oh, no , you can't use the bathroom without buying anything!! lol
________________________________ From: ccie_voice-boun...@onlinestudylist.com [ccie_voice-boun...@onlinestudylist.com] On Behalf Of Mark Holloway [...@markholloway.com] Sent: Tuesday, August 11, 2009 12:37 AM To: Mark Holloway Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem Sorry, I replied to the wrong email. Meant to say the same thing but in response to Art's email! :) On Aug 10, 2009, at 9:29 PM, Mark Holloway wrote: Thanks for sharing Art. This would make a great blog post. Again, congratulations! On Aug 10, 2009, at 8:47 PM, c george wrote: my typo yes I meant VOIP dial-peer is this working for you ? Respectfully Charles George ________________________________ From: mciarfe...@iplogic.com<mailto:mciarfe...@iplogic.com> To: cisco...@hotmail.com<mailto:cisco...@hotmail.com>; ccie_voice@onlinestudylist.com<mailto:ccie_voice@onlinestudylist.com> Date: Mon, 10 Aug 2009 23:24:45 -0400 Subject: RE: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem voip dial-peer not pots. ________________________________ From: c george [cisco...@hotmail.com<mailto:cisco...@hotmail.com>] Sent: Monday, August 10, 2009 11:18 PM To: Michael Ciarfello; ccie_voice@onlinestudylist.com<mailto:ccie_voice@onlinestudylist.com> Subject: RE: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem I can access the tcl from the PSTN. I have 2 vconsole simulators. 1 for PRI and the other for POTS with 2 PRI ports that I connect to te PRI Simulator. What I cannot do is call the TCL scripts internall from any phone. I have everything configured correctly according to Cisoc and IPX. I get a fastbusy. I have dial-peeer voice 10 pots service aa destination-pattern 3210 incoming called-nuimber 3210 session target ipv4:10.11.202.1 <-- Loopback on Router when I do a debug voip dailpeer I see the call going outbound to the correct dial-peer 10, but I never se a inbound matching 3210 the only inbouind I see is the calling number, not the called 3210 is this part working for you ? or anyone ? Respectfully Charles George ________________________________ From: mciarfe...@iplogic.com<mailto:mciarfe...@iplogic.com> To: ccie_voice@onlinestudylist.com<mailto:ccie_voice@onlinestudylist.com> Date: Mon, 10 Aug 2009 22:58:37 -0400 Subject: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem Has anyone gotten 9.2 working from a SIP phone? Doesn't recognize dtmf keypresses. BR2 SCCP phones work fine. PSTN phone works fine. HQ phone over the GK trunk (SCCP or SIP) also doesn't recognize DTMF. HQ calling a BR2 phone - no DTMF heard in handset BR2 phone calling a HQ phone - DTMF heard. Thanks ________________________________ Get free photo software from Windows Live Click here.<http://www.windowslive.com/online/photos?ocid=PID23393::T:WLMTAGL:ON:WL:en-US:SI_PH_software:082009> ________________________________ Windows Liveā¢: Keep your life in sync. Check it out.<http://windowslive.com/explore?ocid=PID23384::T:WLMTAGL:ON:WL:en-US:NF_BR_sync:082009> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com<http://www.ipexpert.com> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com<http://www.ipexpert.com>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com