Make sure CSS (not rerouting CSS which is used for SNR) on the remote
destination profile has visibility of internal DN's partition as well as
PSTN route pattern partitions
From: [email protected]
[mailto:[email protected]] On Behalf Of Kumar,
Narinder
Sent: Sunday, 4 October 2009 7:29 PM
To: Michael Ciarfello; OSL Group
Subject: Re: [OSL | CCIE_Voice] MVA Issue
It is question 5.12 in Lab 5 volume 1.
I have bind command and all Dial Peer configured, I will check the CCAPI
output.
From: Michael Ciarfello [mailto:[email protected]]
Sent: Sunday, 4 October 2009 5:27 PM
To: Kumar, Narinder; OSL Group
Subject: RE: [OSL | CCIE_Voice] MVA Issue
Seemed if I didn't have the h323 gateway voip bind command on one of the
interfaces, I got the same symptoms. The lab (volume2, lab 3) was using
all MGCP (I think) and didn't put the h323 bind command on. That seemed
to make a difference.
Other than that, what does ccapi show? And what is your design look
like. What question, what lab?
________________________________
From: [email protected]
[[email protected]] On Behalf Of Kumar, Narinder
[[email protected]]
Sent: Saturday, October 03, 2009 11:51 PM
To: OSL Group
Subject: [OSL | CCIE_Voice] MVA Issue
I am having some issues with MVA .
When I dial in after keying in my pin number I can turn on or off
mobility that is working fine but I can't dial out any number I try
dialling internal numbers i.e 3001, 5001 and well as PSTN number as soon
as finish dialling the number after pressing # the call drops.
I tried changing the inbound CSS in the service parameter to " Remote
destination profile + line calling search space" but no luck.
Anyone have any pointers what I am doing wrong ?
Thanks
Narinder
________________________________
CONFIDENTIALITY - The information contained in this electronic mail
message is confidential and is intended solely for the addressee(s). If
you are not an authorised recipient of this message please contact UXC
Getronics Australia immediately by reply email and destroy/delete this
message from your computer. Any unauthorised form of reproduction of
this message, or part thereof, is strictly prohibited.
DISCLAIMER - Unless specifically indicated otherwise, the views and
opinions expressed in this email are those of the sender and not UXC
Getronics Australia. While we endeavour to protect our network from
computer viruses, UXC Getronics Australia does not warrant that this
email or any attachments are free of viruses or any other defects or
errors. It is the duty of the recipient to virus scan and otherwise test
any information contained in this email before loading onto any computer
system.
________________________________
CONFIDENTIALITY - The information contained in this electronic mail
message is confidential and is intended solely for the addressee(s). If
you are not an authorised recipient of this message please contact UXC
Getronics Australia immediately by reply email and destroy/delete this
message from your computer. Any unauthorised form of reproduction of
this message, or part thereof, is strictly prohibited.
DISCLAIMER - Unless specifically indicated otherwise, the views and
opinions expressed in this email are those of the sender and not UXC
Getronics Australia. While we endeavour to protect our network from
computer viruses, UXC Getronics Australia does not warrant that this
email or any attachments are free of viruses or any other defects or
errors. It is the duty of the recipient to virus scan and otherwise test
any information contained in this email before loading onto any computer
system.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
