Sorry....You're working V3, not V2. My bad. Ok. Try this. Change port 0/3/0 to an access port on VLAN 400. See if it will come up.
-------------------------------------------------- From: "Amp" <amccar...@cciequest.com> Sent: Thursday, June 18, 2009 10:31 PM To: "Cliff McGlamry" <cl...@mcglamry.net> Cc: "Larry Hadrava" <lar...@ipexpert.com>; <ms...@ipexpert.com>; "CCIE-Voice" <ccie_voice@onlinestudylist.com>; <vma...@ipexpert.com> Subject: Re: [OSL | CCIE_Voice] Need Help, SCCP Ephone Will Not Register This is Branch2, it has the ESW and is not connected to the 3750. The 3750 is connected to HQ-RTR. The VLANS are correct, take a look at the Volume 1 - Lab Tables document. Quoting Cliff McGlamry <cl...@mcglamry.net>: > DUDE!!!! > > > The VLAN numbers on your switch don't match what's on the router!!!! It > will never come up that way!!! > > > -------------------------------------------------- > From: "Amp" <amccar...@cciequest.com> > Sent: Thursday, June 18, 2009 10:22 PM > To: "Cliff McGlamry" <cl...@mcglamry.net> > Cc: "Larry Hadrava" <lar...@ipexpert.com>; <ms...@ipexpert.com>; > "CCIE-Voice" <ccie_voice@onlinestudylist.com>; <vma...@ipexpert.com> > Subject: Re: [OSL | CCIE_Voice] Need Help, SCCP Ephone Will Not Register > > Sounds like a good idea Cliff. > > BR2-RTR: > =========================== > version 12.4 > service timestamps debug datetime msec > service timestamps log datetime msec > no service password-encryption > ! > hostname BR2-RTR > ! > boot-start-marker > boot system flash:c2800nm-adventerprisek9-mz.124-22.T.bin > warm-reboot > boot-end-marker > ! > logging message-counter syslog > logging buffered 4096 > ! > no aaa new-model > memory-size iomem 20 > clock timezone CET 1 > clock summer-time CET recurring 1 Sun Apr 1:00 last Sun Oct 1:00 > network-clock-participate wic 0 > no network-clock-participate wic 1 > ! > dot11 syslog > ip source-route > ! > ! > ip cef > ip dhcp excluded-address 10.10.202.1 10.10.202.49 > ip dhcp excluded-address 10.10.202.70 10.10.202.254 > ! > ip dhcp pool CME > network 10.10.202.0 255.255.255.0 > option 150 ip 10.10.110.3 > default-router 10.10.202.1 > ! > ! > no ip domain lookup > no ipv6 cef > multilink bundle-name authenticated > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > voice-card 0 > ! > ! > ! > ! > ! > archive > log config > hidekeys > ! > ! > controller E1 0/0/0 > ! > controller E1 0/0/1 > ! > controller T1 0/1/0 > channel-group 0 timeslots 1-24 > ! > ! > ! > ! > ! > interface Loopback0 > ip address 10.10.110.3 255.255.255.255 > ip ospf network point-to-point > ! > interface FastEthernet0/0 > no ip address > shutdown > duplex auto > speed auto > ! > interface Service-Engine0/0 > no ip address > shutdown > ! > interface FastEthernet0/1 > no ip address > shutdown > duplex auto > speed auto > ! > interface FastEthernet0/3/0 > switchport trunk native vlan 200 > switchport mode trunk > switchport voice vlan 400 > ! > interface FastEthernet0/3/1 > shutdown > ! > interface FastEthernet0/3/2 > shutdown > ! > interface FastEthernet0/3/3 > shutdown > ! > interface Serial0/1/0:0 > no ip address > encapsulation frame-relay IETF > no fair-queue > frame-relay lmi-type ansi > ! > interface Serial0/1/0:0.1 point-to-point > ip address 10.10.112.2 255.255.255.0 > ip ospf mtu-ignore > snmp trap link-status > frame-relay interface-dlci 102 > ! > interface Vlan1 > no ip address > ! > interface Vlan200 > ip address 10.10.102.1 255.255.255.0 > ! > interface Vlan400 > ip address 10.10.202.1 255.255.255.0 > ! > router ospf 1 > router-id 10.10.202.1 > log-adjacency-changes > network 10.10.0.0 0.0.255.255 area 0 > ! > ip forward-protocol nd > ! > ip http server > ip http authentication local > no ip http secure-server > ! > ! > ! > ! > ! > tftp-server flash:P00307010100.bin > tftp-server flash:P003-8-12-00.bin > tftp-server flash:P003-8-12-00.sbn > tftp-server flash:P003-08-10-00.bin > tftp-server flash:P003-07-5-00.bin > tftp-server flash:P003-07-5-00.sbn > tftp-server flash:P003-08-10-00.sbn > tftp-server flash:P003-08-6-00.bin > tftp-server flash:P003-08-6-00.sbn > tftp-server flash:P003-08-7-00.bin > tftp-server flash:P003-08-7-00.sbn > tftp-server flash:P003-08-9-00.bin > tftp-server flash:P003-08-9-00.sbn > tftp-server flash:PHONE/7940-7960/P00308000500.bin alias P00308000500.bin > tftp-server flash:PHONE/7940-7960/P00308000500.loads alias > P00308000500.loads > tftp-server flash:PHONE/7940-7960/P00308000500.sb2 alias P00308000500.sb2 > tftp-server flash:PHONE/7940-7960/P00308000500.sbn alias P00308000500.sbn > tftp-server flash:PHONE/7940-7960/P0S3-08-9-00.loads alias > P0S3-08-6-00.loads > tftp-server flash:PHONE/7940-7960/P0S3-08-9-00.sb2 alias P0S3-08-6-00.sb2 > tftp-server flash:PHONE/7940-7960/P003-08-9-00.bin alias P003-08-6-00.bin > tftp-server flash:PHONE/7940-7960/P003-08-9-00.sbn alias P003-08-6-00.sbn > ! > control-plane > ! > ! > ! > ccm-manager fax protocol cisco > ! > mgcp fax t38 ecm > ! > ! > ! > ! > ! > telephony-service > no auto-reg-ephone > em logout 0:0 0:0 0:0 > max-ephones 1 > max-dn 1 > ip source-address 10.10.110.3 port 2000 > auto assign 1 to 1 > network-locale ES > network-locale 1 ES > network-locale 2 ES > network-locale 3 ES > network-locale 4 ES > load 7960-7940 P003-08-9-00 > time-format 24 > date-format dd-mm-yy > max-conferences 8 gain -6 > transfer-system full-consult > create cnf-files version-stamp 7960 Jun 19 2009 04:04:07 > ! > ! > ephone-dn 1 dual-line > number 3001 > ! > ! > ephone 1 > no phone-ui speeddial-fastdial > no multicast-moh > mac-address 001B.D4C6.C136 > codec g729r8 > type 7960 > button 1:1 > ! > ! > ! > line con 0 > exec-timeout 0 0 > logging synchronous > line aux 0 > line 194 > no activation-character > no exec > transport preferred none > transport input all > transport output all > line vty 0 4 > exec-timeout 0 0 > privilege level 15 > logging synchronous > no login > transport preferred none > transport input telnet > line vty 5 15 > exec-timeout 0 0 > privilege level 15 > logging synchronous > no login > transport preferred none > transport input telnet > ! > scheduler allocate 20000 1000 > ntp server 10.10.100.2 > end > ================================================== > HQ-3750 > > no service pad > service timestamps debug uptime > service timestamps log uptime > no service password-encryption > ! > hostname HQ-3750 > ! > boot-start-marker > boot-end-marker > ! > ! > no aaa new-model > switch 1 provision ws-c3750-24p > system mtu routing 1500 > ip subnet-zero > ip routing > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > spanning-tree mode pvst > spanning-tree extend system-id > ! > vlan internal allocation policy ascending > ! > ! > ! > ! > interface FastEthernet1/0/1 > switchport trunk encapsulation dot1q > switchport trunk native vlan 10 > switchport mode trunk > ! > interface FastEthernet1/0/2 > switchport access vlan 10 > switchport mode access > switchport voice vlan 20 > spanning-tree portfast > ! > interface FastEthernet1/0/3 > ! > interface FastEthernet1/0/4 > switchport access vlan 30 > switchport mode access > speed 100 > duplex half > ! > interface FastEthernet1/0/5 > ! > interface FastEthernet1/0/6 > ! > interface FastEthernet1/0/7 > ! > interface FastEthernet1/0/8 > ! > interface FastEthernet1/0/9 > ! > interface FastEthernet1/0/10 > ! > interface FastEthernet1/0/11 > ! > interface FastEthernet1/0/12 > ! > interface FastEthernet1/0/13 > ! > interface FastEthernet1/0/14 > ! > interface FastEthernet1/0/15 > ! > interface FastEthernet1/0/16 > ! > interface FastEthernet1/0/17 > ! > interface FastEthernet1/0/18 > ! > interface FastEthernet1/0/19 > ! > interface FastEthernet1/0/20 > ! > interface FastEthernet1/0/21 > ! > interface FastEthernet1/0/22 > ! > interface FastEthernet1/0/23 > ! > interface FastEthernet1/0/24 > description *** DO NOT CHANGE - THIS IS YOUR L3 CONNECTION TO YOUR > VPN!!! > *** > switchport access vlan 10 > switchport mode access > speed 100 > duplex full > no cdp enable > ! > interface GigabitEthernet1/0/1 > ! > interface GigabitEthernet1/0/2 > ! > interface Vlan1 > no ip address > ! > interface Vlan10 > ip address 10.10.100.3 255.255.255.0 > ! > ip classless > ip route 0.0.0.0 0.0.0.0 10.10.100.1 > ip http server > no ip http secure-server > ! > ! > ! > control-plane > ! > ! > line con 0 > exec-timeout 0 0 > logging synchronous > line vty 0 4 > exec-timeout 0 0 > privilege level 15 > logging synchronous > no login > line vty 5 15 > exec-timeout 0 0 > privilege level 15 > logging synchronous > no login > ! > end > ==================================== > > Here's some other output that may be helpful: > > BR2-RTR# sh ephone > > ephone-1[0] Mac:001B.D4C6.C136 TCP socket:[-1] activeLine:0 UNREGISTERED > mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 > caps:0 > IP:10.10.202.51 51057 Unknown 0 keepalive 0 max_line 0 > Preferred Codec: g729 > > BR2-RTR# > > BR2-RTR#sh ip int brie > Interface IP-Address OK? Method Status > Protocol > FastEthernet0/0 unassigned YES TFTP administratively > down down > Service-Engine0/0 unassigned YES TFTP administratively > down down > FastEthernet0/1 unassigned YES TFTP administratively > down down > FastEthernet0/3/0 unassigned YES unset up > up > FastEthernet0/3/1 unassigned YES unset administratively > down down > FastEthernet0/3/2 unassigned YES unset administratively > down down > FastEthernet0/3/3 unassigned YES unset administratively > down down > Serial0/1/0:0 unassigned YES TFTP up > up > Serial0/1/0:0.1 10.10.112.2 YES manual up > up > Vlan1 unassigned YES TFTP up > up > Vlan200 10.10.102.1 YES manual up > up > Vlan400 10.10.202.1 YES manual up > up > Loopback0 10.10.110.3 YES manual up > up > BR2-RTR# > > > BR2-RTR#sh vlan-sw br > > VLAN Name Status Ports > ---- -------------------------------- --------- > ------------------------------- > 1 default active Fa0/3/1, Fa0/3/2, Fa0/3/3 > 200 DATA active > 400 PHONES active > 1002 fddi-default act/unsup > 1003 token-ring-default act/unsup > 1004 fddinet-default act/unsup > 1005 trnet-default act/unsup > BR2-RTR# > > BR2-RTR#sh vlan-sw id 400 > > VLAN Name Status Ports > ---- -------------------------------- --------- > ------------------------------- > 400 PHONES active Fa0/3/0 > > VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 > Trans2 > ---- ----- ---------- ----- ------ ------ -------- ---- -------- > ------ ------ > 400 enet 100400 1500 - - - - - 0 0 > BR2-RTR#sh vlan-sw id 200 > > VLAN Name Status Ports > ---- -------------------------------- --------- > ------------------------------- > 200 DATA active Fa0/3/0 > > VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 > Trans2 > ---- ----- ---------- ----- ------ ------ -------- ---- -------- > ------ ------ > 200 enet 100200 1500 - - - - - 0 0 > BR2-RTR# > > Bindings from all pools not associated with VRF: > IP address Client-ID/ Lease expiration Type > Hardware address/ > User name > 10.10.202.51 0100.1bd4.c6c1.36 Jun 20 2009 04:21 AM > Automatic > BR2-RTR# > > > BR2-RTR#sh cdp nei f0/3/0 det > ------------------------- > Device ID: SEP001BD4C6C136 > Entry address(es): > IP address: 10.10.202.51 > Platform: Cisco IP Phone 7960, Capabilities: Host > Interface: FastEthernet0/3/0, Port ID (outgoing port): Port 1 > Holdtime : 166 sec > > Version : > P003-08-9-00 > > advertisement version: 2 > Duplex: full > Power drawn: 6.300 Watts > > BR2-RTR# > > BR2-RTR#sh int f0/3/0 switchport > Name: Fa0/3/0 > Switchport: Enabled > Administrative Mode: trunk > Operational Mode: trunk > Administrative Trunking Encapsulation: dot1q > Operational Trunking Encapsulation: dot1q > Negotiation of Trunking: Disabled > Access Mode VLAN: 0 ((Inactive)) > Trunking Native Mode VLAN: 200 (DATA) > Trunking VLANs Enabled: ALL > Trunking VLANs Active: 1,200,400 > Protected: false > Priority for untagged frames: 0 > Override vlan tag priority: FALSE > Voice VLAN: 400 > Appliance trust: none > BR2-RTR# > > > > > Quoting Cliff McGlamry <cl...@mcglamry.net>: > > Why don't you post the full config of both the router and the switch? > Let's get some eyes on it. > >