Hi Charles. I would debug voip dialpeer you can see an outgoing but not an incoming.
Also I guess you could debug cch323 h225 >From memory I believe you¹ll see a timeout message. Best regards Mick From: c george <cisco...@hotmail.com> Date: Wed, 12 Aug 2009 16:56:48 +0000 To: Mick Vaites <m...@pobox.net.uk>, <mciarfe...@iplogic.com>, <ccie_voice@onlinestudylist.com> Subject: RE: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem Thanks, that was it!! What debug command would have shown me the wrong port or incorrect port problem on a dial-peer Respectfully Charles George Date: Wed, 12 Aug 2009 17:40:44 +0100 Subject: Re: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem From: m...@pobox.net.uk To: cisco...@hotmail.com; mciarfe...@iplogic.com; ccie_voice@onlinestudylist.com Hi George You have h225 listening on 1719 default port is 1720. Either change the session target on dp 5 and 6 to : session target ipv4:10.12.202.1:1719 Or remove the h225 listen-port 1719 Best regards Mick From: c george <cisco...@hotmail.com <http://hotmail.com/> > Date: Wed, 12 Aug 2009 15:38:21 +0000 To: <mciarfe...@iplogic.com <http://iplogic.com/> >, <ccie_voice@onlinestudylist.com <http://onlinestudylist.com/> > Subject: Re: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem Micheal, Here goes everything. Even after changing the Code to 12.4 22T2 same issue Respectfully Charles George From: mciarfe...@iplogic.com <http://iplogic.com/> To: cisco...@hotmail.com <http://hotmail.com/> ; ccie_voice@onlinestudylist.com <http://onlinestudylist.com/> Date: Tue, 11 Aug 2009 21:59:42 -0400 Subject: RE: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem Hi Charles, 12.4(22)T2 Can you send me the output from a "debug voip ccapi inout"? And your config? You can attach it in a notepad attachment. From: c george [cisco...@hotmail.com <http://hotmail.com/> ] Sent: Tuesday, August 11, 2009 9:51 PM To: Michael Ciarfello; ccie_voice@onlinestudylist.com <http://onlinestudylist.com/> Subject: RE: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem anyone who can call internally to actovate the ACD script. Please tell me what ver of code is on your router. I can only activate the ACD from the PSTN but not internally. I get a fastbusy Respectfully Charles George From: cisco...@hotmail.com <http://hotmail.com/> To: mciarfe...@iplogic.com <http://iplogic.com/> ; ccie_voice@onlinestudylist.com <http://onlinestudylist.com/> Date: Tue, 11 Aug 2009 03:47:26 +0000 Subject: Re: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem my typo yes I meant VOIP dial-peer is this working for you ? Respectfully Charles George From: mciarfe...@iplogic.com <http://iplogic.com/> To: cisco...@hotmail.com <http://hotmail.com/> ; ccie_voice@onlinestudylist.com <http://onlinestudylist.com/> Date: Mon, 10 Aug 2009 23:24:45 -0400 Subject: RE: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem voip dial-peer not pots. From: c george [cisco...@hotmail.com <http://hotmail.com/> ] Sent: Monday, August 10, 2009 11:18 PM To: Michael Ciarfello; ccie_voice@onlinestudylist.com <http://onlinestudylist.com/> Subject: RE: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem I can access the tcl from the PSTN. I have 2 vconsole simulators. 1 for PRI and the other for POTS with 2 PRI ports that I connect to te PRI Simulator. What I cannot do is call the TCL scripts internall from any phone. I have everything configured correctly according to Cisoc and IPX. I get a fastbusy. I have dial-peeer voice 10 pots service aa destination-pattern 3210 incoming called-nuimber 3210 session target ipv4:10.11.202.1 <-- Loopback on Router when I do a debug voip dailpeer I see the call going outbound to the correct dial-peer 10, but I never se a inbound matching 3210 the only inbouind I see is the calling number, not the called 3210 is this part working for you ? or anyone ? Respectfully Charles George From: mciarfe...@iplogic.com <http://iplogic.com/> To: ccie_voice@onlinestudylist.com <http://onlinestudylist.com/> Date: Mon, 10 Aug 2009 22:58:37 -0400 Subject: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem Has anyone gotten 9.2 working from a SIP phone? Doesn't recognize dtmf keypresses. BR2 SCCP phones work fine. PSTN phone works fine. HQ phone over the GK trunk (SCCP or SIP) also doesn't recognize DTMF. HQ calling a BR2 phone - no DTMF heard in handset BR2 phone calling a HQ phone - DTMF heard. Thanks Get free photo software from Windows Live Click here. <http://www.windowslive.com/online/photos?ocid=PID23393::T:WLMTAGL:ON:WL:en- US:SI_PH_software:082009> Windows Live: Keep your life in sync. Check it out. <http://windowslive.com/explore?ocid=PID23384::T:WLMTAGL:ON:WL:en-US:NF_BR_s ync:082009> Get free photo software from Windows Live Click here. <http://www.windowslive.com/online/photos?ocid=PID23393::T:WLMTAGL:ON:WL:en- US:SI_PH_software:082009> Windows Live: Keep your life in sync. Check it out. <http://windowslive.com/explore?ocid=PID23384::T:WLMTAGL:ON:WL:en-US:NF_BR_s ync:082009> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Get back to school stuff for them and cashback for you. Try Bing now. <http://www.bing.com/cashback?form=MSHYCB&publ=WLHMTAG&crea=TEXT_MSHYCB_Back ToSchool_Cashback_BTSCashback_1x1>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
