Or, it is not supported... http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmfeat/fscallpn.pdf
great. J On Thu, Aug 20, 2009 at 3:37 PM, Jonathan Charles<[email protected]> wrote: > Also, there are H.323 translations on the gateway: > > > ! > voice translation-rule 1 > rule 1 /3313214\(3...\)$/ /\1/ > ! > voice translation-rule 2 > rule 1 /^\(3...\)$/ /+3313214\1/ > ! > ! > voice translation-profile ANI > translate calling 2 > ! > voice translation-profile DNIS > translate called 1 > ! > voice-port 0/0/0:15 > translation-profile incoming DNIS > translation-profile outgoing ANI > ! > > BR2#test voice translation-rule 2 3002 > Matched with rule 1 > Original number: 3002 Translated number: +33132143002 > Original number type: none Translated number type: none > Original number plan: none Translated number plan: none > > BR2# > > But when I call out: > > Aug 20 20:35:59.261: ISDN Se0/0/0:15 Q931: Applying typeplan for > sw-type 0x12 is 0x0 0x0, Calling num 33132143002 > Aug 20 20:35:59.261: ISDN Se0/0/0:15 Q931: Sending SETUP callref = > 0x0083 callID = 0x8004 switch = primary-net5 interface = User > Aug 20 20:35:59.261: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8 callref = > 0x0083 > Bearer Capability i = 0x8090A3 > Standard = CCITT > Transfer Capability = Speech > Transfer Mode = Circuit > Transfer Rate = 64 kbit/s > Channel ID i = 0xA98386 > Exclusive, Channel 6 > Calling Party Number i = 0x0081, '33132143002' > Plan:Unknown, Type:Unknown > Called Party Number i = 0x80, '999' > Plan:Unknown, Type:Unknown > BR2# > Aug 20 20:35:59.293: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8 > callref = 0x8083 > Channel ID i = 0xA98386 > Exclusive, Channel 6 > Aug 20 20:35:59.305: ISDN Se0/0/0:15 Q931: RX <- ALERTING pd = 8 > callref = 0x8083 > Progress Ind i = 0x8188 - In-band info or appropriate now available > BR2# > Aug 20 20:36:02.897: ISDN Se0/0/0:15 Q931: TX -> DISCONNECT pd = 8 > callref = 0x0083 > Cause i = 0x8090 - Normal call clearing > Aug 20 20:36:02.905: ISDN Se0/0/0:15 Q931: RX <- RELEASE pd = 8 > callref = 0x8083 > Aug 20 20:36:02.909: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd = 8 > callref = 0x0083 > > No plus sign... > > > Why? > > On Thu, Aug 20, 2009 at 3:32 PM, Jonathan Charles<[email protected]> wrote: >> OK, so I configured the + to be sent... and I see it on an H.323 gateway: >> >> >> BR2# >> BR2# >> Aug 20 20:22:43.375: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8 callref = >> 0x009D >> Bearer Capability i = 0x8090A3 >> Standard = CCITT >> Transfer Capability = Speech >> Transfer Mode = Circuit >> Transfer Rate = 64 kbit/s >> Channel ID i = 0xA98381 >> Exclusive, Channel 1 >> Display i = 'HQ Ph1' >> Calling Party Number i = 0x0081, '+12123945001' >> Plan:Unknown, Type:Unknown >> Called Party Number i = 0x91, '33132143002' >> Plan:ISDN, Type:International >> Aug 20 20:22:43.375: ISDN Se0/0/0:15 Q931: Received SETUP callref = >> 0x809D callID = 0x000D switch = primary-net5 interface = User >> BR2# >> Aug 20 20:22:43.387: ISDN Se0/0/0:15 Q931: TX -> CALL_PROC pd = 8 >> callref = 0x809D >> Channel ID i = 0xA98381 >> Exclusive, Channel 1 >> Aug 20 20:22:43.507: ISDN Se0/0/0:15 Q931: TX -> ALERTING pd = 8 >> callref = 0x809D >> BR2# >> Aug 20 20:22:48.003: ISDN Se0/0/0:15 Q931: RX <- DISCONNECT pd = 8 >> callref = 0x009D >> Cause i = 0x8290 - Normal call clearing >> Aug 20 20:22:48.007: ISDN Se0/0/0:15 Q931: TX -> RELEASE pd = 8 >> callref = 0x809D >> Aug 20 20:22:48.015: ISDN Se0/0/0:15 Q931: RX <- RELEASE_COMP pd = 8 >> callref = 0x009D >> BR2# >> BR2# >> >> But it is not showing up on the phone.... >> >> The Device Pool for that site has the + for International calls, but >> they aren't showing up.... any ideas? >> >> >> >> Jonathan >> > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
