OK, so I configured the + to be sent... and I see it on an H.323 gateway:
BR2#
BR2#
Aug 20 20:22:43.375: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8 callref = 0x009D
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Display i = 'HQ Ph1'
Calling Party Number i = 0x0081, '+12123945001'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x91, '33132143002'
Plan:ISDN, Type:International
Aug 20 20:22:43.375: ISDN Se0/0/0:15 Q931: Received SETUP callref =
0x809D callID = 0x000D switch = primary-net5 interface = User
BR2#
Aug 20 20:22:43.387: ISDN Se0/0/0:15 Q931: TX -> CALL_PROC pd = 8
callref = 0x809D
Channel ID i = 0xA98381
Exclusive, Channel 1
Aug 20 20:22:43.507: ISDN Se0/0/0:15 Q931: TX -> ALERTING pd = 8
callref = 0x809D
BR2#
Aug 20 20:22:48.003: ISDN Se0/0/0:15 Q931: RX <- DISCONNECT pd = 8
callref = 0x009D
Cause i = 0x8290 - Normal call clearing
Aug 20 20:22:48.007: ISDN Se0/0/0:15 Q931: TX -> RELEASE pd = 8
callref = 0x809D
Aug 20 20:22:48.015: ISDN Se0/0/0:15 Q931: RX <- RELEASE_COMP pd = 8
callref = 0x009D
BR2#
BR2#
But it is not showing up on the phone....
The Device Pool for that site has the + for International calls, but
they aren't showing up.... any ideas?
Jonathan
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
