What does your full h323 associated config look like. I vaguely remember when doing this that some previous requirement (GK?) meant I¹d changed the port h323 was listening on to 1820. That being the case you¹ll need to add the port to the session target command.
Session target ipv4:10.11.202.1:1820 Also I¹d be tempted to use the loopback address and not the lan address. Best regards Mick From: Aamir Panjwani <aamir.panjw...@ivision.com.au> Date: Wed, 12 Aug 2009 12:02:16 +1000 To: c george <cisco...@hotmail.com>, <mciarfe...@iplogic.com>, <ccie_voice@onlinestudylist.com> Subject: Re: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem Below works for me. You should be able to call internally from within CME site dial-peer voice 223 voip service aa destination-pattern 3210 session target ipv4:10.11.202.1 incoming called-number 3210 dtmf-relay h245-alphanumeric codec g711ulaw no vad From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of c george Sent: Wednesday, 12 August 2009 11:52 AM To: mciarfe...@iplogic.com; ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem anyone who can call internally to actovate the ACD script. Please tell me what ver of code is on your router. I can only activate the ACD from the PSTN but not internally. I get a fastbusy Respectfully Charles George From: cisco...@hotmail.com To: mciarfe...@iplogic.com; ccie_voice@onlinestudylist.com Date: Tue, 11 Aug 2009 03:47:26 +0000 Subject: Re: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem my typo yes I meant VOIP dial-peer is this working for you ? Respectfully Charles George From: mciarfe...@iplogic.com To: cisco...@hotmail.com; ccie_voice@onlinestudylist.com Date: Mon, 10 Aug 2009 23:24:45 -0400 Subject: RE: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem voip dial-peer not pots. From: c george [cisco...@hotmail.com] Sent: Monday, August 10, 2009 11:18 PM To: Michael Ciarfello; ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem I can access the tcl from the PSTN. I have 2 vconsole simulators. 1 for PRI and the other for POTS with 2 PRI ports that I connect to te PRI Simulator. What I cannot do is call the TCL scripts internall from any phone. I have everything configured correctly according to Cisoc and IPX. I get a fastbusy. I have dial-peeer voice 10 pots service aa destination-pattern 3210 incoming called-nuimber 3210 session target ipv4:10.11.202.1 <-- Loopback on Router when I do a debug voip dailpeer I see the call going outbound to the correct dial-peer 10, but I never se a inbound matching 3210 the only inbouind I see is the calling number, not the called 3210 is this part working for you ? or anyone ? Respectfully Charles George From: mciarfe...@iplogic.com To: ccie_voice@onlinestudylist.com Date: Mon, 10 Aug 2009 22:58:37 -0400 Subject: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem Has anyone gotten 9.2 working from a SIP phone? Doesn't recognize dtmf keypresses. BR2 SCCP phones work fine. PSTN phone works fine. HQ phone over the GK trunk (SCCP or SIP) also doesn't recognize DTMF. HQ calling a BR2 phone - no DTMF heard in handset BR2 phone calling a HQ phone - DTMF heard. Thanks Get free photo software from Windows Live Click here. <http://www.windowslive.com/online/photos?ocid=PID23393::T:WLMTAGL:ON:WL:en- US:SI_PH_software:082009> Windows Live: Keep your life in sync. Check it out. <http://windowslive.com/explore?ocid=PID23384::T:WLMTAGL:ON:WL:en-US:NF_BR_s ync:082009> Get free photo software from Windows Live Click here. <http://www.windowslive.com/online/photos?ocid=PID23393::T:WLMTAGL:ON:WL:en- US:SI_PH_software:082009> ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
