Below works for me. You should be able to call internally from within
CME site
dial-peer voice 223 voip
service aa
destination-pattern 3210
session target ipv4:10.11.202.1
incoming called-number 3210
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of c george
Sent: Wednesday, 12 August 2009 11:52 AM
To: mciarfe...@iplogic.com; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay
problem
anyone who can call internally to actovate the ACD script. Please tell
me what ver of code is on your router.
I can only activate the ACD from the PSTN but not internally. I get a
fastbusy
Respectfully Charles George
________________________________
From: cisco...@hotmail.com
To: mciarfe...@iplogic.com; ccie_voice@onlinestudylist.com
Date: Tue, 11 Aug 2009 03:47:26 +0000
Subject: Re: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay
problem
my typo yes I meant VOIP dial-peer
is this working for you ?
Respectfully Charles George
________________________________
From: mciarfe...@iplogic.com
To: cisco...@hotmail.com; ccie_voice@onlinestudylist.com
Date: Mon, 10 Aug 2009 23:24:45 -0400
Subject: RE: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay
problem
voip dial-peer not pots.
________________________________
From: c george [cisco...@hotmail.com]
Sent: Monday, August 10, 2009 11:18 PM
To: Michael Ciarfello; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay
problem
I can access the tcl from the PSTN. I have 2 vconsole simulators. 1
for PRI and the other for POTS with 2 PRI ports that I connect to te PRI
Simulator.
What I cannot do is call the TCL scripts internall from any phone. I
have everything configured correctly according to Cisoc and IPX. I get a
fastbusy.
I have
dial-peeer voice 10 pots
service aa
destination-pattern 3210
incoming called-nuimber 3210
session target ipv4:10.11.202.1 <-- Loopback on Router
when I do a debug voip dailpeer I see the call going outbound to the
correct dial-peer 10, but I never se a inbound matching 3210
the only inbouind I see is the calling number, not the called 3210
is this part working for you ? or anyone ?
Respectfully Charles George
________________________________
From: mciarfe...@iplogic.com
To: ccie_voice@onlinestudylist.com
Date: Mon, 10 Aug 2009 22:58:37 -0400
Subject: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay
problem
Has anyone gotten 9.2 working from a SIP phone? Doesn't recognize dtmf
keypresses.
BR2 SCCP phones work fine. PSTN phone works fine.
HQ phone over the GK trunk (SCCP or SIP) also doesn't recognize DTMF.
HQ calling a BR2 phone - no DTMF heard in handset
BR2 phone calling a HQ phone - DTMF heard.
Thanks
________________________________
Get free photo software from Windows Live Click here.
<http://www.windowslive.com/online/photos?ocid=PID23393::T:WLMTAGL:ON:WL
:en-US:SI_PH_software:082009>
________________________________
Windows Live(tm): Keep your life in sync. Check it out.
<http://windowslive.com/explore?ocid=PID23384::T:WLMTAGL:ON:WL:en-US:NF_
BR_sync:082009>
________________________________
Get free photo software from Windows Live Click here.
<http://www.windowslive.com/online/photos?ocid=PID23393::T:WLMTAGL:ON:WL
:en-US:SI_PH_software:082009>
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
