8 pre-ietf
type 7960
button 1:1
BR2-RTR#
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
