It is question 5.12 in Lab 5 volume 1. I have bind command and all Dial Peer configured, I will check the CCAPI output.
From: Michael Ciarfello [mailto:[email protected]] Sent: Sunday, 4 October 2009 5:27 PM To: Kumar, Narinder; OSL Group Subject: RE: [OSL | CCIE_Voice] MVA Issue Seemed if I didn't have the h323 gateway voip bind command on one of the interfaces, I got the same symptoms. The lab (volume2, lab 3) was using all MGCP (I think) and didn't put the h323 bind command on. That seemed to make a difference. Other than that, what does ccapi show? And what is your design look like. What question, what lab? ________________________________ From: [email protected] [[email protected]] On Behalf Of Kumar, Narinder [[email protected]] Sent: Saturday, October 03, 2009 11:51 PM To: OSL Group Subject: [OSL | CCIE_Voice] MVA Issue I am having some issues with MVA . When I dial in after keying in my pin number I can turn on or off mobility that is working fine but I can't dial out any number I try dialling internal numbers i.e 3001, 5001 and well as PSTN number as soon as finish dialling the number after pressing # the call drops. I tried changing the inbound CSS in the service parameter to " Remote destination profile + line calling search space" but no luck. Anyone have any pointers what I am doing wrong ? Thanks Narinder ________________________________ CONFIDENTIALITY - The information contained in this electronic mail message is confidential and is intended solely for the addressee(s). If you are not an authorised recipient of this message please contact UXC Getronics Australia immediately by reply email and destroy/delete this message from your computer. Any unauthorised form of reproduction of this message, or part thereof, is strictly prohibited. DISCLAIMER - Unless specifically indicated otherwise, the views and opinions expressed in this email are those of the sender and not UXC Getronics Australia. While we endeavour to protect our network from computer viruses, UXC Getronics Australia does not warrant that this email or any attachments are free of viruses or any other defects or errors. It is the duty of the recipient to virus scan and otherwise test any information contained in this email before loading onto any computer system. ________________________________ CONFIDENTIALITY - The information contained in this electronic mail message is confidential and is intended solely for the addressee(s). If you are not an authorised recipient of this message please contact UXC Getronics Australia immediately by reply email and destroy/delete this message from your computer. Any unauthorised form of reproduction of this message, or part thereof, is strictly prohibited. DISCLAIMER - Unless specifically indicated otherwise, the views and opinions expressed in this email are those of the sender and not UXC Getronics Australia. While we endeavour to protect our network from computer viruses, UXC Getronics Australia does not warrant that this email or any attachments are free of viruses or any other defects or errors. It is the duty of the recipient to virus scan and otherwise test any information contained in this email before loading onto any computer system.
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
