So you configured MVA VXML script on a separate gateway or on the same
gateway where mgcp is configured?
From: Kumar, Narinder [mailto:narinder.ku...@uxcg.com.au]
Sent: Monday, 5 October 2009 2:44 PM
To: Michael Ciarfello; Aamir Panjwani; OSL Group
Subject: RE: [OSL | CCIE_Voice] MVA Issue
Thanks Michael, I did it and works fine.
From: Michael Ciarfello [mailto:mciarfe...@iplogic.com]
Sent: Monday, 5 October 2009 11:14 AM
To: Kumar, Narinder; Aamir Panjwani; OSL Group
Subject: RE: [OSL | CCIE_Voice] MVA Issue
Convert it back to MGCP and practice the hairpinning mode also. I got
it to work by putting MVA on the MGCP router. Little tricky, but the
SRND or F&S guide gives great hints. Also practice it by putting MVA on
a separate router that runs H323, maybe PSTN-WAN router if you have your
own equipment. Not sure if you have access to it in the PLs.
________________________________
From: Kumar, Narinder [narinder.ku...@uxcg.com.au]
Sent: Sunday, October 04, 2009 5:16 AM
To: Aamir Panjwani; Michael Ciarfello; OSL Group
Subject: RE: [OSL | CCIE_Voice] MVA Issue
Just fixed it, had issues with one of the dialpeer , as this gateway was
earlier MGCP and I converted into H323 for MVA.
Thanks all for help.
From: Aamir Panjwani [mailto:aamir.panjw...@ivision.com.au]
Sent: Sunday, 4 October 2009 8:09 PM
To: Kumar, Narinder; Michael Ciarfello; OSL Group
Subject: RE: [OSL | CCIE_Voice] MVA Issue
Make sure CSS (not rerouting CSS which is used for SNR) on the remote
destination profile has visibility of internal DN's partition as well as
PSTN route pattern partitions
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Kumar,
Narinder
Sent: Sunday, 4 October 2009 7:29 PM
To: Michael Ciarfello; OSL Group
Subject: Re: [OSL | CCIE_Voice] MVA Issue
It is question 5.12 in Lab 5 volume 1.
I have bind command and all Dial Peer configured, I will check the CCAPI
output.
From: Michael Ciarfello [mailto:mciarfe...@iplogic.com]
Sent: Sunday, 4 October 2009 5:27 PM
To: Kumar, Narinder; OSL Group
Subject: RE: [OSL | CCIE_Voice] MVA Issue
Seemed if I didn't have the h323 gateway voip bind command on one of the
interfaces, I got the same symptoms. The lab (volume2, lab 3) was using
all MGCP (I think) and didn't put the h323 bind command on. That seemed
to make a difference.
Other than that, what does ccapi show? And what is your design look
like. What question, what lab?
________________________________
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of Kumar, Narinder
[narinder.ku...@uxcg.com.au]
Sent: Saturday, October 03, 2009 11:51 PM
To: OSL Group
Subject: [OSL | CCIE_Voice] MVA Issue
I am having some issues with MVA .
When I dial in after keying in my pin number I can turn on or off
mobility that is working fine but I can't dial out any number I try
dialling internal numbers i.e 3001, 5001 and well as PSTN number as soon
as finish dialling the number after pressing # the call drops.
I tried changing the inbound CSS in the service parameter to " Remote
destination profile + line calling search space" but no luck.
Anyone have any pointers what I am doing wrong ?
Thanks
Narinder
________________________________
CONFIDENTIALITY - The information contained in this electronic mail
message is confidential and is intended solely for the addressee(s). If
you are not an authorised recipient of this message please contact UXC
Getronics Australia immediately by reply email and destroy/delete this
message from your computer. Any unauthorised form of reproduction of
this message, or part thereof, is strictly prohibited.
DISCLAIMER - Unless specifically indicated otherwise, the views and
opinions expressed in this email are those of the sender and not UXC
Getronics Australia. While we endeavour to protect our network from
computer viruses, UXC Getronics Australia does not warrant that this
email or any attachments are free of viruses or any other defects or
errors. It is the duty of the recipient to virus scan and otherwise test
any information contained in this email before loading onto any computer
system.
________________________________
CONFIDENTIALITY - The information contained in this electronic mail
message is confidential and is intended solely for the addressee(s). If
you are not an authorised recipient of this message please contact UXC
Getronics Australia immediately by reply email and destroy/delete this
message from your computer. Any unauthorised form of reproduction of
this message, or part thereof, is strictly prohibited.
DISCLAIMER - Unless specifically indicated otherwise, the views and
opinions expressed in this email are those of the sender and not UXC
Getronics Australia. While we endeavour to protect our network from
computer viruses, UXC Getronics Australia does not warrant that this
email or any attachments are free of viruses or any other defects or
errors. It is the duty of the recipient to virus scan and otherwise test
any information contained in this email before loading onto any computer
system.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
________________________________
CONFIDENTIALITY - The information contained in this electronic mail
message is confidential and is intended solely for the addressee(s). If
you are not an authorised recipient of this message please contact UXC
Getronics Australia immediately by reply email and destroy/delete this
message from your computer. Any unauthorised form of reproduction of
this message, or part thereof, is strictly prohibited.
DISCLAIMER - Unless specifically indicated otherwise, the views and
opinions expressed in this email are those of the sender and not UXC
Getronics Australia. While we endeavour to protect our network from
computer viruses, UXC Getronics Australia does not warrant that this
email or any attachments are free of viruses or any other defects or
errors. It is the duty of the recipient to virus scan and otherwise test
any information contained in this email before loading onto any computer
system.
________________________________
CONFIDENTIALITY - The information contained in this electronic mail
message is confidential and is intended solely for the addressee(s). If
you are not an authorised recipient of this message please contact UXC
Getronics Australia immediately by reply email and destroy/delete this
message from your computer. Any unauthorised form of reproduction of
this message, or part thereof, is strictly prohibited.
DISCLAIMER - Unless specifically indicated otherwise, the views and
opinions expressed in this email are those of the sender and not UXC
Getronics Australia. While we endeavour to protect our network from
computer viruses, UXC Getronics Australia does not warrant that this
email or any attachments are free of viruses or any other defects or
errors. It is the duty of the recipient to virus scan and otherwise test
any information contained in this email before loading onto any computer
system.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
