Also, there are H.323 translations on the gateway:
!
voice translation-rule 1
rule 1 /3313214\(3...\)$/ /\1/
!
voice translation-rule 2
rule 1 /^\(3...\)$/ /+3313214\1/
!
!
voice translation-profile ANI
translate calling 2
!
voice translation-profile DNIS
translate called 1
!
voice-port 0/0/0:15
translation-profile incoming DNIS
translation-profile outgoing ANI
!
BR2#test voice translation-rule 2 3002
Matched with rule 1
Original number: 3002 Translated number: +33132143002
Original number type: none Translated number type: none
Original number plan: none Translated number plan: none
BR2#
But when I call out:
Aug 20 20:35:59.261: ISDN Se0/0/0:15 Q931: Applying typeplan for
sw-type 0x12 is 0x0 0x0, Calling num 33132143002
Aug 20 20:35:59.261: ISDN Se0/0/0:15 Q931: Sending SETUP callref =
0x0083 callID = 0x8004 switch = primary-net5 interface = User
Aug 20 20:35:59.261: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8 callref = 0x0083
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98386
Exclusive, Channel 6
Calling Party Number i = 0x0081, '33132143002'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '999'
Plan:Unknown, Type:Unknown
BR2#
Aug 20 20:35:59.293: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8
callref = 0x8083
Channel ID i = 0xA98386
Exclusive, Channel 6
Aug 20 20:35:59.305: ISDN Se0/0/0:15 Q931: RX <- ALERTING pd = 8
callref = 0x8083
Progress Ind i = 0x8188 - In-band info or appropriate now available
BR2#
Aug 20 20:36:02.897: ISDN Se0/0/0:15 Q931: TX -> DISCONNECT pd = 8
callref = 0x0083
Cause i = 0x8090 - Normal call clearing
Aug 20 20:36:02.905: ISDN Se0/0/0:15 Q931: RX <- RELEASE pd = 8
callref = 0x8083
Aug 20 20:36:02.909: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd = 8
callref = 0x0083
No plus sign...
Why?
On Thu, Aug 20, 2009 at 3:32 PM, Jonathan Charles<[email protected]> wrote:
> OK, so I configured the + to be sent... and I see it on an H.323 gateway:
>
>
> BR2#
> BR2#
> Aug 20 20:22:43.375: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8 callref =
> 0x009D
> Bearer Capability i = 0x8090A3
> Standard = CCITT
> Transfer Capability = Speech
> Transfer Mode = Circuit
> Transfer Rate = 64 kbit/s
> Channel ID i = 0xA98381
> Exclusive, Channel 1
> Display i = 'HQ Ph1'
> Calling Party Number i = 0x0081, '+12123945001'
> Plan:Unknown, Type:Unknown
> Called Party Number i = 0x91, '33132143002'
> Plan:ISDN, Type:International
> Aug 20 20:22:43.375: ISDN Se0/0/0:15 Q931: Received SETUP callref =
> 0x809D callID = 0x000D switch = primary-net5 interface = User
> BR2#
> Aug 20 20:22:43.387: ISDN Se0/0/0:15 Q931: TX -> CALL_PROC pd = 8
> callref = 0x809D
> Channel ID i = 0xA98381
> Exclusive, Channel 1
> Aug 20 20:22:43.507: ISDN Se0/0/0:15 Q931: TX -> ALERTING pd = 8
> callref = 0x809D
> BR2#
> Aug 20 20:22:48.003: ISDN Se0/0/0:15 Q931: RX <- DISCONNECT pd = 8
> callref = 0x009D
> Cause i = 0x8290 - Normal call clearing
> Aug 20 20:22:48.007: ISDN Se0/0/0:15 Q931: TX -> RELEASE pd = 8
> callref = 0x809D
> Aug 20 20:22:48.015: ISDN Se0/0/0:15 Q931: RX <- RELEASE_COMP pd = 8
> callref = 0x009D
> BR2#
> BR2#
>
> But it is not showing up on the phone....
>
> The Device Pool for that site has the + for International calls, but
> they aren't showing up.... any ideas?
>
>
>
> Jonathan
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
