DUDE!!!!

The VLAN numbers on your switch don't match what's on the router!!!!   It 
will never come up that way!!!


--------------------------------------------------
From: "Amp" <amccar...@cciequest.com>
Sent: Thursday, June 18, 2009 10:22 PM
To: "Cliff McGlamry" <cl...@mcglamry.net>
Cc: "Larry Hadrava" <lar...@ipexpert.com>; <ms...@ipexpert.com>; 
"CCIE-Voice" <ccie_voice@onlinestudylist.com>; <vma...@ipexpert.com>
Subject: Re: [OSL | CCIE_Voice] Need Help, SCCP Ephone Will Not Register

Sounds like a good idea Cliff.

BR2-RTR:
===========================
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname BR2-RTR
!
boot-start-marker
boot system flash:c2800nm-adventerprisek9-mz.124-22.T.bin
warm-reboot
boot-end-marker
!
logging message-counter syslog
logging buffered 4096
!
no aaa new-model
memory-size iomem 20
clock timezone CET 1
clock summer-time CET recurring 1 Sun Apr 1:00 last Sun Oct 1:00
network-clock-participate wic 0
no network-clock-participate wic 1
!
dot11 syslog
ip source-route
!
!
ip cef
ip dhcp excluded-address 10.10.202.1 10.10.202.49
ip dhcp excluded-address 10.10.202.70 10.10.202.254
!
ip dhcp pool CME
    network 10.10.202.0 255.255.255.0
    option 150 ip 10.10.110.3
    default-router 10.10.202.1
!
!
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
voice-card 0
!
!
!
!
!
archive
  log config
   hidekeys
!
!
controller E1 0/0/0
!
controller E1 0/0/1
!
controller T1 0/1/0
  channel-group 0 timeslots 1-24
!
!
!
!
!
interface Loopback0
  ip address 10.10.110.3 255.255.255.255
  ip ospf network point-to-point
!
interface FastEthernet0/0
  no ip address
  shutdown
  duplex auto
  speed auto
!
interface Service-Engine0/0
  no ip address
  shutdown
!
interface FastEthernet0/1
  no ip address
  shutdown
  duplex auto
  speed auto
!
interface FastEthernet0/3/0
  switchport trunk native vlan 200
  switchport mode trunk
  switchport voice vlan 400
!
interface FastEthernet0/3/1
  shutdown
!
interface FastEthernet0/3/2
  shutdown
!
interface FastEthernet0/3/3
  shutdown
!
interface Serial0/1/0:0
  no ip address
  encapsulation frame-relay IETF
  no fair-queue
  frame-relay lmi-type ansi
!
interface Serial0/1/0:0.1 point-to-point
  ip address 10.10.112.2 255.255.255.0
  ip ospf mtu-ignore
  snmp trap link-status
  frame-relay interface-dlci 102
!
interface Vlan1
  no ip address
!
interface Vlan200
  ip address 10.10.102.1 255.255.255.0
!
interface Vlan400
  ip address 10.10.202.1 255.255.255.0
!
router ospf 1
  router-id 10.10.202.1
  log-adjacency-changes
  network 10.10.0.0 0.0.255.255 area 0
!
ip forward-protocol nd
!
ip http server
ip http authentication local
no ip http secure-server
!
!
!
!
!
tftp-server flash:P00307010100.bin
tftp-server flash:P003-8-12-00.bin
tftp-server flash:P003-8-12-00.sbn
tftp-server flash:P003-08-10-00.bin
tftp-server flash:P003-07-5-00.bin
tftp-server flash:P003-07-5-00.sbn
tftp-server flash:P003-08-10-00.sbn
tftp-server flash:P003-08-6-00.bin
tftp-server flash:P003-08-6-00.sbn
tftp-server flash:P003-08-7-00.bin
tftp-server flash:P003-08-7-00.sbn
tftp-server flash:P003-08-9-00.bin
tftp-server flash:P003-08-9-00.sbn
tftp-server flash:PHONE/7940-7960/P00308000500.bin alias P00308000500.bin
tftp-server flash:PHONE/7940-7960/P00308000500.loads alias 
P00308000500.loads
tftp-server flash:PHONE/7940-7960/P00308000500.sb2 alias P00308000500.sb2
tftp-server flash:PHONE/7940-7960/P00308000500.sbn alias P00308000500.sbn
tftp-server flash:PHONE/7940-7960/P0S3-08-9-00.loads alias 
P0S3-08-6-00.loads
tftp-server flash:PHONE/7940-7960/P0S3-08-9-00.sb2 alias P0S3-08-6-00.sb2
tftp-server flash:PHONE/7940-7960/P003-08-9-00.bin alias P003-08-6-00.bin
tftp-server flash:PHONE/7940-7960/P003-08-9-00.sbn alias P003-08-6-00.sbn
!
control-plane
!
!
!
ccm-manager fax protocol cisco
!
mgcp fax t38 ecm
!
!
!
!
!
telephony-service
  no auto-reg-ephone
  em logout 0:0 0:0 0:0
  max-ephones 1
  max-dn 1
  ip source-address 10.10.110.3 port 2000
  auto assign 1 to 1
  network-locale ES
  network-locale 1 ES
  network-locale 2 ES
  network-locale 3 ES
  network-locale 4 ES
  load 7960-7940 P003-08-9-00
  time-format 24
  date-format dd-mm-yy
  max-conferences 8 gain -6
  transfer-system full-consult
  create cnf-files version-stamp 7960 Jun 19 2009 04:04:07
!
!
ephone-dn  1  dual-line
  number 3001
!
!
ephone  1
  no phone-ui speeddial-fastdial
  no multicast-moh
  mac-address 001B.D4C6.C136
  codec g729r8
  type 7960
  button  1:1
!
!
!
line con 0
  exec-timeout 0 0
  logging synchronous
line aux 0
line 194
  no activation-character
  no exec
  transport preferred none
  transport input all
  transport output all
line vty 0 4
  exec-timeout 0 0
  privilege level 15
  logging synchronous
  no login
  transport preferred none
  transport input telnet
line vty 5 15
  exec-timeout 0 0
  privilege level 15
  logging synchronous
  no login
  transport preferred none
  transport input telnet
!
scheduler allocate 20000 1000
ntp server 10.10.100.2
end
==================================================
HQ-3750

no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname HQ-3750
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
switch 1 provision ws-c3750-24p
system mtu routing 1500
ip subnet-zero
ip routing
!
!
!
!
!
!
!
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
!
interface FastEthernet1/0/1
  switchport trunk encapsulation dot1q
  switchport trunk native vlan 10
  switchport mode trunk
!
interface FastEthernet1/0/2
  switchport access vlan 10
  switchport mode access
  switchport voice vlan 20
  spanning-tree portfast
!
interface FastEthernet1/0/3
!
interface FastEthernet1/0/4
  switchport access vlan 30
  switchport mode access
  speed 100
  duplex half
!
interface FastEthernet1/0/5
!
interface FastEthernet1/0/6
!
interface FastEthernet1/0/7
!
interface FastEthernet1/0/8
!
interface FastEthernet1/0/9
!
interface FastEthernet1/0/10
!
interface FastEthernet1/0/11
!
interface FastEthernet1/0/12
!
interface FastEthernet1/0/13
!
interface FastEthernet1/0/14
!
interface FastEthernet1/0/15
!
interface FastEthernet1/0/16
!
interface FastEthernet1/0/17
!
interface FastEthernet1/0/18
!
interface FastEthernet1/0/19
!
interface FastEthernet1/0/20
!
interface FastEthernet1/0/21
!
interface FastEthernet1/0/22
!
interface FastEthernet1/0/23
!
interface FastEthernet1/0/24
  description *** DO NOT CHANGE - THIS IS YOUR L3 CONNECTION TO YOUR VPN!!! 
***
  switchport access vlan 10
  switchport mode access
  speed 100
  duplex full
  no cdp enable
!
interface GigabitEthernet1/0/1
!
interface GigabitEthernet1/0/2
!
interface Vlan1
  no ip address
!
interface Vlan10
  ip address 10.10.100.3 255.255.255.0
!
ip classless
ip route 0.0.0.0 0.0.0.0 10.10.100.1
ip http server
no ip http secure-server
!
!
!
control-plane
!
!
line con 0
  exec-timeout 0 0
  logging synchronous
line vty 0 4
  exec-timeout 0 0
  privilege level 15
  logging synchronous
  no login
line vty 5 15
  exec-timeout 0 0
  privilege level 15
  logging synchronous
  no login
!
end
====================================

Here's some other output that may be helpful:

BR2-RTR# sh ephone

ephone-1[0] Mac:001B.D4C6.C136 TCP socket:[-1] activeLine:0 UNREGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 
caps:0
IP:10.10.202.51 51057 Unknown 0  keepalive 0 max_line 0
Preferred Codec: g729

BR2-RTR#

BR2-RTR#sh ip int brie
Interface                  IP-Address      OK? Method Status
      Protocol
FastEthernet0/0            unassigned      YES TFTP   administratively
down down
Service-Engine0/0          unassigned      YES TFTP   administratively
down down
FastEthernet0/1            unassigned      YES TFTP   administratively
down down
FastEthernet0/3/0          unassigned      YES unset  up 
up
FastEthernet0/3/1          unassigned      YES unset  administratively
down down
FastEthernet0/3/2          unassigned      YES unset  administratively
down down
FastEthernet0/3/3          unassigned      YES unset  administratively
down down
Serial0/1/0:0              unassigned      YES TFTP   up 
up
Serial0/1/0:0.1            10.10.112.2     YES manual up 
up
Vlan1                      unassigned      YES TFTP   up 
up
Vlan200                    10.10.102.1     YES manual up 
up
Vlan400                    10.10.202.1     YES manual up 
up
Loopback0                  10.10.110.3     YES manual up 
up
BR2-RTR#


BR2-RTR#sh vlan-sw br

VLAN Name                             Status    Ports
---- -------------------------------- ---------
-------------------------------
1    default                          active    Fa0/3/1, Fa0/3/2, Fa0/3/3
200  DATA                             active
400  PHONES                           active
1002 fddi-default                     act/unsup
1003 token-ring-default               act/unsup
1004 fddinet-default                  act/unsup
1005 trnet-default                    act/unsup
BR2-RTR#

BR2-RTR#sh vlan-sw id 400

VLAN Name                             Status    Ports
---- -------------------------------- ---------
-------------------------------
400  PHONES                           active    Fa0/3/0

VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 
Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
400  enet  100400     1500  -      -      -        -    -        0      0
BR2-RTR#sh vlan-sw id 200

VLAN Name                             Status    Ports
---- -------------------------------- ---------
-------------------------------
200  DATA                             active    Fa0/3/0

VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 
Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
200  enet  100200     1500  -      -      -        -    -        0      0
BR2-RTR#

Bindings from all pools not associated with VRF:
IP address          Client-ID/              Lease expiration        Type
                     Hardware address/
                     User name
10.10.202.51        0100.1bd4.c6c1.36       Jun 20 2009 04:21 AM 
Automatic
BR2-RTR#


BR2-RTR#sh cdp nei f0/3/0 det
-------------------------
Device ID: SEP001BD4C6C136
Entry address(es):
   IP address: 10.10.202.51
Platform: Cisco IP Phone 7960,  Capabilities: Host
Interface: FastEthernet0/3/0,  Port ID (outgoing port): Port 1
Holdtime : 166 sec

Version :
P003-08-9-00

advertisement version: 2
Duplex: full
Power drawn: 6.300 Watts

BR2-RTR#

BR2-RTR#sh int f0/3/0 switchport
Name: Fa0/3/0
Switchport: Enabled
Administrative Mode: trunk
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: Disabled
Access Mode VLAN: 0 ((Inactive))
Trunking Native Mode VLAN: 200 (DATA)
Trunking VLANs Enabled: ALL
Trunking VLANs Active: 1,200,400
Protected: false
Priority for untagged frames: 0
Override vlan tag priority: FALSE
Voice VLAN: 400
Appliance trust: none
BR2-RTR#




Quoting Cliff McGlamry <cl...@mcglamry.net>:

Why don't you post the full config of both the router and the switch?
Let's get some eyes on it. 

Reply via email to